2008-11-30 23:50:46 ov9665 driver on SVR1

you hello (CHINA)

Message: 66051

it looks that there is a ov9665 camara on SVR1,i want to known can it works well. on my board the ov9665 camara's frame rate be less than 10 frames/sec and there are a lot of noise points.i want to refer the configuration set of ov9665 on SVR1 but i can not find that in blackfin kernel.could someone tell me how to configure ov9665 camara .

TranslateQuoteReplyEditDelete

2008-12-01 00:20:31 Re: ov9665 driver on SVR1

Mike Frysinger (UNITED STATES)

Message: 66053

if you have questions about the surveyor board, then you should ask on the surveyor site

http://www.surveyorcorp.com/

QuoteReplyEditDelete

2008-12-01 04:05:05 Re: ov9665 driver on SVR1

Michael Hennerich (GERMANY)

Message: 66061

uclinux-dist-trunk/linux-2.6.x/drivers/media/video/Blackfin/ov9655.c

-Michael

QuoteReplyEditDelete

2008-12-01 05:11:14 Re: ov9665 driver on SVR1

you hello (CHINA)

Message: 66071

hi Michael:

why i can not find ov9655's configuration set in your driver,threre is only reg 0x11 in my_config and could you tell me how the other reg have to be configured.

TranslateQuoteReplyEditDelete

2008-12-01 05:38:00 Re: ov9665 driver on SVR1

Michael Hennerich (GERMANY)

Message: 66072

I'm not the author of this sensor driver and I don't have the datasheet or hardware for this sensor.

Please contact the author Martin Strubel.

-Michael

QuoteReplyEditDelete

2010-01-20 10:05:56 Re: ov9665 driver on SVR1

Colin Buckley (UNITED KINGDOM)

Message: 84855

Hi,