EVAL-ADXL345Z-DB ARM C/C++ Compiler Issue

Dear Analog Support:

    I was so excited about getting the EVAL-ADXL345Z-DB as it had just about everything I needed to prototype a product that I am developing. However, when I launched the Keil uVision IDE Tool I get the following error:

"The ARM (t)c/c++ Compiler has encountered a problem and needs to close.  We are sorry for the inconvenience."

Then I am asked the usual prompt of do I want to send a report to Microsoft or not. I am not sure where the report would go other than an informational blackhole. After uninstalling and re-installing the Keil tool for the EVAL-ADXL345Z-DB platform, the issue still persisted. I am running on Windows XP, but is there a separate step to install the C/C++ compiler or is there something else that I should try other than uninstalling and re-installing the tool?

   I am able to download code to this nice Dev Board using the "uploader" tool.

Regards,


Manny

Parents
  • Hi Andy,

       Sorry about the delay in responding, but this IS an issue that I am having with an ADI Embedded Processor, the ADuC7024 that is included with this Dev. Board. Hence the issue with the C/C++ compiler, which would be used to compile code to program this processor. In this dev board, aside from the controller there is an accelerometer, some LEDs and a microSD card to log data; in case you may not be familiar with this system.

       I was able to goto the Keil website to download their latest IDE and I am able to build code. However, there were lots of issues trying to build the example "datalogger" that comes with the evaluation board. Is it possible to have someone take a look at just being able to build the ADI "datalogger" code with the latest version of the Keil tool?

    Regards,

    Manny

Reply
  • Hi Andy,

       Sorry about the delay in responding, but this IS an issue that I am having with an ADI Embedded Processor, the ADuC7024 that is included with this Dev. Board. Hence the issue with the C/C++ compiler, which would be used to compile code to program this processor. In this dev board, aside from the controller there is an accelerometer, some LEDs and a microSD card to log data; in case you may not be familiar with this system.

       I was able to goto the Keil website to download their latest IDE and I am able to build code. However, there were lots of issues trying to build the example "datalogger" that comes with the evaluation board. Is it possible to have someone take a look at just being able to build the ADI "datalogger" code with the latest version of the Keil tool?

    Regards,

    Manny

Children
No Data