[#5380] Bluetooth CF card didn't work on BF537-STAMP
Submitted By: Vivi Li
Open Date
2009-07-22 05:34:31 Close Date
2009-07-23 04:55:32
Priority:
Medium High Assignee:
Michael Hennerich
Status:
Closed Fixed In Release:
N/A
Found In Release:
N/A Release:
Category:
Drivers Board:
STAMP
Processor:
BF537 Silicon Revision:
Is this bug repeatable?:
Yes Resolution:
Rejected
Uboot version or rev.:
Toolchain version or rev.:
gcc4.1_2009r1-rc9
App binary format:
N/A
Summary: Bluetooth CF card didn't work on BF537-STAMP
Details:
Bluetooth CF card didn't work on BF537-STAMP.
--
Linux version 2.6.28.10-ADI-2009R1-svn7053 (test@uboot34-bf537stamp) (gcc version 4.1.2 (ADI svn)) #36 Wed Jul 22 17:13:41 CST 29
bootconsole [early_shadow0] enabled
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Warning: limiting memory to 56MB due to hardware anomaly 05000263
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x0011efd0
rodata = 0x0011efd0-0x001763a8
bss = 0x00177000-0x001887c0
data = 0x001887c0-0x0019a000
stack = 0x00198000-0x0019a000
init = 0x0019a000-0x00736000
available = 0x00736000-0x037ff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Boot Mode: 0
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF537 Rev 0.2
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 500 MHz core clock and 62 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14223
Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50f
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 49388k/65536k RAM, (5744k init code, 1143k kernel code, 493k data, 1024k dma, 7744k reserved)
Calibrating delay loop... 993.28 BogoMIPS (lpj=1986560)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (15 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 48 KB (36 KB free)
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin DMA Controller
stamp_init(): registering device resources
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 96
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART
brd: module loaded
bfin_mii_bus: probed
bfin_mac: attached PHY driver [SMSC LAN83C185] (mii_bus:phy_addr=0:01, irq=-1, mdc_clk=2500000Hz(mdc_div=11)@sclk=62MHz)
bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1
bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@7
bfin_cf_pcmcia bfin_cf_pcmcia: Blackfin CompactFlash/PCMCIA Socket Driver
bfin_cf_pcmcia bfin_cf_pcmcia: : on irq 54
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 00:17:15 UTC (1035)
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
IP-Config: Gateway not on directly connected network.
Freeing unused kernel memory: 5744k freed
dma_alloc_init: dma_page @ 0x00733000 - 256 pages at 0x03f00000
PHY: 0:01 - Link is Up - 100/Full
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
\ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ \.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.13.4 (2009-07-22 17:12:08 CST) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/> hciconfig
hci0: Type: PCCARD
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
root:/> hcitool scan
Device is not available: No such device
root:/>
--
Follow-ups
--- Michael Hennerich 2009-07-23 03:27:33
Hi Vivi,
not a bug -
you need to bring the interface up -
using:
root:/> hciconfig hci0 up
See below -
Linux version 2.6.28.10-ADI-2009R1-svn7053 (michael@mhenneri-D02) (gcc version
4.1.2 (ADI svn)) #231 Thu Jul 23 09:21:39 CEST 2009
bootconsole [early_shadow0] enabled
bootconsole [early_BFuart0] enabled
early printk enabled on early_BFuart0
Board Memory: 64MB
Kernel Managed Memory: 64MB
Memory map:
fixedcode = 0x00000400-0x00000490
text = 0x00001000-0x00131bb0
rodata = 0x00131bb0-0x001904f4
bss = 0x00191000-0x001a29c4
data = 0x001a29c4-0x001b4000
stack = 0x001b2000-0x001b4000
init = 0x001b4000-0x009b2000
available = 0x009b2000-0x03eff000
DMA Zone = 0x03f00000-0x04000000
Hardware Trace Active and Enabled
Boot Mode: 0
Blackfin support (C) 2004-2009 Analog Devices, Inc.
Compiled for ADSP-BF537 Rev 0.3
Blackfin Linux support by http://blackfin.uclinux.org/
Processor Speed: 500 MHz core clock and 125 MHz System Clock
NOMPU: setting up cplb tables
Instruction Cache Enabled for CPU0
Data Cache Enabled for CPU0 (write-back)
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16001
Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000
earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.44.2.46:10.44.2.88:1f
Configuring Blackfin Priority Driven Interrupts
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover:boot [early_BFuart0] boot [early_shadow0] -> real [ttyBF0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory available: 54012k/65536k RAM, (8184k init code, 1218k kernel code, 522k
data, 1024k dma, 572k reserved)
Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
Security Framework initialized
Mount-cache hash table entries: 512
Blackfin Scratchpad data SRAM: 4 KB
Blackfin L1 Data A SRAM: 16 KB (15 KB free)
Blackfin L1 Data B SRAM: 16 KB (16 KB free)
Blackfin L1 Instruction SRAM: 48 KB (37 KB free)
net_namespace: 288 bytes
NET: Registered protocol family 16
Blackfin DMA Controller
stamp_init(): registering device resources
SCSI subsystem initialized
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 105
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler cfq registered
Serial: Blackfin serial driver
bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART
brd: module loaded
bfin_mii_bus: probed
bfin_mac: attached PHY driver [SMSC LAN83C185] (mii_bus:phy_addr=0:01, irq=-1,
mdc_clk=2500000Hz(mdc_div=24)@sclk=125MHz)
bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1
Driver 'sd' needs updating - please use bus_type methods
bfin_cf_pcmcia bfin_cf_pcmcia: Blackfin CompactFlash/PCMCIA Socket Driver
bfin_cf_pcmcia bfin_cf_pcmcia: : on irq 54
rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0
i2c-bfin-twi i2c-bfin-twi.0: Blackfin BF5xx on-chip I2C TWI Contoller,
regs_base@ffc01400
bfin-wdt: initialized: timeout=20 sec (nowayout=0)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
rtc-bfin rtc-bfin: setting system clock to 1970-01-01 06:05:01 UTC (21901)
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
IP-Config: Gateway not on directly connected network.
Freeing unused kernel memory: 8184k freed
dma_alloc_init: dma_page @ 0x009af000 - 256 pages at 0x03f00000
PHY: 0:01 - Link is Up - 100/Full
_____________________________________
a8888b. / Welcome to the uClinux distribution \
d888888b. / _ _ \
8P"YP"Y88 / | | |_| __ __ (TM) |
8|o||o|88 _____/ | | _ ____ _ _ \ \/ / |
8' .88 \ | | | | _ \| | | | \ / |
8`._.' Y8. \ | |__ | | | | | |_| | / \ |
d/ `8b. \ \____||_|_| |_|\____|/_/\_\ |
dP . Y8b. \ For embedded processors including |
d8:' " `::88b \ the Analog Devices Blackfin /
d8" 'Y88b \___________________________________/
:8P ' :888
8a. : _a88P For further information, check out:
._/"Yaa_: .| 88P| - http://blackfin.uclinux.org/
\ YP" `| 8P `. - http://docs.blackfin.uclinux.org/
/ \.___.d| .' - http://www.uclinux.org/
`--..__)8888P`._.' jgs/a:f - http://www.analog.com/blackfin
Have a lot of fun...
BusyBox v1.13.4 (2009-07-13 10:47:27 CEST) built-in shell (msh)
Enter 'help' for a list of built-in commands.
root:/>
root:/> hciconfig
hci0: Type: PCCARD
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
root:/> hciconfig hci0 up
root:/> hciconfig
hci0: Type: PCCARD
BD Address: 00:0C:78:50:50:4F ACL MTU: 339:4 SCO MTU: 60:9
UP RUNNING PSCAN ISCAN
RX bytes:359 acl:0 sco:0 events:11 errors:0
TX bytes:50 acl:0 sco:0 commands:11 errors:0
root:/> hcitool scan
Scanning ...
00:16:41:09:6C:83 APELLKOF-L02
root:/> hcitool scan
Scanning ...
00:16:41:09:6C:83 APELLKOF-L02
root:/> version
kernel: Linux release 2.6.28.10-ADI-2009R1-svn7053, build #231 Thu Jul 23
09:21:39 CEST 2009
toolchain: bfin-uclinux-gcc release gcc version 4.1.2 (ADI svn)
user-dist: release svn-8370, build #115 Thu Jul 23 09:21:06 CEST 2009
root:/>
--- Vivi Li 2009-07-23 04:55:32
Sorry, something wrong with the script. Update it.
Close now.
Files
Changes
Commits
Dependencies
Duplicates
Associations
Tags
File Name File Type File Size Posted By
config.bt_cf application/octet-stream 32228 Vivi Li