ADE7758 xWATTHR Measurement:

Hello All,

I have communicated with ADE7758 with my Host MCU.

SPI Works fine and to Read/Write Default Values. From HOST ADE7758 to Host MCU.

I am giving 0 to +/- 500mV to Voltage  and 0 to  +/- 500mV to Current channel(s)

And able to read xVRMS and xIRMS resgiter.

I have able to read xWATTHR with

1) LCYCMODE Register  , RSTREAD =1 Default Mode

2) LCYCMODE Register  , RSTREAD =0, LWATT = 1 and LINECYC  = 0x10.

But I am unable to understand ..

1)How to Convert xWATTHR in to real Watt. With Line Accumulation or With RSTREAD in Default.

2) Or If suppose, AVRMS = 0x1243412 and AIRMS = 0xCBCD12. What should be in AWATTHR Register.

--

Thanks..

Parents
  • ValeriaToff .. Thanks .. to you..

     

    Can you update me as Below ?

    1) How to Convert xWATTHR in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

    2) How to Convert xVA-Hour in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

    3) How to Convert xVAR-Hour in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

     

    With ADE7758.

Reply
  • ValeriaToff .. Thanks .. to you..

     

    Can you update me as Below ?

    1) How to Convert xWATTHR in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

    2) How to Convert xVA-Hour in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

    3) How to Convert xVAR-Hour in to real Watt. With Line Accumulation or With RSTREAD in Default.

    From which Equation in Datasheet.

     

    With ADE7758.

Children
No Data