2008-02-13 06:06:53 Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Herbert Weinfurter (AUSTRIA)
Message: 50977
Kernelversion 2007R1.1 RC3
if I connect the board to the sport the development-boear doesn't startup!!
I tried to integrate the driver for 1981b once in kernel/ once as module --> no difference
currently there is no auto-reset at the u-boot startup
the uboot basically works perfect .......... do I have to consider anything at the uboot usage?
QuoteReplyEditDelete
2008-02-14 02:07:06 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Yi Li (CHINA)
Message: 51024 Could you please post the boot log?
QuoteReplyEditDelete
2008-02-14 09:00:29 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Herbert Weinfurter (AUSTRIA)
Message: 51049
until now I used the precompiled image of uboot.
there are no message written.
are there any possibilities to enable advanced logging options in UBOOT?
QuoteReplyEditDelete
2008-02-14 09:19:23 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Robin Getz (UNITED STATES)
Message: 51052 Herbert:
I think Yi is asking for when you say it fails - how does it fail? What prints out on the screen?
Thanks
-Robin
QuoteReplyEditDelete
2008-02-14 10:07:22 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Herbert Weinfurter (AUSTRIA)
Message: 51054 Following Output:
Excå
U-Boot 1.1.6-svn737 (ADI-2007R1) (Apr 4 2007 - 11:24:34)
CPU: ADSP BF533 Rev.: 0.3
Board: ADI BF533 Stamp board
Support: http://blackfin.uclinux.org/
Clock: VCO: 398 MHz, Core: 398 MHz, System: 79 MHz
SDRAM: 128 MB
FLASH: 4 MB
QuoteReplyEditDelete
2008-02-14 14:03:34 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Mike Frysinger (UNITED STATES)
Message: 51065 there are 2008R1 pre-release images you can test ... please grab the bf533 stamp one
QuoteReplyEditDelete
2008-02-15 03:11:15 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Herbert Weinfurter (AUSTRIA)
Message: 51081
is this release compatible with 2007R1.1 kernel?
I'll try the
Nightly Snapshots snaps 3 - Alpha u-boot-trunk-svn.src.tar.bz2
OK?, If not, give me the correct link
QuoteReplyEditDelete
2008-02-15 03:31:42 Re: Problem AD1981B on BF533-STAMP ... UBoot stops at startup
Mike Frysinger (UNITED STATES)
Message: 51083 generally speaking, u-boot and the kernel versions do not matter so long as u-boot is newer than the kernel