Post Go back to editing

Question for Gesture Sensor ADUX1020

Dear Sir/Madam,

I got the interested in your gesture sensor evalboard ADUX1020-EVAL-SDP and ADUM1020-EVALZ-LED.

What voltage and current should we add for ADUM1020-EVALZ-LED?

Up to 12V(AC to DC adaptor),OK?

Your label enclosed at ADUM1020-EVALZ-LED package show the 2A total pulse current on there.

Does this mean that 2A need, correct?

I am trying to come on the external LED board.

There is DC plug on the PCB.

But there was not instruction on UG1022.

Please advice us about above my questions!

Dear EZ Manager,

If this sled doesnt fit on there place, then please replace this to correct place

Thanks Kaos

  • Note 12V could not supply to this due to that eval board SDP-B was broken also my PC/ USB BUS.......

    ADP7102 and FDN335/FET can accept 12V no problem.

    J2 on ADUX1020 MCM board was also offed=opened.

    Please advice us !!!

    Thanks KAOS

  • Hi Kaos,

    My apologies that currently there is no support for the ADUX1020 board on the Engineering Zone community currently. Could you please send a mail to processor.support@analog.com with your questions, where it will be forwarded to the correct team who will be able to help you.

    Regards,

    Neeraj