2009-01-06 04:04:09 Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Cuong Tran (VIET NAM)
Message: 67435
I have a EXT-BF5XX-USB board from BlueTechnix with USB peripheral controller Net2272 chip on it. The document from BlueTechnix said that I can use the driver for BF537U which come along with current uCLinux version. I took the uClinux-dist-2008R1.5-RC3 and modified the BF537U-Net2272 USB driver for using with my CM-BF561 V2.0 (just modified address, IRQ pin and Reset pin). But it doesn't seem to work. Can anyone help?
I attach 2 modified files.
net2272.c
cm_bf561.c
QuoteReplyEditDelete
2009-01-06 04:25:48 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Mike Frysinger (UNITED STATES)
Message: 67458
you should contact the bluetechnix guys with questions about the usb addon card ... we dont use/test/have one.
QuoteReplyEditDelete
2009-01-06 05:57:51 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Cuong Tran (VIET NAM)
Message: 67465
Thank you. I'm trying to contact them. But I just want to ask if someone already succesful and may give me some advices.
QuoteReplyEditDelete
2009-01-06 12:04:41 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Tom Whiteley (UNITED KINGDOM)
Message: 67484
I believe Bluetechnix have a working version of USB using CM-BF561: http://blackfin.uclinux.org/gf/project/bluetechnix/frs/ it may help to look at that.
QuoteReplyEditDelete
2009-01-06 21:07:24 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Cuong Tran (VIET NAM)
Message: 67498
Thank you for help. I've looked over there, but that's the driver for host USB and using with DEV-BF5XX board. I want a driver for USB peripheral using with EVAL-BF5XX.
I found a driver for BF561 using with EZKIT and it's only differrent with mine at the point that EZKIT using PF10 & PF11 of BF561, EVAL-BF5XX using PF45 & PF46, and the address too.
I also found that CM-BF537 of BlueTechnix has to be set PH15 low to make AMS2 work properly, BF533 has to be set PF0 low and PF1 high to make AMS3 work properly. I wonder if BF561 has to be done something to use AMS2 or AMS3 properly? Anyone have idea?
QuoteReplyEditDelete
2010-03-31 00:28:13 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Vikram Chowdhari (INDIA)
Message: 87882
Hey Cuong:
I am looking for BF561 USB host. I will be greatful if you can send me the code for that. I hope it works on VDK. send me at vikramc@tcot.iitm.ac.in
Thanks Vikram
QuoteReplyEditDelete
2010-03-31 00:37:37 Re: Can't use EXT-BF5XX-USB board with CM-BF561 from BlueTechnix
Mike Frysinger (UNITED STATES)
Message: 87883
you've been told many times to seek VDK help elsewhere. this is the last time.
you cant take USB stacks from Linux and use them under VDK without licensing issues. consult a lawyer.