[#4513] Fail to boot jffs2 kernel for BF561 with SMP patch

Submitted By: Vivi Li

Open Date

2008-10-13 22:49:58 Close Date

2008-11-11 01:53:49

Priority:

Medium Assignee:

Graf Yang

Status:

Closed Fixed In Release:

N/A

Found In Release:

N/A Release:

Category:

N/A Board:

N/A

Processor:

N/A Silicon Revision:

Is this bug repeatable?:

Yes Resolution:

Fixed

Uboot version or rev.:

Toolchain version or rev.:

toolchain-2008_Oct_10

App binary format:

N/A

Summary: Fail to boot jffs2 kernel for BF561 with SMP patch

Details:

Fail to boot jffs2 kernel for BF561 with SMP patch. Bellow is the log:

Linux version 2.6.26.5-ADI-2009R1-pre-svn5401-dirty (test@uclinux65-561-SMP) (gcc version 4.1.2 (ADI svn)) #4 SMP Mon Oct 13 18:11:44 GMT 2008^M

console [early_BFuart0] enabled^M

early printk enabled on early_BFuart0^M

Warning: limiting memory to 56MB due to hardware anomaly 05000263^M

Board Memory: 64MB^M

Kernel Managed Memory: 64MB^M

Memory map:^M

fixedcode = 0x00000400-0x00000490^M

text = 0x00001000-0x00126800^M

rodata = 0x00126800-0x0017ae08^M

bss = 0x0017ae20-0x0018ac74^M

data = 0x0018ac80-0x0019e000^M

stack = 0x0019c000-0x0019e000^M

init = 0x0019e000-0x001b9000^M

available = 0x001b9000-0x037ff000^M

DMA Zone = 0x03f00000-0x04000000^M

Hardware Trace Active and Enabled^M

Reset caused by Software reset^M

Compiled for ADSP-BF561 Rev 0.3^M

Warning: Compiled for Rev 3, but running on Rev 5^M

Blackfin Linux support by blackfin.uclinux.org/^M

Processor Speed: 600 MHz core clock and 50 MHz System Clock^M

NOMPU: setting up cplb tables for global access^M

Instruction Cache Enabled for CPU0^M

Data Cache Enabled for CPU0 (write-through)^M

Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14223^M

Kernel command line: root=/dev/mtdblock2 rw rootfstype=jffs2 earlyprintk=serial,uart0,57600^M

Configuring Blackfin Priority Driven Interrupts^M

PID hash table entries: 256 (order: 8, 1024 bytes)^M

console handover: boot [early_BFuart0] -> real [ttyBF0]^M

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)^M

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)^M

Memory available: 54968k/65536k RAM, (108k init code, 1174k kernel code, 478k data, 1024k dma, 7784k reserved)^M

Security Framework initialized^M

Mount-cache hash table entries: 512^M

CoreB bootstrap code to SRAM ff600000 via DMA.^M

Booting Core B.^M

Instruction Cache Enabled for CPU1^M

Data Cache Enabled for CPU1 (write-through)^M

PDA for CPU1 reserved at ff700000^M

Brought up 2 CPUs^M

SMP: Total of 2 processors activated (1167.36 BogoMIPS).^M

Blackfin Scratchpad data SRAM: 4 KB^M

Blackfin L1 Data A SRAM: 16 KB (16 KB free)^M

Blackfin L1 Data B SRAM: 16 KB (16 KB free)^M

Blackfin L1 Instruction SRAM: 16 KB (15 KB free)^M

Blackfin L2 SRAM: 128 KB (128 KB free)^M

PDA for CPU0 reserved at ffb00000^M

net_namespace: 200 bytes^M

NET: Registered protocol family 16^M

Blackfin GPIO Controller^M

Blackfin DMA Controller^M

ezkit_init(): registering device resources^M

NET: Registered protocol family 2^M

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)^M

TCP established hash table entries: 2048 (order: 2, 16384 bytes)^M

TCP bind hash table entries: 2048 (order: 2, 16384 bytes)^M

TCP: Hash tables configured (established 2048 bind 2048)^M

TCP reno registered^M

NET: Registered protocol family 1^M

JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.^M

msgmni has been set to 107^M

io scheduler noop registered^M

io scheduler anticipatory registered (default)^M

io scheduler cfq registered^M

Serial: Blackfin serial driver^M

bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 35) is a BFIN-UART^M

brd: module loaded^M

smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>^M

eth0: SMC91C11xFD (rev 2) at 2c010300 IRQ 82 [nowait]^M

eth0: Ethernet addr: 00:e0:22:fe:ba:2a^M

physmap platform flash device: 00800000 at 20000000^M

physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank^M

Amd/Fujitsu Extended Query Table at 0x0040^M

physmap-flash.0: Swapping erase regions for broken CFI table.^M

number of CFI chips: 1^M

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.^M

RedBoot partition parsing not available^M

Using physmap partition information^M

Creating 3 MTD partitions on "physmap-flash.0":^M

0x00000000-0x00040000 : "bootloader(nor)"^M

0x00040000-0x00200000 : "linux kernel(nor)"^M

0x00200000-0x00800000 : "file system(nor)"^M

bfin-spi bfin-spi.0: Blackfin BF5xx on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@16^M

TCP cubic registered^M

NET: Registered protocol family 17^M

VFS: Mounted root (jffs2 filesystem).^M

Freeing unused kernel memory: 108k freed^M

dma_alloc_init: dma_page @ 0x001b3000 - 256 pages at 0x03f00000^M

Follow-ups

--- Graf Yang 2008-10-18 04:52:44

In cplb-nompu initial process, the lock_kernel_check() logic lost one case that

the cplb block embrace the kernel area, cause the kernel area cplb entry can be

swapped out. This cause the cplb_mgr double fault.

--- Vivi Li 2008-11-11 01:53:49

OK now. Close it.

Thanks!

Files

Changes

Commits

Dependencies

Duplicates

Associations

Partner Forums

Partner Libraries

[#4513] Fail to boot jffs2 kernel for BF561 with SMP patch