Locale Icon
English
  • Forums

    Popular Forums

    • LTspice
    • Video
    • Power Management
    • RF & Microwave
    • Precision ADCs
    • FPGA Reference Designs

    Product Forums

    • Amplifiers
    • Clocks & Timers
    • Data Converters
    • Direct Digital Synthesis (DDS)
    • Energy
    • Interface and Isolation
    • MEMS Inertial Sensors
    • Power Management
    • Processors & DSP
    • Processors & Microcontrollers
    • Switches & Multiplexers
    • Sensors
    • Voltage References
    View All

    Application Forums

    • A2B Audio Bus
    • Audio
    • Automated Test Equipment (ATE)
    • Condition-Based Monitoring
    • Depth, Perception & Ranging Technologies
    • LiDAR Solutions
    • Motor Control Hardware Platforms
    • Speech Processing Solutions
    • Video

    Design Center Forums

    • ACE Evaluation Software
    • ADEF System Platforms
    • Design Tools & Calculators
    • FPGA Reference Designs
    • Linux Software Drivers
    • Microcontroller no-OS Drivers
    • Precision Studio
    • Power Studio Designer
    • Power Studio Planner
    • Reference Designs
    • Robot Operating System (ROS) SDK
    • Signal Chain Designer
    • Software Interface Tools
  • Learn

    Highlighted Webinar

    Power Integrity for High Performance Measurement Systems

    Increasing data rates driven by AI workloads and the evolution from 5G to emerging 6G standards are placing new demands on electronic test and measurement...

    Places

    • ADI Academy
    • ADI Webinars
    • EZ Blogs
    • Video Annex
    • Virtual Classroom

    Libraries

    • 3D ToF Depth Sensing Library
    • Continuous-Wave CMOS Time of Flight (TOF) Library
    • Embedded Vision Sensing Library
    • Gigabit Multimedia Serial Link (GMSL) Library
    • Optical Sensing Library
    • Other Products Library
    • Precision Technology Signal Chains Library
    • Software Modules and SDKs Library
    • Supervisory Circuits Library
    • Wireless Sensor Networks Library
  • Community Hub

    Challenge Yourself!

      KCC Quizzes AQQ302 about Bang Gap Reference Generation

      1.Quote of the month: "People Who Say They Sleep Like a Baby usually don't have one" - unknown 2. New quiz AQQ302 about Band Gap Reference Voltage...

    View All

    What's Brewing

      Read the Blog:  Simplified I/O: One Chip, Flexible Voltage Output, Take this Quiz for Another Chance to Win a Gift Card!

      Important: Read the blog first . The quiz questions are all based on the content of the blog: Simplified I/O: One Chip, Flexible Voltage Outpu...

    View All

    Places

    • Community Help
    • Analog Dialogue Quiz
    • Logic Lounge
    • Super User Program

    Resources

    • EZ Code of Conduct
    • EZ How To Help Articles
    • Getting Started Guide
    • ADI: Words Matter
    • Community Help Videos
    View All
  • ContentZone

    Visit ContentZone

    Search content by industry or technology.
    • Blogs
    • Technical Articles
    • Tutorials
    • Videos
    • Webinars
    Your ADI content all in one place.
    View ContentZone

    The Latest Read

    SYSREF and Multi-Chip Synchronization Pitfalls

    Phased-array radars, multi-channel spectrum analyzers, and massive MIMO front-ends require that all ADCs and DACs remain phase-coherent to operate as a...

    New Release

    Using the Industrial I/O Framework for Easy Prototyping of Software Defined Radio (SDR) Transceivers
    Using the Industrial I/O Framework for Easy Prototyping of Software Defined Radio (SDR) Transceivers

    Introduction to Industrial I/O, libIIO, and Python software tools

    Recent Technical Insights

    Latest Technical Article from Analog.com
    Evaluating Power Supplies with Different Compensation Settings

    Evaluating Power Supplies with Different Compensation Settings

EngineerZone
EngineerZone
Linux Distribution for Blackfin
  • Log In
  • User
  • Site
  • Search
OR
Ask a Question
Linux Distribution for Blackfin
  • Processors & DSP
  • Software & Development Tools
  • Linux Distribution for Blackfin
  • Cancel
Linux Distribution for Blackfin
Documents [#6302] reduse U-boot time
  • Q&A
  • Docs/FAQs
  • Members
  • Tags
  • Cancel
  • +Documents
  • +2013R1 Linux release for Blackfin: FAQ
  • +2013R1: FAQ
  • +AD5700: FAQ
  • +ADI test script: FAQ
  • +bf537 SPI Bus: FAQ
  • +BF609: FAQ
  • +BF70x processor: FAQ
  • +bfin-elf-libstdc++-4.3: FAQ
  • +bfin-elf: FAQ
  • +bfin-uclinux-libstdc++-4.3: FAQ
  • +Blackfin Linux Projects: FAQ
  • +Blackinfin Linux: FAQ
  • +build toolchain: FAQ
  • +CPLB fault or SIGABRT: FAQ
  • +DAS U-BOOT FOR BLACKFIN: FAQ
  • +Default ADI release: FAQ
  • +Flash the uImage into Flash: FAQ
  • +gas test: FAQ
  • +gcc-4.3 ICEs: FAQ
  • +gcc.c-torture/execute/memset-2.c: FAQ
  • +gcc.dg/trampoline-1.c test: FAQ
  • +gcc/g++ test: FAQ
  • +gcc/g++ testcase: FAQ
  • +GDB commands: FAQ
  • +gdb.base/sigall.exp: FAQ
  • +gdb.cp/userdef.exp: FAQ
  • +gdb.gdbtk/c_variable.exp: FAQ
  • +GDB: FAQ
  • +gdb: symbol: FAQ
  • +gdbproxy: FAQ
  • +GNU TOOLCHAIN: FAQ
  • +How to load Linux: FAQ
  • +ldr-utils: FAQ
  • +libstdc++-4.3 21_strings/basic_string/capacity/char/18654.cc test: FAQ
  • +LOOP: FAQ
  • +mcpu: FAQ
  • -Parent Document for U-Boot Bug Archive: FAQ
    • [#5797] usb fails to work in latest u-boot 2009.11
    • [#6262] Default SPI flash device NO. is wrong in u-boot trunk for bf518-ezbrd
    • [#6285] MMC/SD can't work on bf537-stamp when either icache or dcache is off
    • [#6286] characters is not shown correctly in u-boot jtag console test
    • [#6302] reduse U-boot time
    • [#6303] reduse U-boot time
    • [#6804] 561 u-boot fails to run save after update now
    • [#6693] u-boot tools build fail
    • [#6809] build uboot tools fails when running toolchain buildscript now
    • [#7733] fatls show two lines of the same file
  • +Parent Document for U-Boot Bug Forum Archive: FAQ
  • +Parent for all content moved from GNU Archive: FAQ
  • +prepare_target_solibs: FAQ
  • +SDP-B: FAQ
  • +signal 11: FAQ
  • +sim binutils: FAQ
  • +SPI eeprom: FAQ
  • +svn head u-boot build: FAQ
  • +test libmudflap: FAQ
  • +toolchain-regtest -r: FAQ
  • +toolchain-regtest: FAQ
  • +trunk head gdbproxy: FAQ
  • +trunk toolchain: FAQ
  • +u-boot with UART: FAQ
  • +u-boot: FAQ
  • +uClinux kernel: FAQ
  • +uClinux: FAQ
  • +Upgrade from 3801 to 3852: FAQ
  • +VDSP: FAQ

[#6302] reduse U-boot time

[#6302] reduse U-boot time

Submitted By: Amit Garg

Open Date

2010-10-18 01:37:47     Close Date

2010-10-18 02:07:57

Priority:

High     Assignee:

Nobody

Category:

N/A     Fixed In Release:

N/A

Found In Release:

2009R1     Status:

Closed

Board:

N/A     Processor:

BF516

Silicon Revision:

    Resolution:

Rejected

Is the bug repeatable?:

N/A     

Summary: reduse U-boot time

Details:

Hi,

  I am using U-boot 1.3.3

Board :- Phytec 3250

ARM9

Linux 2.6.27.8

I want to reduce U-bbot time

now this is taking 17 second before uncompressing kernel

i am share time stamp

19:55.7    2010]    Phytec LPC3250 board

19:55.7    2010]    Build date: Jan 12 2010 15:27:22

19:55.8    2010]    Autoboot in progress, press any key to stop

19:57.8    2010]   

19:57.8    2010]   

19:57.8    2010]    U-Boot 1.3.3 (Apr 10 2009 - 09:21:30)

19:57.8    2010]   

19:57.8    2010]    DRAM:  128 MB

19:57.9    2010]    NAND:  64 MiB

20:02.1    2010]    In:    serial

20:02.1    2010]    Out:   serial

20:02.1    2010]    Err:   serial

20:02.1    2010]    Hit any key to stop autoboot:  0

20:02.1    2010]   

20:02.1    2010]    Loading from NAND 64MiB 3,3V 8-bit, offset 0x190000

20:02.1    2010]    Image Name:   Linux-2.6.27.8

20:02.1    2010]    Image Type:   ARM Linux Kernel Image (uncompressed)

20:02.1    2010]    Data Size:    1668168 Bytes =  1.6 MB

20:02.1    2010]    Load Address: 80008000

20:02.1    2010]    Entry Point:  80008000

20:09.0    2010]    ## Booting kernel from Legacy Image at 80100000 ...

20:09.0    2010]    Image Name:   Linux-2.6.27.8

20:09.0    2010]    Image Type:   ARM Linux Kernel Image (uncompressed)

20:09.0    2010]    Data Size:    1668168 Bytes =  1.6 MB

20:09.1    2010]    Load Address: 80008000

20:09.1    2010]    Entry Point:  80008000

20:09.1    2010]    Loading Kernel Image ... OK

20:10.0    2010]    OK

20:10.0    2010]   

20:10.0    2010]    Starting kernel ...

20:10.1    2010]   

Please help me i am noob in u-boot

Follow-ups

--- Mike Frysinger                                           2010-10-18 02:07:57

this is a website for ADI parts.  you are not using an ADI part, so please seek

assistance elsewhere.

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

File Name     File Type     File Size     Posted By

No Files Were Found

  • Share
  • History
  • More
  • Cancel
analog-devices logo

About Analog Devices

  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
  • Instagram page
  • Twitter page
  • Linkedin page
  • Youtube page
  • Facebook
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2026 Analog Devices, Inc. All Rights Reserved

analog-devices

About Analog Devices

Down Up
  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

Down Up
  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
Instagram page Facebook Twitter page Linkedin page Youtube page
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2026 Analog Devices, Inc. All Rights Reserved