Post Go back to editing

BLIP2 SPI output

Currently, I am trying to get some data from WSN via SPI by running ADVisionSensorController,

but I can not access it.

After issuing Enable VOS from GUI,

via SPI,

First command) Issue 0x00000001

Next command) Issue 0x00000005

Next command) Issue 0x00000003

 

I am waiting for that response from BLIP2, but I can only read 0xFFFFFFFF.

 

Could you let me know what kind of setting is correct?

Below is the current setting.

SPI Master is an Arduino Uno.

SPI Configuration is LSB FIRST.

CLOCL_DIV is 4.

  

Firmware is using VOS_Outdoors_realtime_BLIP2.dxe.

And it is also GUI, In GeneralConfiguration.xml,

DebugMode : true

UnifiedGUI : true

BlobCoordinatesViaUSB : false

Thank you for your help as always.

Best regards,

Sofy 

Parents
  • Hello, Sudheer,

    Eventually, WSN_INT signal is toggled.

    It seems the reason is bus traffic or scheduling between GUI apps communication and SPI communication.

    Because when toggle "enable/disable VOS button" on GUI apps, asserting WSN_INT signal is happened.

    Thank you for your help as always.

    Best regards,

    Sofy

Reply
  • Hello, Sudheer,

    Eventually, WSN_INT signal is toggled.

    It seems the reason is bus traffic or scheduling between GUI apps communication and SPI communication.

    Because when toggle "enable/disable VOS button" on GUI apps, asserting WSN_INT signal is happened.

    Thank you for your help as always.

    Best regards,

    Sofy

Children
No Data