• Replies 6 replies
  • Subscribers 4 subscribers
  • Views 717 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    




















	
	
			
	
		
		
	
	
		

		
Video Capture: adi_dev_Video_Open failed error



		

			

									
					    npai2
					
							

			
				
									
											
			
			
				
  •  Analog Employees  

			
			
			    	
			                    
                
				                on Apr 6, 2016 
				
			
			
		


				
		

		    		    
		    
		    	
			
We have a ADZS-BF707-BLIP2 board to demonstrate VOS functionality but there is an error occurring with it and I cannot obtain any image in any of three different computers I tested it, although it has worked before.
 
 The returning error is ‘ERROR: Video Capture: adi_dev_Video_Open failed’ as in the attached compacted image. This message occurs no matter the chosen sensor (omnivision or Aptina) nor the flashed application (VOS indoor or VOS outdoor), always using the GUI application.
 
 What could I try to put this board back to work?
 
 

								


				
				
		

			
						
									
									
						
						
			
			
			
			
		


        
        

					

			






	

		
	

















	

	

					



			








	
	
	
	



Parents
	
    
	

  • 
	
    






    
	
    
		
    
							
					
    
		
    
			
											
			
				
									
							        
			
			
			
      
            
			                            
                        
                on Apr 21, 2016 2:46 AM
            
            
					
      
	
      

		
		
      
					
      Hi,
      
 
      I've installed BSP again and error persists. Even with another example, FrameCapture_ClassDriver_OV7692, it got an error when executing 'adi_dev_Video_Open' function.
      
 
      One thing I noticed, but it doesn't seem to be related to this problem, are some warnings during loading the firmware through CCES and emulator, as copied below. I've already tried emulator and Flash runs.
      
 
      ERROR: [Error xml1013] [emulator] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
      
 
      ERROR: [Error xml1013] [windows creation] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
      
 
      Loading application: "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\FrameCapture_ClassDriver_OV7692\Debug\FrameCapture_ClassDriver_OV7692.dxe"
      
 
      ERROR: [Error xml1013] [windows creation] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
      
 
      Load complete.
      
 
      Core clock:      384000000 Hz
      
 
      System clock:    192000000 Hz
      
 
      System clock 0:   96000000 Hz
      
 
      System clock 1:  192000000 Hz
      
 
      adi_dev_Video_Open failed
      
 
      Error in configuring the sensor.
      
			
      

		
		
		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      






      
	
      
		
      
							
					
      
		
      
			
											
			
				
									
							        
			
			
			
        
            
			                            
                        
                on Apr 21, 2016 2:46 AM
            
            
					
        
	
        

		
		
        
					
        Hi,
        
 
        I've installed BSP again and error persists. Even with another example, FrameCapture_ClassDriver_OV7692, it got an error when executing 'adi_dev_Video_Open' function.
        
 
        One thing I noticed, but it doesn't seem to be related to this problem, are some warnings during loading the firmware through CCES and emulator, as copied below. I've already tried emulator and Flash runs.
        
 
        ERROR: [Error xml1013] [emulator] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
        
 
        ERROR: [Error xml1013] [windows creation] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
        
 
        Loading application: "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\FrameCapture_ClassDriver_OV7692\Debug\FrameCapture_ClassDriver_OV7692.dxe"
        
 
        ERROR: [Error xml1013] [windows creation] Unable to process custom action for register "DMC0_PHY_CTL1" in custom board file "C:\Documents and Settings\Administrador\cces\2.0.0\examples\bf707_blip2_1.0.0\Power_On_Self_Test\ADZS-BF707-BLIP2-proc.xml", because there already exists a register definition for name "DMC0_PHY_CTL1". You cannot modify a register from the base processor definition and any additional custom registers must be uniquely named.
        
 
        Load complete.
        
 
        Core clock:      384000000 Hz
        
 
        System clock:    192000000 Hz
        
 
        System clock 0:   96000000 Hz
        
 
        System clock 1:  192000000 Hz
        
 
        adi_dev_Video_Open failed
        
 
        Error in configuring the sensor.
        
			
        

		
		
		
		
	
        
	
        
		
        
			
		
        
	
        
	
        
		
						
				
				
						
				
				
		
		
        
			
		
        
	
        

        

        • 


      


Children
	
      No Data