KCC's Quizzes AQQ304 - A pure logic
1. Quote of the month: "I am not lazy, I'm just in energy-saving mode" - unknown
2. Quiz AQQ304 about finding a pure logic puzzle
Mike is looking at Anne, but Anne is looking at Paul.
Mike is married, but Paul is not.
Question:
Is a married
View All
August Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Important: Read the blog first . The quiz questions are all based on the content of the blog:
Stay in the loop and win! Read the blog Current Output Driving Industrial Loops , then take our quick five-question quiz for a chance to win a gift card
View All
ADSP-SC594
Recommended for New Designs
Reaching speeds of up to 1 GHz, the ADSP-SC59x processors are members of the SHARC® family of products. The ADSP-SC59x processor is a dual-SHARC+® core...
Datasheet
ADSP-SC594 on Analog.com
ADSP-SC573
Production
The ADSP-SC57x/ADSP-2157x processors are members of the SHARC® family of products. The ADSP-SC57x processor is based on the SHARC+® dual-core and the...
Datasheet
ADSP-SC573 on Analog.com
ADSP-SC598
Recommended for New Designs
Reaching speeds of up to 1 GHz, the ADSP-SC598/SC596/SC595 processors are members of the ADSP-SC59x SHARC® family of products. Containing the same dual...
Datasheet
ADSP-SC598 on Analog.com
ADSP-SC589
Production
The ADSP-SC589 processor is part of the new, high-performance, power-efficient, real-time series that delivers greater than 24 giga-floating-point operations...
Datasheet
ADSP-SC589 on Analog.com
Hi All,
I'm pleased to announce that Linux for ADSP-SC5xx Processors version 5.1.0 has been released. This is a minor update. It bumps the Linux Kernel to version 6.18.31 LTS and the Yocto build system to version 5.0.18 LTS (Scarthgap)
For further information, please refer to the Release Notes & the Getting Started Guides.
Hi,
I am not sure that it is a new issue.
But, when I type uptime command, it reported 0 load average.
And it is up for 460 days but I rebooted the system last night .
Any idea ?
e.g.
uptime
16:57:14 up 460 days 22:08, 1 user, load average: 0.00, 0.00, 0.00
Thanks
Arthur
Hi, I haven't seen that before I can check.
AChow reflashed the board with latest release, restarted and did the nfsboot and spiboot, no issue was observered.
That is strange. I am using a 598 SOM with Rev E.
Also, with a local build for this project.
Arthur
also on previous EMMC question, does it works for you now?
Yes, it works for eMMC via SPI-boot. Attached is the top command, it shows 0% CPU usage.
Any idea ?
