2008-04-23 02:07:53 Device 0:a: Target halted due to software breakpoint but no breakpoint found at address: 0
Bing Han (CHINA)
Message: 54753
Hi,
I am running a H.263 code on BF561.
As it is running,it breaks with the message: Device 0:a: Target halted due to software breakpint but no breakpoint found at address : 0x00105d08.
And the SEQSTAT=00002023,EXCAUSE=23,RETX=FFA0175E. I check the blackfin memory,one function "CodeOneOrTwo"begins at 0xffa0175a.
It seems that I access memory protected or not accessible.
I have tried to change my code,sometime it works.
I do not enanle the cache.Why it happens?
TranslateQuoteReplyEditDelete
2008-04-23 02:32:28 Re: Device 0:a: Target halted due to software breakpoint but no breakpoint found at address: 0
Mike Frysinger (UNITED STATES)
Message: 54754 are you running Linux ?
QuoteReplyEditDelete
2008-04-23 04:02:46 Re: Device 0:a: Target halted due to software breakpoint but no breakpoint found at address: 0
Bing Han (CHINA)
Message: 54757
No,I just use visualdsp++4.0.
I wonder why it happens. Sometimes I modify the function(such as change pointer to static array) from which the procedure breaks,the procedure can run then. And the procedure will breaks at another function later.
Thanks.
TranslateQuoteReplyEditDelete
2008-04-23 04:16:26 Re: Device 0:a: Target halted due to software breakpoint but no breakpoint found a
Yi Li (CHINA)
Message: 54760 VDSP is not supported by this website.
QuoteReplyEditDelete
2008-04-23 05:10:46 Re: Device 0:a: Target halted due to software breakpoint but no breakpoint found at address: 0
Mike Frysinger (UNITED STATES)
Message: 54776 like Yi said, this is a Linux/open source website. we dont know VDSP, we dont use VDSP, we cant help or care about VDSP. contact your local FAE for assitance.