[#4657] tftlcd bf537-lq035 module fails to be inserted now
Submitted By: Mingquan Pan
Open Date
2008-11-20 03:14:35 Close Date
2008-12-19 03:03:08
Priority:
Medium Assignee:
Mingquan Pan
Status:
Closed Fixed In Release:
N/A
Found In Release:
N/A Release:
Category:
N/A Board:
N/A
Processor:
N/A Silicon Revision:
Is this bug repeatable?:
Yes Resolution:
Assigned (Not Start)
Uboot version or rev.:
Toolchain version or rev.:
Nov 11
App binary format:
N/A
Summary: tftlcd bf537-lq035 module fails to be inserted now
Details:
tftlcd bf537-lq035 module fails to be inserted on trunk from about Nov 11.
Loading .text @ 0x00001000 (1086656 bytes)
Loading .rodata @ 0x0010a4c0 (260464 bytes)
Loading .init.rodata @ 0x00149e30 (80 bytes)
Loading __ksymtab @ 0x00149e80 (15880 bytes)
Loading __ksymtab_gpl @ 0x0014dc88 (5064 bytes)
Loading __ksymtab_strings @ 0x0014f050 (46782 bytes)
Loading __init_rodata @ 0x0015a710 (172 bytes)
Loading __param @ 0x0015a7bc (380 bytes)
Clearing .bss @ 0x0015a940 (65524 bytes)
Loading .data @ 0x0016a934 (63180 bytes)
Loading .init.text @ 0x0017a000 (100020 bytes)
Loading .init.data @ 0x001926b4 (13660 bytes)
Loading .init.setup @ 0x00195c10 (588 bytes)
Loading .initcall.init @ 0x00195e5c (544 bytes)
Loading .con_initcall.init @ 0x0019607c (4 bytes)
Loading .init.ramfs @ 0x00196080 (3186965 bytes)
Loading .text_l1 @ 0xffa00000 (6952 bytes)
sh_addr: FFA00000, p_paddr: 004A0195
Loading from: 02492000 to 004A0195, size: 6952
Loading .data_l1 @ 0xff800000 (192 bytes)
sh_addr: FF800000, p_paddr: 004A1CBD
Loading from: 02494000 to 004A1CBD, size: 192
## Starting application at 0x00188248 ...
Linux version 2.6.28-rc2-ADI-2009R1-pre-svn5623 (test@uclinux52-ad73311-lcd) (gcc version 4.1.2 (ADI svn)) #29 Wed Nov 12 06:59:15 CST 2008
console [early_BFuart0] enabled
early printk enabled on early_BFuart0
Warning: limiting memory to 56MB due to hardware anomaly 05000263
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x0010a4c0
rodata = 0x0010a4c0-0x0015a938
bss = 0x0015a940-0x0016a934
data = 0x0016a934-0x0017a000
stack = 0x00178000-0x0017a000
init = 0x0017a000-0x004a2000
available = 0x004a2000-0x037ff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Reset caused by Software reset
Blackfin support (C) 2004-2008 Analog Devices, Inc.
Compiled for ADSP-BF537 Rev 0.2
Blackfin Linux support by blackfin.uclinux.org/
Processor Speed: 500 MHz core clock and 100 MHz System Clock
NOMPU: setting up cplb tables for global access
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-through)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14223
Kernel command line: root=/dev/mtdblock0 rw earlyprintk=serial,uart0,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:255.255.255.0:BF537:eth0:off
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover: boot [early_BFuart0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 52016k/65536k RAM, (3232k init code, 1061k kernel code, 447k data, 1024k dma, 7756k reserved)
Calibrating delay loop... 997.37 BogoMIPS (lpj=1994752)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (15 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 48 KB (41 KB free)
PDA for CPU0 reserved at 0015bcc8
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin GPIO Controller
Blackfin DMA Controller
stamp_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 101
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART
brd: module loaded
bfin_mac_mdio: probed
bfin_mac: attached PHY driver [SMSC LAN83C185] (mii_bus:phy_addr=0:01, irq=-1, mdc_clk=2500000Hz(mdc_div=19)@sclk=100MHz)
bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
TCP cubic registered
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 02:20:34 UTC (8434)
IP-Config: Complete:
device=eth0, addr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174,
host=BF537, domain=, nis-domain=(none),
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=
Freeing unused kernel memory: 3232k freed
dma_alloc_init: dma_page @ 0x0049e000 - 256 pages at 0x03f00000
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - blackfin.uclinux.org/
\ YP" `| 8P `. - docs.blackfin.uclinux.org/
/ \.___.d| .' - www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.12.1 (2008-11-12 06:08:38 CST) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/>
************** STEP 3: Start testing.
PHY: 0:01 - Link is Up - 100/Full
root:/> modprobe bf537-lq035
i2c-bfin-twi i2c-bfin-twi.0: Blackfin BF5xx on-chip I2C TWI Contoller, regs_base@ffc01400
bf537-lq035: FrameBuffer initializing...<5>Hardware Trace:
0 Target : <0x00004888> { _dump_stack + 0x0 }
Source : <0x00005fa4> { _peripheral_request + 0x13c } CALL pcrel
1 Target : <0x00005fa4> { _peripheral_request + 0x13c }
Source : <0x00005eb6> { _peripheral_request + 0x4e } IF !CC JUMP
2 Target : <0x00005e8a> { _peripheral_request + 0x22 }
Source : <0x00005e84> { _peripheral_request + 0x1c } IF !CC JUMP
3 Target : <0x00005e82> { _peripheral_request + 0x1a }
Source : <0x00005e76> { _peripheral_request + 0xe } IF !CC JUMP
4 Target : <0x00005e68> { _peripheral_request + 0x0 }
Source : <0x00006010> { _peripheral_request_list + 0x24 } CALL pcrel
5 Target : <0x00006000> { _peripheral_request_list + 0x14 }
Source : <0x00006018> { _peripheral_request_list + 0x2c } IF CC JUMP
6 Target : <0x00006014> { _peripheral_request_list + 0x28 }
Source : <0x00005e80> { _peripheral_request + 0x18 } RTS
7 Target : <0x00005e78> { _peripheral_request + 0x10 }
Source : <0x00005f38> { _peripheral_request + 0xd0 } JUMP.S
8 Target : <0x00005f38> { _peripheral_request + 0xd0 }
Source : <0x00005472> { _set_label + 0x3e } RTS
9 Target : <0x0000546c> { _set_label + 0x38 }
Source : <0x00005466> { _set_label + 0x32 } IF !CC JUMP
10 Target : <0x00005462> { _set_label + 0x2e }
Source : <0x0000546a> { _set_label + 0x36 } JUMP.S
11 Target : <0x00005462> { _set_label + 0x2e }
Source : <0x0000546a> { _set_label + 0x36 } JUMP.S
12 Target : <0x00005462> { _set_label + 0x2e }
Source : <0x0000546a> { _set_label + 0x36 } JUMP.S
13 Target : <0x00005462> { _set_label + 0x2e }
Source : <0x0000546a> { _set_label + 0x36 } JUMP.S
14 Target : <0x00005460> { _set_label + 0x2c }
Source : <0x00005456> { _set_label + 0x22 } IF !CC JUMP
15 Target : <0x00005450> { _set_label + 0x1c }
Source : <0x0000545c> { _set_label + 0x28 } IF CC JUMP
Stack info:
SP: [0x031ffc38] <0x031ffc38> /* kernel dynamic memory */
FP: (0x031ffc38)
Memory from 0x031ffc30 to 03200000
031ffc30: 031ffc38 037a15a0 [00000000]<00005fa8> 031ffcd0 00008203 031ffc64 <00109150>
031ffc50: 0015b8bc 00000000 037f5000 <00006014> 031ffcd0 00005fec 0000ea5c 00000000
031ffc70: 00000003 037a0b48 00000000 0015b8bc 037a15a0 00000000 <0038f098> 031ffcd0
031ffc90: 031ffcac 0016c4fc 037a15a0 <0007383a> 0000ffff 00000001 037ef508 8010800f
031ffcb0: 80128011 80148013 80168015 80188017 801a8019 801c801b 801e801d 0000801f
031ffcd0: 80088009 82038004 00008202 037a15a0 <000a1958> 0016c504 037a15a0 001682b8
031ffcf0: 0016c5b0 000000ac 037a15a0 00000000 <00107ae6><00107b0e> 0016c410 <000a1ab0>
031ffd10: 0016c504 037a15a0 0000002b 0016c5b0 001729ac 0000002b 00000000 <000a113a>
031ffd30: 000a1a44 001729ac 00000000 031ffd4c 037c1ce0 <0008a68c> 0015a964 037fb5d8
031ffd50: 0016c54c <000a1802> 0015a964 00000000 037c1ce0 00000000 031ffd8c 031ffd8c
031ffd70:<000a1502> 000a1a44 <000a1520> 037a17cc 037f5000 00073370 00133d20 037a0b48
031ffd90: 00369e50 <000a1c0c> 0015a964 037a15a0 0000002b 00384004 000037a0 031ffdc4
031ffdb0:<037a09c6> 0015a964 <00001028> 0015a964 037a09b0 00384004 000037a0 00000000
031ffdd0: 037a17cc 031ffde8 00000000 00000000 00000000 00000001 031f8be8 00000000
031ffdf0: 00000000 00000001 <00074de6> 0038ca48 031f8be8 00000000 0000000c 037a1790
031ffe10:<00039d0a> 0038c9f0 00000124 031f8be8 0038ca4c <0002b31a> 0038ca18 0038c800
031ffe30:<0002b5ac> 0038ca18 00000017 00000000 00398000 031ffeb0 037a0d1c 00000003
031ffe50: 00000000 031ffeb4 031ffe58 00399c08 00399b40 00399be0 037a0d1c 00399898
031ffe70: 003997d8 003825c0 0039a070 00000015 00000000 00000044 00000044 037b8530
031ffe90: 00399898 00000000 00000000 00000000 00000000 00000000 00000000 00000000
031ffeb0: 00000000 <00022344> 037a1784 00384004 000037a0 <0002b702> 037a1784 00000080
031ffed0: 00384004 000037a0 0035f204 00000000 00000000 <0003e6ba> 037980a0 00748f20
031ffef0: ffffe000 <ffa008cc> 0002b690 00000000 ffffe000 00000000 <0031a4a2> ffffe000
031fff10: 002e0380 0000fffe 000037a0 <0031a4a2> 00000000 003025e0 00008000 00002000
031fff30: 00000000 03200000 003025e0 003025e0 <0031c504><ffa00e34> 02003004 0028be11
031fff50: 0030d0a1 0028be10 0030d0a0 00000000 00000000 00000000 00000000 00000000
031fff70: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
031fff90: 00000000 00000000 00000000 0378408c 00000000 00000000 00000000 03784094
031fffb0: 00369e45 00369e44 00369e50 00369f38 00369f30 0000002b 003877a4 00387ff4
031fffd0: 00000080 00356e41 0035f204 00000000 <0031a4a2> 000037a0 0035f204 000037a0
031ffff0: 00384004 00384004 00000080 00000006 544c4662
Return addresses in stack:
frame 1 : <0x00005fa8> { _peripheral_request + 0x140 }
address : <0x00109150> { __cond_resched + 0x34 }
address : <0x00006014> { _peripheral_request_list + 0x28 }
address : <0x0038f098> /* kernel dynamic memory */
address : <0x0007383a> { _sysfs_new_dirent + 0x42 }
address : <0x000a1958> { _driver_probe_device + 0x80 }
address : <0x00107ae6> { _klist_next + 0x26 }
address : <0x00107b0e> { _klist_next + 0x4e }
address : <0x000a1ab0> { ___driver_attach + 0x6c }
address : <0x000a113a> { _bus_for_each_dev + 0x3a }
address : <0x0008a68c> { _kobject_init_and_add + 0x24 }
address : <0x000a1802> { _driver_attach + 0x1a }
address : <0x000a1502> { _bus_add_driver + 0x66 }
address : <0x000a1520> { _bus_add_driver + 0x84 }
address : <0x000a1c0c> { _driver_register + 0x40 }
address : <0x037a09c6> { :bf537_lq035:_init_module + 0x16 }
address : <0x00001028> { _do_one_initcall + 0x28 }
address : <0x00074de6> { _internal_create_group + 0xbe }
address : <0x00039d0a> { _kstrdup + 0x1e }
address : <0x0002b31a> { _load_module + 0xd72 }
address : <0x0002b5ac> { _load_module + 0x1004 }
address : <0x00022344> { _blocking_notifier_call_chain + 0x10 }
address : <0x0002b702> { _sys_init_module + 0x72 }
address : <0x0003e6ba> { _sys_close + 0x66 }
address : <0xffa008cc> { _system_call + 0x68 }
address : <0x0031a4a2> [ insmod + 0x1a462 ]
address : <0x0031a4a2> [ insmod + 0x1a462 ]
address : <0x0031c504> [ insmod + 0x1c4c4 ]
address : <0xffa00e34> { _evt_system_call + 0x64 }
address : <0x0031a4a2> [ insmod + 0x1a462 ]
peripheral_request: Peripheral 3 is already reserved as GPIO by bfin_nand_plat !
Requesting Peripherals TMR faild
bf537-lq035: couldn't request gpio port.
bf537-lq035: probe of bf537-lq035.0 failed with error -14
root:/>
Case 1 ...FAIL
config attached.
Follow-ups
--- Mike Frysinger 2008-11-20 08:45:47
looks like a bug in the test scripts ... you cant enable lq035 and nand plat at
the same time ?
peripheral_request: Peripheral 3 is already reserved as GPIO by bfin_nand_plat
--- Mingquan Pan 2008-12-19 03:03:08
It is ok now. Close.
Files
Changes
Commits
Dependencies
Duplicates
Associations
Tags
File Name File Type File Size Posted By
config.tftlcd.landscape application/octet-stream 32521 Mingquan Pan