2008-06-26 02:52:25 build AD1836 driver on uClinux-dist-2007R1.1-RC3.tar.bz errot
hong li (CHINA)
Message: 57882
Hi everyone
I can build the kernel used default configuration. But when I open the compile switch of AD1836 according to the document http://docs.blackfin.uclinux.org/doku.php?id=ad1836a_setup
happen errors as follow:
Building modules, stage 2.
MODPOST 21 modules
WARNING: "bfin_write" [sound/blackfin/snd-ad1836.ko] undefined!
make[2]: *** [__modpost] error 1
make[1]: *** [modules] error 2
make[1]: Leaving directory `/usr/src/uClinux-dist/linux-2.6.x'
make: *** [linux] error 1
hardware : ezkit 533
software: uClinux-dist-2007R1.1-RC3.tar.bz
how to solve this problem ?
Thanks
Hong
QuoteReplyEditDelete
2008-06-26 03:09:09 Re: build AD1836 driver on uClinux-dist-2007R1.1-RC3.tar.bz errot
Mike Frysinger (UNITED STATES)
Message: 57885
this was fixed a while ago. update to 2008R1.
QuoteReplyEditDelete
2008-06-26 03:14:38 Re: build AD1836 driver on uClinux-dist-2007R1.1-RC3.tar.bz errot
hong li (CHINA)
Message: 57886
Mike
Thanks your help
Hong