2010-07-07 21:34:44 IP08 uClinux2008.mk can not work
nike tian (CHINA)
Message: 91015
For I am using CPU Frequency Scaling,I compiled uClinux2008.mk,when done,download the file uImage_r3beta.ip08
to my BF533 board(IP04/IP08),but network and fxo cards init fail!here is the debug messgae:
ip08>set autostart
ip08>tftp 0x1000000 uImage_r3beta.ip08
dm9000 i/o: 0x20100000, id: 0x90000a46
MAC: 02:80:ad:20:31:b8
operating at 10M half duplex mode
Using DM9000#0 device
TFTP from server 192.168.18.95; our IP address is 192.168.18.253
Filename 'uImage_r3beta-back.ip08'.
Load address: 0x1000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################################
done
Bytes transferred = 2490368 (260000 hex)
ip08>bootm 0x1000000
## Booting image at 01000000 ...
Image Name: uClinux Kernel and ext2
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 2484784 Bytes = 2.4 MB
Load Address: 00001000
Entry Point: 001a0000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 1a0000
Linux version 2.6.22.18-ADI-2008R1-svn (root@localhost.localdomain) (gcc version 4.1.2 (ADI svn)) #3 Thu Jul 1 18:29:42 CST 2010
Hardware Trace Active and Enabled
Blackfin support (C) 2004-2007 Analog Devices, Inc.
Compiled for ADSP-BF533 Rev 0.5
Warning: Compiled for Rev 5, but running on Rev 6
Blackfin Linux support by blackfin.uclinux.org/
Processor Speed: 400 MHz core clock and 133 MHz System Clock
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
text = 0x00001000-0x00135dd0
rodata = 0x00136000-0x0018acf4
data = 0x0018b000-0x001a0000
stack = 0x0018c000-0x0018e000
init = 0x001a0000-0x001b5000
bss = 0x001b5000-0x001c499c
available = 0x001c499c-0x03b00000
rootfs = 0x03b00000-0x03f00000
DMA Zone = 0x03f00000-0x04000000
Instruction Cache Enabled
Data Cache Enabled (write-back)
Built 1 zonelists. Total pages: 14986
Kernel command line: ethaddr=00:11:22:33:11:22 root=/dev/mtdblock2 rw
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 58028k/65536k RAM, (84k init code, 1235k kernel code, 487k data, 1024k dma, 584k reserved)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin Data A SRAM: 16 KB (16 KB free)
Blackfin Data B SRAM: 16 KB (16 KB free)
Blackfin Instruction SRAM: 64 KB (55 KB free)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
stamp_init(): registering device resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
yaffs Jul 1 2010 17:36:30 Installing.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
dm9000 Ethernet Driver
uclinux[mtd]: RAM probe address=0x3b00000 size=0x400000
Creating 1 MTD partitions on "RAM":
0x00000000-0x00400000 : "ROMfs"
Generic platform RAM MTD, (c) 2004 Simtec Electronics
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 755 at 0x05e60000
Bad eraseblock 1236 at 0x09a80000
Creating 2 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00800000 : "linux kernel"
0x00800000-0x10000000 : "file system"
bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Contoller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
usbmon: debugfs is not available
driver isp1362-hcd, 2005-04-04
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting the system clock to 1986-10-27 04:25:00 (530771100)
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: auto selecting yaffs2
block 692 is bad
block 1173 is bad
VFS: Mounted root (yaffs filesystem).
Freeing unused kernel memory: 84k freed
dma_alloc_init: dma_page @ 0x001b2000 - 256 pages at 0x03f00000
+[ ! -f /etc/sysconfig/network ]
+GATEWAY=192.168.18.3
+HOSTNAME=eepbx
+NETWORKING=yes
+[ yes != yes ]
+DEVICE=
+IPADDR=
+NETMASK=
+ONBOOT=
+[ -f /etc/sysconfig/network-scripts/ifcfg-eth0 ]
+BOOTPROTO=static
+DEVICE=eth0
+IPADDR=192.168.18.252
+NETMASK=255.255.255.0
+ONBOOT=yes
+[ yes = yes ]
+[ static = static ]
+/bin/ifconfig eth0 192.168.18.252 netmask 255.255.255.0
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
SIOCSIFNETMASK: No such device
+DEVICE=
+IPADDR=
+NETMASK=
+ONBOOT=
+[ -f /etc/sysconfig/network-scripts/ifcfg-eth1 ]
+BOOTPROTO=static
+DEVICE=eth1
+IPADDR=192.168.18.252
+NETMASK=255.255.255.0
+ONBOOT=yes
+[ yes = yes ]
+[ static = static ]
+/bin/ifconfig eth1 192.168.18.252 netmask 255.255.255.0
SIOCSIFADDR: No such device
eth1: unknown interface: No such device
SIOCSIFNETMASK: No such device
eth0: error fetching interface information: Device not found
+[ != ]
+/bin/ifconfig eth0 169.254.21.1
SIOCSIFADDR: No such device
eth0: unknown interface: No such device
+[ 192.168.18.3 != ]
+route add default gw 192.168.18.3
SIOCADDRT: Network is unreachable
+ONBOOT=
+USER=
+DEVICE=
+[ ! -f /etc/sysconfig/network-scripts/ifcfg-ppp0 ]
+DEVICE=eth1
+ONBOOT=no
+USER=epbx
+[ no != yes ]
+exit 0
Looking for host pool.ntp.org and service ntp
Error : Name or service not known
27 Oct 04:25:03 ntpdate[77]: can't find host pool.ntp.org
27 Oct 04:25:03 ntpdate[77]: no servers can be used, exiting
Mon Oct 27 04:25:03 UTC 1986
modprobe: cannot parse modules.dep
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
Welcome to:
____ _ _
/ __| ||_| _ _
_ _| | | | _ ____ _ _ \ \/ /
| | | | | | || | _ \| | | | \ /
| |_| | |__| || | | | | |_| | / \
| ___\____|_||_|_| |_|\____|/_/\_\
|_| IP04/IP08 Open Hardware IP-PBX
Blackfin Asterisk Build System (BAPS) Edition
For further information see:
www.rowetel.com/ucasterisk/ip04.html
www.rowetel.com/ucasterisk/baps.html
Thanks to the BAPS, Astfin, BlackfinOne, and Asterisk communities;
Analog Devices and Atcom.
BusyBox v1.4.1 (2010-06-18 18:22:14 CST) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:~>
root:~>
root:~>
root:~> ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
QuoteReplyEditDelete
2010-07-07 21:42:38 Re: IP08 uClinux2008.mk can not work
Mike Frysinger (UNITED STATES)
Message: 91017
we dont maintain the source tree you're using. please post your question to the asterisk forums instead:
blackfin.uclinux.org/gf/project/asterisk/forum/
QuoteReplyEditDelete
2010-07-07 21:56:26 Re: IP08 uClinux2008.mk can not work
nike tian (CHINA)
Message: 91019
Thank you Mike!
I has posted my question to asterisk forums,but no body answed me!
QuoteReplyEditDelete
2010-07-07 22:05:03 Re: IP08 uClinux2008.mk can not work
Mike Frysinger (UNITED STATES)
Message: 91020
you're asking us about code we havent written and dont maintain, so ...