Post Go back to editing

Setup up the audio routing using SigmaStudio for ev21569-som+ ev-somcrr-ezkit+ADZS-AD2428MINI+EVAL-AD2428WB1BZ

Category: Software
Product Number: ev21569-som
Software Version: SigmaStudio 4.7

I have a ev21569-som+ ev-somcrr-ezkit board and it connect a ADZS-AD2428MIN over J10. In addition, the ADZS-AD2428MINI connect to a A2B EVAL-AD2428WB1BZ(this board has two microphones) over A2B bus as well. I would like to use SigmaStudio to create a audio route to allow me capture the 2PDM microphones from 21569. do you have a SigmaStudio dspprog likes adi_a2b_3NodeSampleDemoConfig.dspproj? Or if you have any guide to show me how to use SigmaStudio for ev21569-som+ ev-somcrr-ezkit board that also great.

thanks,

Kylin

Parents Reply
  • The 2 PDM mics on the EVAL-AD2428WB1BZ. This  EVAL-AD2428WB1BZ board is a a2b slave and it connect the ADZS-AD2428MINI over A2B bus. Then ADZS-AD2428MINI connect to ev-somscrr-ezkit by J10. I would like to create a route to capture the 2 mics data from 21569 by TDM inteface.  Do you have that example?

Children