2008-10-21 10:44:20 Problems with BlueTechnix CM-BF537E
Patrick Hotz (GERMANY)
Message: 63992
Please Help me,
i have big problems with my CM-BF537E on a FireCracker Board...
at the moment there is the BlueSheep bootloader installed
I connect to the board using the minicom terminal software under Debian.
I have connection to the board.
but i can not send the u-boot .hex file to the CM-BF537E...
i have read the FAQ from BlueTechnix but it doesent work..
(http://bluetechnix.at/rainbow2006/site/support/faq/350/faq.aspx)
i start the transfer with "xmr u-boot.hex" ==> that is OK
then i start the file transfer using xmodem config ==> the CM-BF537E Module hangs up and do nothing until i press the reset button...
is there anyone who can help me?
TranslateQuoteReplyEditDelete
2008-10-21 13:51:52 Re: Problems with BlueTechnix CM-BF537E
Mike Frysinger (UNITED STATES)
Message: 63997
we dont use/know/support the Blue/Black Sheep bootloaders. you'll have to contact the BlueTechnix guys for assistance.
QuoteReplyEditDelete
2008-10-21 15:45:36 Re: Problems with BlueTechnix CM-BF537E
Robin Getz (UNITED STATES)
Message: 64001
Patrick:
We don't support the Firecracker board either. As Mike said - ask your place of purchase for support.
-Robin