[#5364] ad1981b fails to work on bf533-stamp
Submitted By: Vivi Li
Open Date
2009-07-16 05:57:25 Close Date
2009-07-22 23:54:54
Priority:
Medium High Assignee:
Cliff Cai
Status:
Closed Fixed In Release:
N/A
Found In Release:
N/A Release:
Category:
Audio Board:
STAMP
Processor:
BF533 Silicon Revision:
Is this bug repeatable?:
Yes Resolution:
Rejected
Uboot version or rev.:
Toolchain version or rev.:
gcc4.1_09r1-rc9
App binary format:
N/A
Summary: ad1981b fails to work on bf533-stamp
Details:
For ad1981b on bf533-stamp, AD1980 AC97 reset failed for ad1981b v0.3 board; for ad1981b v0.1 board, reset ok, and tone is ok, but no sound output for alsa and oss tools.
Bellow is the log for ad1981b v0.3:
--
Linux version 2.6.28.10-ADI-2009R1-svn7006 (test@uclinux77-bf533-ad1836-spi) (gcc version 4.1.2 (ADI svn)) #20 Wed Jul 15 21:06:9
bootconsole [early_shadow0] enabled
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Warning: limiting memory to 56MB due to hardware anomaly 05000263
Board Memory: 128MB
Kernel Managed Memory: 128MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x001216b0
rodata = 0x001216b0-0x001777dc
bss = 0x00178000-0x00188c10
data = 0x00188c10-0x00198000
stack = 0x00196000-0x00198000
init = 0x00198000-0x0082b000
available = 0x0082b000-0x037ff000
DMA Zone = 0x07e00000-0x08000000
Hardware Trace Active and Enabled
Boot Mode: 0
Reset caused by Software reset
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF533 Rev 0.3
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 497 MHz core clock and 99 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14223
Kernel command line: root=/dev/mtdblock0 rw clkin_hz=11059200 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50f
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 48408k/131072k RAM, (6732k init code, 1153k kernel code, 475k data, 2048k dma, 72256k reserved)
Calibrating delay loop... 991.23 BogoMIPS (lpj=1982464)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (15 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 64 KB (53 KB free)
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin DMA Controller
stamp_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 94
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
brd: module loaded
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 20300300 IRQ 40 [nowait]
eth0: Ethernet addr: 00:e0:22:fe:04:cc
bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
dma rx:1 tx:2, err irq:10, regs:ffc00800
AD1980 SoC Audio Codec
dma_alloc_init: dma_page @ 0x0310e000 - 512 pages at 0x07e00000
asoc: AC97 <-> bf5xx-ac97 mapping ok
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
bf5xx_ac97_cold_reset: Not implemented
AD1980 AC97 reset failed
AC97 link error
soc-audio: probe of soc-audio failed with error -5
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting system clock to 1975-03-03 00:05:50 UTC (163037150)
eth0: link down
IP-Config: Complete:
device=eth0, addr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174,
host=bf533-stamp, domain=, nis-domain=(none),
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=
Freeing unused kernel memory: 6732k freed
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
\ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ \.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.13.4 (2009-07-15 21:03:20 MDT) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/> version
kernel: Linux release 2.6.28.10-ADI-2009R1-svn7006, build #20 Wed Jul 15 21:06:49 MDT 2009
toolchain: bfin-linux-uclibc-gcc release gcc version 4.1.2 (ADI svn)
user-dist: release svn-8498, build #323 Wed Jul 15 21:06:00 MDT 2009
root:/>
--
Bellow is the log for ad1981b v0.1:
--
Linux version 2.6.28.10-ADI-2009R1-svn7006 (test@uclinux77-bf533-ad1836-spi) (gcc version 4.1.2 (ADI svn)) #20 Wed Jul 15 21:06:9
bootconsole [early_shadow0] enabled
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Warning: limiting memory to 56MB due to hardware anomaly 05000263
Board Memory: 128MB
Kernel Managed Memory: 128MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x001216b0
rodata = 0x001216b0-0x001777dc
bss = 0x00178000-0x00188c10
data = 0x00188c10-0x00198000
stack = 0x00196000-0x00198000
init = 0x00198000-0x0082b000
available = 0x0082b000-0x037ff000
DMA Zone = 0x07e00000-0x08000000
Hardware Trace Active and Enabled
Boot Mode: 0
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF533 Rev 0.3
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 497 MHz core clock and 99 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14223
Kernel command line: root=/dev/mtdblock0 rw clkin_hz=11059200 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50f
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 48408k/131072k RAM, (6732k init code, 1153k kernel code, 475k data, 2048k dma, 72256k reserved)
Calibrating delay loop... 991.23 BogoMIPS (lpj=1982464)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (15 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 64 KB (53 KB free)
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin DMA Controller
stamp_init(): registering device resources
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 94
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 21) is a BFIN-UART
brd: module loaded
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 20300300 IRQ 40 [nowait]
eth0: Ethernet addr: 00:e0:22:fe:04:cc
bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@5
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ASoC version 0.13.2
dma rx:1 tx:2, err irq:10, regs:ffc00800
AD1980 SoC Audio Codec
dma_alloc_init: dma_page @ 0x0310e000 - 512 pages at 0x07e00000
asoc: AC97 <-> bf5xx-ac97 mapping ok
bf5xx_ac97_cold_reset: Not implemented
ad1980: Found AD1981 - only 2/2 IN/OUT Channels supported
ALSA device list:
#0: bf5xx-board (AD1980)
TCP cubic registered
NET: Registered protocol family 17
rtc-bfin rtc-bfin: setting system clock to 2036-08-06 15:00:09 UTC (2101647609)
eth0: link down
IP-Config: Complete:
device=eth0, addr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174,
host=bf533-stamp, domain=, nis-domain=(none),
bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=
Freeing unused kernel memory: 6732k freed
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
\ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ \.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.13.4 (2009-07-15 21:03:20 MDT) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/> tone
TONE: generating sine wave at 1000 Hz...
root:/>
root:/> arecord -t wav -c 2 -f S16_LE -r 8000 -d 5 wav
Recording WAVE 'wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo
root:/> aplay wav
Playing WAVE 'wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo
root:/>
root:/> version
kernel: Linux release 2.6.28.10-ADI-2009R1-svn7006, build #20 Wed Jul 15 21:06:49 MDT 2009
toolchain: bfin-linux-uclibc-gcc release gcc version 4.1.2 (ADI svn)
user-dist: release svn-8498, build #323 Wed Jul 15 21:06:00 MDT 2009
root:/>
--
Follow-ups
--- Cliff Cai 2009-07-21 23:49:32
The two cards you used seems bad(one of it even causes reset signal of board to
be wrong).I've tried the other three cards,they work just fine.
Cliff
--- Vivi Li 2009-07-22 23:54:54
OK now. Close it.
Files
Changes
Commits
Dependencies
Duplicates
Associations
Tags
File Name File Type File Size Posted By
config.audio_ad1981b application/octet-stream 30989 Vivi Li