Post Go back to editing

SigmaStudio for SHARC

Hi,

As for SigmaStudio for SHARC, after the schematic was compiled and the program binary code(Hex doucment) was downloaded to the 21489 EZ-kit’s flash from address 0x00,but it does not work, I want to know what’s wrong with it ,whether I also need to  download Parameter code to flash?and anything else I need to download?

Best regards,

Taoshaofeng

Parents
  • Hi Taoshaofeng,

    Please give more details regarding the step you have followed so that I can help you debug the issue.

    Ideally, an application LDR is created using the exported files (both program and parameter). This LDR file is then written to the flash. Upon resetting the target, SHARC boots from the flash. The application along with the exported program and parameter get loaded from the flash and starts execution.

    Best Regards,

    John

Reply
  • Hi Taoshaofeng,

    Please give more details regarding the step you have followed so that I can help you debug the issue.

    Ideally, an application LDR is created using the exported files (both program and parameter). This LDR file is then written to the flash. Upon resetting the target, SHARC boots from the flash. The application along with the exported program and parameter get loaded from the flash and starts execution.

    Best Regards,

    John

Children
No Data