2009-02-13 07:45:25 Alsa driver for SSM2602 with BF53x
Laurent Brard (FRANCE)
Message: 69413
Hi,
I am considering interconnecting a BF536 with an SSM2602.
I have seen in the 2008R1.5 release that the SSM2602 seems only supported as a System On Chip device in the BF52xC.
Still it looks like there are an I2C address and a SPORT between the blackfin and the codec.
So I am wondering if I could set up a BF536 with an external SS2602 and still have the driver work almost as is.
Thank you in advance,
Laurent
QuoteReplyEditDelete
2009-02-13 07:54:48 Re: Alsa driver for SSM2602 with BF53x
Robin Getz (UNITED STATES)
Message: 69416
Laurent:
The SSM2602 inside the BF52x is just two die in the same package - you still connect the pins of the SPORT and the codec externally.
It should work without issue on the 536 - if it doesn't it is our fault, and we will fix it.
-Robin
QuoteReplyEditDelete
2009-02-13 07:55:43 Re: Alsa driver for SSM2602 with BF53x
Michael Hennerich (GERMANY)
Message: 69417
The driver works 100% as is.
It doesn't matter if the SSM2602 is internal or external.
-Michael