[#4104] Format usbdisk failed with mke2fs in trunk
Submitted By: Vivi Li
Open Date
2008-05-15 08:35:53 Close Date
2008-05-19 22:50:40
Priority:
Medium Assignee:
Bryan Wu
Status:
Closed Fixed In Release:
N/A
Found In Release:
N/A Release:
Category:
N/A Board:
N/A
Processor:
N/A Silicon Revision:
Is this bug repeatable?:
Yes Resolution:
Fixed
Uboot version or rev.:
Toolchain version or rev.:
08r1-rc8
App binary format:
N/A
Summary: Format usbdisk failed with mke2fs in trunk
Details:
Format usbdisk failed with mke2fs in BF527-EZKIT/BF548-EZKIT in trunk.
Bellow is the log:
--
Linux version 2.6.24.7-ADI-2008R2-pre-svn4730 (test@Linux165-ViviLi) (gcc version 4.1.2 (ADI svn)) 8
console [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x00127c40
rodata = 0x00127d80-0x001841d8
bss = 0x001841e0-0x00192fe4
data = 0x00192fe4-0x001aa000
stack = 0x001a8000-0x001aa000
init = 0x001aa000-0x004cd000
available = 0x004cd000-0x03eff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Recovering from Watchdog event
Blackfin support (C) 2004-2008 Analog Devices, Inc.
Compiled for ADSP-BF527 Rev 0.0
Warning: Unsupported Chip Revision ADSP-BF527 Rev 0.0 detected
Blackfin Linux support by blackfin.uclinux.org/
Processor Speed: 525 MHz core clock and 131 MHz System Clock
NOMPU: setting up cplb tables for global access
Instruction Cache Enabled
Data Cache Enabled (write-through)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16002
Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart1,57600 console=tty0 console=ttyf
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover: boot [early_BFuart0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 59012k/65536k RAM, (3212k init code, 1179k kernel code, 521k data, 1024k dma, 584)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin Data A SRAM: 16 KB (15 KB free)
Blackfin Data B SRAM: 16 KB (16 KB free)
Blackfin Instruction SRAM: 48 KB (42 KB free)
Security Framework initialized
Mount-cache hash table entries: 512
net_namespace: 64 bytes
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
stamp_init(): registering device resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
musb_hdrc: version 6.0, pio, host, debug=0
musb_hdrc: kernel must blacklist external hubs
musb_hdrc: USB Host mode controller at ffc03800 using PIO, IRQ 59
musb_hdrc musb_hdrc.0: MUSB HDRC host driver
musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
bfin-otp: initialized
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc02000 (irq = 31) is a BFIN-UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
bfin_mac_mdio: probed
bfin_mac: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1, mdc_clk=2500000Hz(mdc_d)
bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1
Driver 'sd' needs updating - please use bus_type methods
bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500,7
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 01:49:28 UTC (6568)
usb 1-1: new high speed USB device using musb_hdrc and address 2
IP-Config: Gateway not on directly connected network.
Freeing unused kernel memory: 3212k freed
dma_alloc_init: dma_page @ 0x004ca000 - 256 pages at 0x03f00000
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - blackfin.uclinux.org/
\ YP" `| 8P `. - docs.blackfin.uclinux.org/
/ \.___.d| .' - www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.10.1 (2008-05-15 16:37:37 CST) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/>
scsi 0:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 6.51 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 2025471 512-byte hardware sectors (1037 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 2025471 512-byte hardware sectors (1037 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
root:/> version
kernel: Linux release 2.6.24.7-ADI-2008R2-pre-svn4730, build #129 Thu May 15 20:21:20 CST 2008
toolchain: bfin-uclinux-gcc release gcc version 4.1.2 (ADI svn)
user-dist: release svn-6677, build #65 Thu May 15 20:20:28 CST 2008
root:/> fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 32 heads, 62 sectors, 1020 cylinders
Units = cylinders of 1984 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 1020 1011809 83 Linux
Command (m for help): q
root:/>
root:/> mke2fs /dev/sda1
mke2fs 1.40.8 (13-Mar-2008)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/sda1 is mounted.
Warning: 256-byte inodes not usable on older systems
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
63360 inodes, 252952 blocks
12647 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=260046848
8 block groups
32768 blocks per group, 32768 fragments per group
7920 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: musb_h_tx_flush_fifo 124: Could not flush host TX fifo: csr: 0083
usb 1-1: reset high speed USB device using musb_hdrc and address 2
usb 1-1: reset high speed USB device using musb_hdrc and address 2
usb 1-1: reset high speed USB device using musb_hdrc and address 2
usb 1-1: reset high speed USB device using musb_hdrc and address 2
usb 1-1: reset high speed USB device using musb_hdrc and address 2
sd 0:0:0:0: Device offlined - not ready after error recovery
sd 0:0:0:0: [sda] Result: hostbyte=0x05 driverbyte=0x00
end_request: I/O error, dev sda, sector 4018
Buffer I/O error on device sda1, logical block 1978
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1979
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1980
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1981
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1982
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1983
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1984
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1985
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1986
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1987
lost page write due to I/O error on sda1
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sda, sector 4258
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
done
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
Writing superblocks and filesystem accounting information: sd 0:0:0:0: rejecting I/O to offline deve
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
done
This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
root:/>
--
Follow-ups
--- Bryan Wu 2008-05-15 23:17:58
Yes, I found this trunk bug in BF548-EZKIT.
I guess it is introduced by the USB stack updating.
But the 08R1 branch is OK.
-Bryan
--- Bryan Wu 2008-05-16 07:31:49
Fixed in the trunk.
----
Linux version 2.6.24.7-ADI-2008R2-pre-svn4753 (roc@roc-desktop) (gcc version
4.1.2 (ADI svn)) #5 Fri May 16 19:30:10 CST 2008
console [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x0012c880
rodata = 0x0012c9c0-0x001a6f08
bss = 0x001a6f20-0x001b61c4
data = 0x001b61c4-0x001ce000
stack = 0x001cc000-0x001ce000
init = 0x001ce000-0x004bb000
available = 0x004bb000-0x03eff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Reset caused by Software reset
Blackfin support (C) 2004-2008 Analog Devices, Inc.
Compiled for ADSP-BF527 Rev 0.0
Warning: Unsupported Chip Revision ADSP-BF527 Rev 0.0 detected
Blackfin Linux support by blackfin.uclinux.org/
Processor Speed: 525 MHz core clock and 131 MHz System Clock
NOMPU: setting up cplb tables for global access
Instruction Cache Enabled
Data Cache Enabled (write-through)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16002
Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600
ip=192.168.0.66:192.168.0.55:10.100.4.174:255.255.255.0:BFIN:ethf
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover: boot [early_BFuart0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 59084k/65536k RAM, (2996k init code, 1198k kernel code, 646k
data, 1024k dma, 584k reserved)
Blackfin Scratchpad data SRAM: 4 KB
Blackfin Data A SRAM: 16 KB (15 KB free)
Blackfin Data B SRAM: 16 KB (16 KB free)
Blackfin Instruction SRAM: 48 KB (42 KB free)
Security Framework initialized
Mount-cache hash table entries: 512
net_namespace: 64 bytes
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
stamp_init(): registering device resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
musb_hdrc: version 6.0, pio, host, debug=0
musb_hdrc: USB Host mode controller at ffc03800 using PIO, IRQ 59
musb_hdrc musb_hdrc.0: MUSB HDRC host driver
musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
bfin-otp: initialized
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc02000 (irq = 31) is a BFIN-UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
bfin_mac_mdio: probed
bfin_mac: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1,
mdc_clk=2500000Hz(mdc_div=25)@sclk=131MHz)
bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1
Driver 'sd' needs updating - please use bus_type methods
bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Controller Driver, Version 1.0,
regs_base@ffc00500, dma channel@7
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 00:05:24 UTC (324)
usb 1-1: new high speed USB device using musb_hdrc and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
IP-Config: Gateway not on directly connected network.
Freeing unused kernel memory: 2996k freed
dma_alloc_init: dma_page @ 0x004b8000 - 256 pages at 0x03f00000
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - blackfin.uclinux.org/
\ YP" `| 8P `. - docs.blackfin.uclinux.org/
/ \.___.d| .' - www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.10.1 (2008-05-16 19:05:56 CST) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/> PHY: 0:01 - Link is Up - 100/Full
root:/>
root:/> scsi 0:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 6.51 PQ: 0
ANSI: 0 CCS
sd 0:0:0:0: [sda] 2014271 512-byte hardware sectors (1031 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 2014271 512-byte hardware sectors (1031 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
root:/> sd 0:0:0:0: [sda] Attached SCSI removable disk
root:/> mke2fs /dev/sda1
mke2fs 1.40.8 (13-Mar-2008)
ext2fs_check_if_mount: No such file or directory while determining whether
/dev/sda1 is mounted.
Warning: 256-byte inodes not usable on older systems
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
62976 inodes, 251712 blocks
12585 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=260046848
8 block groups
32768 blocks per group, 32768 fragments per group
7872 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
----
Also test on BF548 and BF537.
-Bryan
--- Vivi Li 2008-05-19 22:50:38
OK now. Close it. Thanks!
Files
Changes
Commits
Dependencies
Duplicates
Associations
Tags
File Name File Type File Size Posted By
No Files Were Found