2008-07-10 04:36:12 skyeye
heni hbaieb (TUNISIA)
Message: 58604
About emulation skyeye
I have downloaded version skyeye-testsuite-1.2.5
I tried to start the test "skyeye-testsuite-1.2.5/uClinux/bf533"
but when I launch a test for architecture blakfin I get an error in memory addressing itself as a kernel panic case
ok here is the message display:
skyeye-testsuite-1.2.5/uClinux/bf533$ skyeye -e linux
Your elf file is little endian.
arch: blackfin
mach info: name bf533, mach_init addr 0x80bb5e2
uart_mod:0, desc_in:, desc_out:, converter:
start addr is set to 0x00001000 by exec file.
▒Linux version 2.6.12.1-BFIN-2005R4-ksh (ksh@ksh) (gcc version 3.4.4 (Blackfin 05R4 20051205)) #15 Sun Feb 4 20:14:15 EST 2007
Blackfin support (C) 2004 Analog Devices, Inc.
ADSP-BF533 Rev. 0.0
Warning: Unsupported Chip Revision ADSP-BF533 Rev. 0.0 detected
uClinux/BF533
Blackfin uClinux support by blackfin.uclinux.org
Processor Speed: 110 MHz core clock and 22 Mhz System Clock
Board Memory: 128MB
Memory map:
text = 0x001000-0x08219c
data = 0x08cf14-0x0a50bc
bss = 0x0a50c0-0x0aff04
rootfs = 0x7f00000-0x7f00000
stack = 0x08e000-0x090000
Hardware Trace Enabled
Built 1 zonelists
Kernel command line:
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 512 (order: 9, 8192 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Physical pages: 7f00
Memory available: 128128k/130508k RAM, (39k init code, 516k kernel code, 139k data, 1024k dma)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin DATA_A SRAM: 32 KB
Blackfin DATA_B SRAM: 32 KB
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
Linux NoNET1.0 for Linux 2.6
Blackfin DMA Controller for BF533
stamp_init(): registering device resources
BlackFin BF533 serial driver version 2.00 With DMA Support
io scheduler noop registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
uclinux[mtd]: RAM probe address=0x7f00000 size=0x0
Creating 1 MTD partitions on "RAM":
0x00000000-0x00000000 : "EXT2fs"
mtd: partition "EXT2fs" is out of reach -- disabled
uclinux[mtd0]: set EXT2fs to be root filesystem
end_request: I/O error, dev mtdblock0, sector 2
EXT2-fs: unable to read superblock
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,0)
TranslateQuoteReplyEditDelete
2008-07-11 04:04:52 Re: skyeye
Yi Li (CHINA)
Message: 58663
We did not test/update skyeye on blackfin for a long time.