2008-07-09 20:50:24 Host loose control after the kernel booting in EZKIT
Bo Zhuang (CANADA)
Message: 58573
Hi. After I download the kernel uImage (uImage file under Images folder) to the BF548EZKIT board and used the bootm command, the linux boot normally as shown in the screen of the EZKIT. But I loose control of my kermit window in my host machine. Is there a way to get back the control in my host machine?
Thanks.
QuoteReplyEditDelete
2008-07-09 21:52:23 Re: Host loose control after the kernel booting in EZKIT
Robin Getz (UNITED STATES)
Message: 58577
Bo:
What are your U-Boot "bootargs" set to?
you should have a "console=ttyBF0,57600" in there somewhere, otherwise it will not use the UART as a console.
-Robin