2010-09-14 19:44:47 missing /dev/input
Rob Maris (GERMANY)
Message: 93438
I'm missing /dev/input. I have activated gpio-keys and event interface. I checked also the troubleshooting section of
docs.blackfin.uclinux.org/doku.php?id=uclinux-dist:dev-management&s[]=static&s[]=device
It is even not present when I select static device configuration (while mdev active, so dynamic generation using evice_table.txt. I don't know where to look now. I cannot use event_test to check events now.
QuoteReplyEditDelete
2010-09-14 20:20:27 Re: missing /dev/input
Rob Maris (GERMANY)
Message: 93439
When I restore gpio-keys to be loaded on boot time, the event device is present (/dev/event0). Do I need hotplugging feature when gpio-keys build as module?
QuoteReplyEditDelete
2010-09-14 20:59:34 Re: missing /dev/input
Mike Frysinger (UNITED STATES)
Message: 93440
if you dont have hotplugging enabled, then devices will not be created on the fly. it'll be up to you to take care of it.