2009-09-09 03:54:25 How to find out what is compiled
Rainer Zufall (GERMANY)
Message: 79698
Hi.
I was reading this site:
docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:env
It says:
[quote][/quote]
Enable u-boot tools in the uClinux-dist user space configuration:
Blackfin app programs --->
[*] U-Boot Tools
I think this refers to compiling. First: Is this correct?
I'am using a pre compiled image uImage_BF533-EZKIT.
Is it possible to find out what is compiled in the image while it is running?
TranslateQuoteReplyEditDelete
2009-09-09 04:02:48 Re: How to find out what is compiled
Mike Frysinger (UNITED STATES)
Message: 79699
the config files in the releases are included in the image itself. simply look in /root/.
QuoteReplyEditDelete
2009-09-09 06:40:59 Re: How to find out what is compiled
Rainer Zufall (GERMANY)
Message: 79704
Thank you for your answer.
Are these configs 'pre compile configs' which has to bee chosen before compiling?
For what do I have to look in the file? I didn't found what I was looking for
root:~> cat uclinux-config | grep Boot
root:~> cat uclinux-config | grep Tools
# Flash Tools
TranslateQuoteReplyEditDelete
2009-09-09 06:44:56 Re: How to find out what is compiled
Mike Frysinger (UNITED STATES)
Message: 79705
i dont know what you mean by "pre compile configs". these are the config files used to build the image.
read the help in the menuconfig to figure out what option you want.
QuoteReplyEditDelete
2009-09-09 10:07:57 Re: How to find out what is compiled
Rainer Zufall (GERMANY)
Message: 79709
> i dont know what you mean by "pre compile configs". these are the config files used to build the image.
This is exactly what I ment :-)
Thank you very much.
---
TranslateQuoteReplyEditDelete
2009-09-09 16:32:57 Re: How to find out what is compiled
Peter Gombos (HUNGARY)
Message: 79715
Hi,
I've just enabled U-Boot tools and it works fine. The only thing you need to create a config file manually and you can use fw_printenv / fw_setenv commands.
I wish everything were as easy in uClinux as this...