ADSP-21364 EZ-Kit Lite with SigmaStudio for Sharc

Hello,

I want to use the ADSP-21364 EZ-Kit Lite (Rev 2.0) with SigmaStudio but there is no USB connection, when i want to download the schematic on the board ("A USB communication failure has occured"). I use Win7 (64bit)

I work only a few days with this board and software, so it could be that i make anywhere a mistake. I choose the USBi Communication Channel in the hardware configuration, is this right? In the manual of SigmaStudio for Sharc is the connection with a adapter board explained, but the EZ-Kit have a USB port, so I connected this with the pc.

With VisualDSP++ the connection works, so why not with SigmaStudio?

Parents
  • 0
    •  Analog Employees 
    on Dec 16, 2013 12:07 AM

    Hello,

    Please refer to section 5.3.1 (Connecting EVAL-ADUSB2EBZ to Target - ADSP-21364 EZ-KIT) of SigmaStudio_for_SHARC_Users_Guide.pdf (ver 1.3, August 2013) for details on how to connect ADZS-USBI2EZB to the ADSP-21364 EZ-KIT. Connection details for other EZ-KITs are given in the subsequent sections of the document. This document is part of SigmaStudio for SHARC release 2.1.0.

    Best Regards,

    John

Reply
  • 0
    •  Analog Employees 
    on Dec 16, 2013 12:07 AM

    Hello,

    Please refer to section 5.3.1 (Connecting EVAL-ADUSB2EBZ to Target - ADSP-21364 EZ-KIT) of SigmaStudio_for_SHARC_Users_Guide.pdf (ver 1.3, August 2013) for details on how to connect ADZS-USBI2EZB to the ADSP-21364 EZ-KIT. Connection details for other EZ-KITs are given in the subsequent sections of the document. This document is part of SigmaStudio for SHARC release 2.1.0.

    Best Regards,

    John

Children
No Data