2008-08-19 09:28:43 ppi driver

Pranay Upadhyay (INDIA)

Message: 60642

Hello sir,

I have installed the uClinux-dist-2008R1-RC8 and toolchain of 2008.I am using the BF 561 Ez-kit for video in from source(VCR or camera) and monitor for display the video.Can you suggest me that from which driver or any other techinique to test the video in -out from the BF 561 Ez-kit.

-Regards

Pranay

QuoteReplyEditDelete

2008-08-19 11:48:15 Re: ppi driver

Robin Getz (UNITED STATES)

Message: 60659

Pranay:

We have no examples which using the video in/out encoders/decoders which are found on the BF561 EZKits.

So, the answer is - there are no suggestions.

-Robin

QuoteReplyEditDelete

2008-08-19 23:06:14 Re: ppi driver

Pranay Upadhyay (INDIA)

Message: 60701

Hello Robin sir,

Ok, I have written the ppi0 driver for video in and ppi1 driver for video out for BF 561 that one is working properly separately.can you tell me some example code for opening the both device at a time and read write respectively from the driver.

-Regards

Pranay

QuoteReplyEditDelete

2008-08-20 06:47:56 Re: ppi driver

Pranay Upadhyay (INDIA)

Message: 60748

hello sir,

I have tested the ppi0 and ppi1 driver which is running on 2007 dist, but when I am trying to do from 2008 dist then giving error that driver can not open.I have added the driver in the vendor.

-Regards

pranay

QuoteReplyEditDelete

2008-08-20 10:43:16 Re: ppi driver

Robin Getz (UNITED STATES)

Message: 60762

Pranay:

use vlc or ffmpeg.

-Robin

QuoteReplyEditDelete

2008-08-22 05:06:02 Re: ppi driver

Pranay Upadhyay (INDIA)