Sleep command in UBOOT 1.2 for SC589 EZ KIT.

Just want to confirm the following behavior:

If I type sleep 20 in U-boot, it actually 40 seconds..

ACS

  • 0
    •  Analog Employees 
    on Feb 28, 2019 5:28 AM

    Hi ,

    Sorry for the late response, Thanks for pointing this issue out, yes, it is a problem!

    We have spent time investigating this issue and found that the TIMER_CLOCK in u-boot was set to SCLK but actually the SCLK0_0 was used in our SC589 board, so just change the TIMER_CLOCK to CONFIG_SCLK_HZ/CONFIG_SCLK0_DIV in timer.c will solve your problem. And we will fix this bug in our Linux-addin 1.4.0 release.

    Thanks again for this issue!

    Best regards,

    HuanFeng