2009-06-05 10:06:40 sh: can't execute ...
Nikolay Chokoev (IRELAND)
Message: 75250
Hi,
I've the errors while running on BF527 EZKIT.... What I'm doing wrong here?
Linux version 2.6.28.10-ADI-2010R1-pre-svn6580 (root@dlnx764) (gcc version 4.1.2
(ADI svn)) #81 Fri Jun 5 14:17:56 IST 2009
console [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x001458e0
rodata = 0x001458e0-0x001af7a4
bss = 0x001b0000-0x001c547c
data = 0x001c547c-0x001de000
stack = 0x001dc000-0x001de000
init = 0x001de000-0x01812000
available = 0x01812000-0x03eff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Boot Mode: 1
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF527 Rev 0.1
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 525 MHz core clock and 131 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16001
Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial
,uart1,57600 console=tty0 console=ttyBF0,57600 ip=192.168.0.15:192.168.0.2:192.1
68.0.1:255.255.255.0:bf527-ezkit:eth0:off
Configuring Blackfin Priority Driven Interrupts
<...snip...>
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 02:29:46 UTC (8986)
IP-Config: Complete:
device=eth0, addr=192.168.0.15, mask=255.255.255.0, gw=192.168.0.1,
host=bf527-ezkit, domain=, nis-domain=(none),
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
Freeing unused kernel memory: 22736k freed
sh: can't execute 'hostname': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute '/bin/mdev': Bad address
sh: can't execute 'ln': No such file or directory
sh: can't execute 'ln': No such file or directory
sh: can't execute 'ln': No such file or directory
sh: can't execute 'ln': No such file or directory
sh: can't execute 'mkdir': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute 'mkdir': No such file or directory
sh: can't execute 'mount': No such file or directory
sh: can't execute 'grep': No such file or directory
sh: can't open '/proc/sys/vm/min_free_kbytes': No such file or directory
sh: can't open '/proc/sys/vm/vfs_cache_pressure': No such file or directory
sh: can't execute 'ifconfig': No such file or directory
sh: can't execute 'cat': No such file or directory
BusyBox v1.14.1 (2009-06-05 14:16:33 IST) hush - the humble shell
<...snip...>
QuoteReplyEditDelete
2009-06-05 10:13:44 sh: can't execute ...
Michael Hennerich (GERMANY)
Message: 75252 Update your tree again - this issue was fixed yesterday/today.
-Michael