2008-04-28 09:28:44     bf52x vs bf537

2008-04-28 09:28:44     bf52x vs bf537

Vitja Makarov (RUSSIAN FEDERATION)

Message: 55133    Hi!

It seems that bf52x series are pin-compatible with 537 with little pinout changes?

Is it really so? What's there with USB does it work ok?

vitja.

QuoteReplyEditDelete

2008-04-28 10:54:51     Re: bf52x vs bf537

Robin Getz (UNITED STATES)

Message: 55143    Vitja:

>It seems that bf52x series are pin-compatible with 537 with little pinout changes?

No they are not. look at the datasheets.

-robin

QuoteReplyEditDelete

2008-04-28 11:18:16     Re: bf52x vs bf537

Frans Klaver (NETHERLANDS)

Message: 55151    > What's there with USB does it work ok?

USB works ok with 2008R1.

Frans

QuoteReplyEditDelete

2008-04-28 12:02:59     Re: bf52x vs bf537

Robin Getz (UNITED STATES)

Message: 55158    Frans:

USB on BF527 may work for you - it might fail. There are chip bugs we don't have fixes for in the kernel.

You should not use BF527 0.1 or 0.0 in a production system, and we know it will eventually have an issue.

-Robin

QuoteReplyEditDelete

2008-04-29 03:30:24     Re: bf52x vs bf537

Frans Klaver (NETHERLANDS)

Message: 55193    True that.

QuoteReplyEditDelete

2008-04-29 04:57:13     Re: bf52x vs bf537

Vitja Makarov (RUSSIAN FEDERATION)

Message: 55208    Thanks for info.

It seems that it's to early to relay on bf52x-series...

That's poor.

QuoteReplyEditDelete

2008-04-29 11:51:44     Re: bf52x vs bf537

Robin Getz (UNITED STATES)

Message: 55239    Vitjia:

Contact your local ADI person to get an updated schedule of when fixed BF52x parts will be available.

-robin

QuoteReplyEditDelete

2008-04-29 18:18:57     Re: bf52x vs bf537

Mike Frysinger (UNITED STATES)

Message: 55248    we just do software here and complaints about hardware (which are clearly justified) fall on deaf ears

now if you were to complain to an FAE or a distributor ...

  • Created
Was this helpful?

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.