2009-11-23 16:26:13 bf527 ez-kit and av ez-extender
Steve ten Pas (UNITED STATES)
Message: 82668
Where can I get information on the proper jumper settings on the av ez-extender board when using it with the bf527 ez-kit? I also need to know how to setup uClinux for using these two boards together.
Thanks,
Steve
QuoteReplyEditDelete
2009-11-23 16:32:46 Re: bf527 ez-kit and av ez-extender
Mike Frysinger (UNITED STATES)
Message: 82669
the AV-EZ-Extender card is not currently supported with Linux drivers. you might be able to find some drivers by searching the forums and seeing what other people have posted.
if you want to know how to hook it up to different boards, review the manuals on analog.com. or post questions to the dsp board at ez.analog.com/
QuoteReplyEditDelete
2009-11-24 11:16:50 Re: bf527 ez-kit and av ez-extender
Robin Getz (UNITED STATES)
Message: 82706
Mike:
I thought that the AD1836 should be supported with the existing driver - shouldn't it? It is just the video parts (ADV7179 & ADV7183B) that have no drivers (that I'm aware of).
-Robin
QuoteReplyEditDelete
2009-11-24 11:59:26 Re: bf527 ez-kit and av ez-extender
Mike Frysinger (UNITED STATES)
Message: 82712
i was referring to the video parts as that is why people get this card in the first place. the bf527-ezkit already has audio on it.