Locale Icon
English
  • Forums

    Popular Forums

    • LTspice
    • RF and Microwave
    • Video
    • Power Management
    • Precision ADCs
    • FPGA Reference Designs
    • Linux Software Drivers

    Product Forums

    • Amplifiers
    • Microcontrollers
    • Clock and Timing
    • Data Converters
    • Direct Digital Synthesis (DDS)
    • Energy Monitoring and Metering
    • Interface and Isolation
    • MEMS Inertial Sensors
    • Power Management
    • Processors and DSP
    • Switches/Multiplexers
    • Temperature Sensors
    • Voltage References
    View All

    Application Forums

    • A2B
    • Audio
    • Automated Test Equipment (ATE)
    • Condition-Based Monitoring
    • Depth, Perception & Ranging Technologies
    • Embedded Vision Sensing Library
    • Motor Control Hardware Platforms
    • Precision Technology Signal Chains Library
    • Video
    • Wireless Sensor Networks Reference Library

    Design Center Forums

    • ACE Evaluation Software
    • ADEF System Platforms
    • Design Tools and Calculators
    • FPGA Reference Designs
    • Linux Software Drivers
    • Microcontroller no-OS Drivers
    • Reference Designs
    • Signal Chain Power (SCP)
    • Software Interface Tools
    • System Demonstration Platform (SDP) Support
  • Learn

    Highlighted Webinar

    Upcoming Webinar - Design High Performance Power Systems with Ultralow Noise Technology

    This webinar will feature ADI’s latest Silent Switcher® 3 regulators and Ultralow-noise LDOs, perfect for applications with stringent noise requirements...

    Places

    • ADI Education Home
    • ADI Webinars
    • GMSL U
    • StudentZone (Analog Dialogue)
    • Video Annex
    • Virtual Classroom

    Libraries

    • 3D ToF Depth Sensing Library
    • Continuous-Wave CMOS Time of Flight (TOF) Library
    • Embedded Vision Sensing Library
    • Gigabit Multimedia Serial Link (GMSL) Library
    • Optical Sensing Library
    • Precision Technology Signal Chains Library
    • Software Modules and SDKs Library
    • Supervisory Circuits Library
    • Wireless Sensor Networks Library

    Latest Webinars

    • Upcoming Webinar: Simplify High-Accuracy Instrumentation Design with Latest Precision Data Converters
    • Upcoming Webinar - Design High Performance Power Systems with Ultralow Noise Technology
    • Upcoming Webinar: µModule Solution for Intelligent Motion Control
    • Accelerating Embedded System Development with CodeFusion Studio™︎
    • Power Industrial PC Solutions for Robust Intelligent Edge Computing
    View All Webinars
  • Community Hub

    Challenge Yourself!

      KCC's Quizzes AQQ285 about analog voltmeter expertise

      1. Quote of the week: " If you think nobody cares if you're alive, try missing a few loan payments " - unknown Source: Wikimedia 2. New quiz...

    View All

    What's Brewing

      Read the Safety in Layers: Why a Hybrid Approach Works Blog and Test Your Knowledge

      Think you understand ISO 26262 Compliance ? Test your knowledge with our quick quiz , based on the blog " Safety in Layers: Why a Hybrid Approach Works...

    View All

    Places

    • Community Help
    • Logic Lounge
    • Super User Program

    Resources

    • EZ Code of Conduct
    • EZ How To Help Articles
    • Getting Started Guide
    • ADI: Words Matter
    • Community Help Videos
    View All
  • Blogs

    Highlighted Blogs

    How to Generate a Custom Profile for Optimal System Performance

    In the world of software-defined radio (SDR) and high-performance RF systems, properly configuring transceivers is essential for achieving optimal system...

     

    Can AI Unlock the Future for Condition-Based Monitoring at the Edge?

    In an era when equipment and energy costs are rising, industries are under increasing pressure to optimize their operations and reduce expenses. One effective...

    Latest Blogs

    • What Makes Field Bus Communication Unique
    • An Interesting Power Supply Monitoring Example from a Functional Safety Standard
    • Breaking the Barriers – Why Buildings Need DAS for Cellular Connectivity: Part 1
    • Safety in Layers: Why a Hybrid Approach Works
    • What Are the 3 Essential RF Modulation Techniques You Need to Know?
    Read All Blogs

    ADI Blogs

    • EZ Spotlight
    • The Engineering Mind
  • ContentZone

    Visit ContentZone

    ContentZone

    Technical articles. Blogs. Videos. Your ADI content, all in one place.

    View ContentZone

    Featured Content

    Featured Content Title

    Blurb About Content

    View Content By Industry

    • Aerospace and Defense Systems
    • Automotive Solutions
    • Consumer Technology Solutions
    • Data Center Solutions
    • Energy Solutions
    • Healthcare Solutions
    • Industrial Automation Technology Solutions
    • Instrumentation and Measurement Solutions
    • Intelligent Building Solutions
    • Internet of Things (IoT)
    • Wireless Communication Solutions

    View Content By Technology

    • A2B Audio Bus
    • ADI OtoSense Predictive Maintenance Solutions
    • Dynamic Speaker Management
    • Gallium Nitride (GaN) Technology
    • Gigabit Multimedia Serial Link (GMSL)
    • Industrial Vision
    • Power Solutions
    • Precision Technology
    • RF
    • Security Solutions
    • Sensor Interfaces
    • SmartMesh
  • Partners

    Partner Forums

    • Boston Engineering
    • PalmSens
    • Richardson RFPD
    • Tri-Star Design, Inc.

    Partner Libraries

    • Calian, Advanced Technologies Library
    • Clockworks Signal Processing Library
    • Colorado Engineering Inc. (DBA CAES AT&E) Library
    • Epiq Solutions Library
    • Fidus Library
    • VadaTech Library
    • Vanteon Library
    • X-Microwave Library
EngineerZone
EngineerZone
Linux Bug Archive
  • Log In
  • User
  • Site
  • Search
OR
Ask a Question
Linux Bug Archive
  • Processors and DSP
  • Software and Development Tools
  • Linux Distribution for Blackfin
  • Linux Bug Archive
  • Cancel
Linux Bug Archive
Documents [#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31
  • Q&A
  • Documents
  • Members
  • Tags
  • More
  • Cancel
  • +Documents
  • +ad1836: FAQ
  • +ad1938: FAQ
  • +ad1939: FAQ
  • +AD5280: FAQ
  • +ad73311: FAQ
  • +adau1361: FAQ
  • +adau1371: FAQ
  • +adau1373: FAQ
  • +adau1761: FAQ
  • +adp5588-gpio: FAQ
  • +adv7393: FAQ
  • +ADXL34x: FAQ
  • +bf518-ezbrd: FAQ
  • +bf518: FAQ
  • +bf51x: FAQ
  • +bf526-ezbrd: FAQ
  • +bf527-ezkit: FAQ
  • +bf533-stamp/ezkit: FAQ
  • +bf533: FAQ
  • +bf538-ezkit: FAQ
  • +bf548-ezkit: FAQ
  • +BF54x: FAQ
  • +bf561-ezkit: FAQ
  • +bf5xx: FAQ
  • +bfin-mac driver: FAQ
  • +bfin-uclinux-gdb: FAQ
  • +bfin_can.c: FAQ
  • +Blackfin: FAQ
  • +bluetooth: FAQ
  • +Build kernel: FAQ
  • +Build: FAQ
  • +cfcard test: FAQ
  • [#6170] section mismatches in cifs code(2010)
  • [#6173] linphone testing problem(2010)
  • [#6190] BF561-EZKIT SMP kernel can not wake up by uart(2010)
  • [#6194] libxenomai.so.0 can't be found in xenomai kernel with fdpic mode(2010)
  • [#6207] Build error in CTS/RTS testing on board BF548-EZKIT(2010)
  • [#6251] pread/pwrite arent decoded correctly by strace(2010)
  • [#6253] strace build failed in trunk with outdated toolchain (missing asm/cachectl.h)(2010)
  • [#6255] Busybox inetd crashes/rsh noconnet/ssh(2010)
  • [#6265] libpng build fails due to not finding zlib(2010)
  • [#6271] "nand unlock" is an unsupported command in u-boot update in nand flash(2010)
  • [#6272] After update u-boot in spi flash, BF548-EZKIT can not boot from spi flash(2010)
  • +gadget fs bulk: FAQ
  • +gadget zero bulk: FAQ
  • +gadget zero control: FAQ
  • +Kernel xip: FAQ
  • +ltp test: FAQ
  • +microwin test: FAQ
  • +MPU kernel: FAQ
  • +Sl811-hcd.c USB: FAQ
  • +SPORT channel: FAQ
  • +trunk head kernel: FAQ
  • +usb otg driver: FAQ
  • +zlib: FAQ
  • +Illegal i2c: FAQ
  • +isp1362-hcd: FAQ
  • +Kernel: FAQ
  • +KGDBOE: FAQ
  • [#4646] Varittronix LCD driver mixes blue and Red
  • +serial driver: FAQ
  • +sigma firmware: FAQ
  • +spi transaction: FAQ
  • +strace FAQ
  • [#4787] [ltp] LTP test case shmctl01 failed in trunk for ltp-full-20081130
  • +tiff-4.0.0beta4: FAQ
  • [#5264] ping packet size test will fail for gadget ethernet test with DMA mode
  • +USBHOST: FAQ
  • +USB_EP_NI7_RXINTERVAL: FAQ
  • [#5257] Build usb gadget driver with DMA mode will fail
  • [#4708] Blackfin irda build fails for bf533-stamp
  • [#4735] unaligned accesses in qt webkit
  • [#5168] build cpufrequtils into fdpic format has error
  • [#5321] modprobe i2c lcd on bf533 stamp wait long time
  • [#4922] unwanted sound comes up after g_audio module is installed on BF548 and BF527
  • [#5176] app cpufrequtils in Blackfin app programs fails to build in FDPIC
  • [#5237] musb driver is broken after linux-2.6.30 update
  • [#5255] ping target board sometimes get wrong data byte for gadget ethernet pio mode
  • [#5336] canbus and ppifcd drivers can not be built on BF538-EZKIT
  • [#6614] Kernel panic frequently when test sdio mmc on bf518-ezbrd(2011)
  • +SPI driver: FAQ
  • [#4714] the first time to build mtd-utils will fail in trunk
  • [#5524] drivers/video/bfin_adv7393fb.c build fails in 2.6.31 due to old i2c usage
  • [#5525] drivers/video/bf537-lq035.c build fails in 2.6.31 due to old i2c usage
  • [#5399] no sound when record in board and listen in PC for linphone test of ad1836 on bf533-stamp
  • [#5458] Drivers Serial:bfin_5xx:ttyBFx fails to generate resume from standby
  • [#4647] build samba fails on trunk now for redefinition in fcntl.h
  • [#5526] ip0x board has broken UART defines after resource reorganization
  • [#5527] drivers/media/video/blackfin/blackfin_cam.c build fails in 2.6.31 due to old i2c usage
  • [#5352] bfin_sport.c setup 2D DMA
  • [#5528] fs/binfmt_elf_fdpic.c build fails when CONFIG_ELF_CORE is enabled in 2.6.31
  • [#5464] isram_write() seems to be busted
  • [#5376] mmap05 sometimes can not pass when MPU
  • [#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31
  • [#5361] Microwin (nanox) failed on trunk using AD7897 touch screen
  • [#5544] Sport uart TX stop waiting loop is too long to block RX interrupt in PIO mode when do duplex communication
  • [#5363] spi mmc is not supported in bf533-stamp
  • [#5550] fail to flash ubifs.img to nand
  • [#5470] build xenomai fails for no switchbench
  • [#5437] mathtest fails to compile
  • [#5551] SPI message lost when bus locked
  • [#5370] alsa tool fails to work after wake up from mem in bf537-stamp with ad1836 (can't resolve symbol)
  • [#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04
  • [#5377] amixer fail to run on ad1836 audio driver on BF537-STAMP
  • [#5475] build mkfs.ubifs on trunk head fails
  • [#5562] [ltp]some ltp test case is broken for getipckey and getcwd
  • [#5487] build usb.c fail in testsuites/usbdev/ test at asm/swab.h
  • [#5489] t2/t4 failed in gadget zero bulk test with dma mode
  • [#5567] build nand for bf537 fails on trunk
  • [#5494] Run tftlcd test case in bf548-ezkit, kernel crashed at the end
  • [#4879] traps test case 21 exception 0x3f: l1_instruction_access would make kernel panic on bf533 stamp
  • [#5568] Framebuffer DMA Error!!
  • [#5515] 4 more trap cases fails on bf533
  • [#5379] run scratchpad case sometimes would fail
  • [#5519] pushing Blackfin serial resources to boards broke many boards
  • [#5389] build pictureflow fails at branch head
  • [#5531] Usb SL811 failed on uclinux2009r1-rc6 on bf532 board.
  • [#5523] Blackfin MUSB build fails after update to 2.6.31
  • [#5391] For ad1836 and ad1981b, sometimes sound shakes at the end
  • [#5404] build kernel with 0x2000 as BOOT_LOAD address sometimes would fails at build-busybox-1.13.4
  • [#5469] CPU hardly idles anymore in svn trunk
  • [#5695] Build bf537-stamp fails at ad73322 for the latest trunk
  • [#5702] build xenomai into fdpic format fails for no libnative.so
  • [#5427] ircp failed on bf533-stamp
  • [#5708] Kernel can not boot up when spimmc driver is interrupt drivern in PIO mode
  • [#5711] gfortran case default_format_1.exe fails on 09r1 kernel but pass on trunk head
  • [#5712] I2C client drivers using dev_pm_ops fail to receive suspend/resume callbacks
  • [#5715] libpcap fails to compile in trunk
  • [#5589] STLport build fails
  • [#5724] SPORT driver crash on reload
  • [#5449] bfin_sdh doesn't save and restore peripheral context upon resume
  • [#5580] GPIO pin not reserved for CTS function on SPORT-UART driver
  • [#5521] trunk head build fails at ipc/shm.c
  • [#5636] generic gpio works on bf533 in the opposite way
  • [#5637] Kernel crashed when arecord and aplay on bf537-stamp with SoC I2S audio
  • [#5647] SPI driver bus_unlock() does not schedule postponed SPI messages
  • [#5683] build nand fails for format error
  • [#5689] while two or multi spi devices use gpio cs, spi setup will fail
  • [#5558] bfin mac multi-cast sending fails to work
  • [#5816] PREEMPT_RT: cyclic test stalls in some test mode
  • [#5824] some kernel modules fail to link due to losing strcpy in trunk head
  • [#5707] error in user/procps/Makefile
  • [#5841] [ltp] ltp test case shmctl01/semctl01 can not execute
  • [#5605] Build bf537-stamp fail at bf5xx-i2s.c in latest trunk
  • [#5614] With latest toolchain in trunk, fail to build some apps and libs at fork
  • [#5625] Build microwin app fails in trunk with 4.3 toolchain
  • [#5626] Build lib mad fail at option "-fforce-mem" with gcc 4.3
  • [#5722] bfin_sport_spi broken by cs_gpio changes
  • [#5627] fail to control gpio used by led and button through /sys/class/gpio/
  • [#5927] PR bit other than RAF bit in EMAC OPMODE register should be set for promisuous mode in bfin_mac driver
  • [#5727] build e2fsprogs-1.41.12 fail sometimes because of compiling order
  • [#5631] Build lib confuse failed with gcc 4.3 toolchain
  • [#5759] fix build for pwlib
  • [#5651] Build lirc failed at missing files
  • [#5931] Trying to compile CAN4LINUX for BF537-STAMP board but compilation is failing
  • [#5656] Build iproute2 fails at trunk for dlfcn.h when built as FLAT
  • [#5743] sound/soc/blackfin/bf5xx-ad1938.c build fails after 2.6.32 upgrade
  • [#5801] No interrupt occurs when reconnect gadget device in OTG mode.
  • [#5657] [ltp] ltp test case mount03/umount03 fail with error of "No such device"
  • [#5808] mmc configuration error in make config
  • [#5804] bf531: ethernet not working when switching to 2009R1
  • [#5810] initial sp is given wrong value and INIT_TASK_DATA is not linked into data
  • [#6335] Build xip failed in fdpic format when xenomai is enabled
  • [#7224] undifined variable x25_address in ./user/net-tools/lib/x25_src.c
  • [#5598] bluez-utils has parallel build issues with parser.h
  • [#5668] Fail to build app bluez-utils
  • [#7251] Blackfin SPI driver doesn't handle repeated changes in CPOL, CPHA and LSBF correctly
  • [#5767] In 09r1.1 branch, all ltp test cases show stack overflow in bf561 SMP kernel
  • [#5684] touching keypad on bf548 will make system dead and restart
  • [#7287] Can not build usb.c with libaio
  • [#5687] SPI read/write be wrong after suspend to memory and resume
  • [#7315] [ltp] ltp test case getrusage04 from ltp-full-20120903 fails in trunk
  • [#7328] Fail to compile pthread_test after toolchain update
  • [#5876] Repeating rsh/rcp causes error "poll: protocol failure in circuit setup"
  • [#7329] Fail to compile netperf after toolchain update
  • [#7333] Test dll fails to run after toolchain update
  • [#5741] adau1371 and adau1761 fail to build after 2.6.32 upgrade
  • [#7337] [ltp] ltp test case mount02 fails in ltp-full-20120903
  • [#7338] [ltp] ltp test case mount03 fails in ltp-full-20120903
  • [#5821] Fail to build pngview on regression machines with suse 10.2
  • [#5900] hardware single stepping in userspace does not handle syscalls correctly
  • [#5659] [ltp] ltp test case eventfd01 fail
  • [#7339] [ltp] can not apply patch of lchown02 in ltp-full-20101031 to ltp-full-20120903
  • [#7343] [ltp] LTP test case chdir04 fails in ltp-full-20120903
  • [#7396] build netperf fails for undefined reference to `___CPU_ZERO'
  • [#7483] bfin_sport driver does not work well in TDM DMA mode
  • [#7506] Dropbear does not build
  • [#5757] drop USER_SQUASHFS_MKSQUASHFS7Z as squashfs 4.0 does not support 7z anymore
  • [#5758] fix build for libopenh323
  • [#5833] trap test running on the second core of bf561 has serveral fails
  • [#5755] romfs target fails for lib/pwlib
  • [#5760] fix asterisk build
  • [#5756] romfs target fails for lib/libopenh323
  • [#5877] SPI transmit cs_change flag not properly handled
  • [#5939] bfin-can fails to build after linux-2.6.33 upgrade
  • [#5879] GPIO controlled slave request may fail when bfin_spi_setup() gets executed twice
  • [#5774] [ltp]ltp test case will be killed by oom-killer on bf533-ezkit in 09r1 branch occasionally
  • [#5894] BF527 uImage Flashing issue(Copy to Flash... Flash not Erased)
  • [#5941] links fails in trunk due to using fork()
  • [#5942] build usb host fail when remove anomaly 456 for BF526-EZBRD
  • [#7250] On bfin ppi test, it fails to quit from slave when send "q" from master
  • [#7379] Fail to build alsa lib in latest trunk with upgraded toolchain
  • [#5792] enc28j60 spi net fails to ping with host on trunk head kernel
  • [#4436] BF527-EZKIT unable to receive large files over UART in DMA mode
  • [#4764] Kernel prints warning when booting from jffs2 rootfs in nor flash on bf548-ezkit
  • [#5903] Impossible to work properly with two or more SPI slave devices using spi_bfin5xx driver.
  • [#6386] build iproute2 may fail at ifstat.c sometimes in latest trunk(2010)
  • [#6331] There is error in adau1371 audio testing on bf527-ezkit(2010)
  • [#5933] BF561-EZKIT SMP kernel can not wake up from standby mode by uart interrupt
  • [#4713] dmacopy tries to test L2 on BF537
  • [#6564] dmacopy test on bf561-ezkit failed at sram_alloc in L1(2011)
  • [#4997] ppitest fails for bfin_ppi driver on bf537
  • [#5940] lynx fails in trunk due to using fork()
  • [#4104] Format usbdisk failed with mke2fs in trunk
  • [#6578] iccutils build fails at scalar.c(2011)
  • [#3883] ftp server crash after connetion or chdir with MidnightCommander4.6.1
  • [#4697] kernel crash on bf533-stamp/bf533-ezkit after config IP for ethernet port
  • [#4050] xip test case failed in BF548-EZKIT
  • [#3991] mmc_spi not working out of the box.
  • [#3996] dhcpcd not stable on BF548-EZKIT
  • [#5136] Linphone: Can't hear each other and "Data access misaligned address violation"
  • [#5214] trunk applications don't build with trunk toolchain due to missing fork()
  • [#4055] top (busybox) crashs
  • [#5162] Linphone: Data access misaligned address
  • [#4992] bfin_sdh fails to build for BF514/BF516
  • [#5570] reboot on bf527-ezkit with nand and ubifs enabled fails
  • [#4955] 548 SDH: netperf, iperf triggers libertas error
  • [#5522] Lib DirectFB-1.4.0 crashes when run DirectFB demo on SVN trunk
  • [#3882] copy file function cp, after few times consume all memory
  • [#4773] BF527 usb-ide hard disk error

[#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31

[#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31

Submitted By: Barry Song

Open Date

2009-09-14 05:28:21     Close Date

2009-09-24 23:49:45

Priority:

Medium     Assignee:

Nobody

Status:

Closed     Fixed In Release:

N/A

Found In Release:

2010R1     Release:

Category:

N/A     Board:

N/A

Processor:

BF537     Silicon Revision:

Is this bug repeatable?:

Yes     Resolution:

Assigned (Not Start)

Uboot version or rev.:

    Toolchain version or rev.:

09r1-rc9

App binary format:

N/A     

Summary: run aplay/arecord will make system panic after kernel upgraded to 2.6.31

Details:

After kernel upgrade to 2.6.31, run aplay or arecord will make system panic:

aplay:

Playing raw data  : Unsigned 8 bit, Rate 8000 Hz, Mono

------------[ cut here ]------------

kernel BUG at mm/nommu.c:550!

Kernel panic - not syncing: BUG()

Hardware Trace:

   0 Target : <0x00004dc0> { _trap_c + 0x0 }

     Source : <0xffa0069c> { _exception_to_level5 + 0xa4 } CALL pcrel

   1 Target : <0xffa005f8> { _exception_to_level5 + 0x0 }

     Source : <0xffa004ac> { _bfin_return_from_exception + 0x20 } RTX

   2 Target : <0xffa0048c> { _bfin_return_from_exception + 0x0 }

     Source : <0xffa00550> { _ex_trap_c + 0x74 } JUMP.S

   3 Target : <0xffa004dc> { _ex_trap_c + 0x0 }

     Source : <0xffa00770> { _trap + 0x68 } JUMP (P4)

   4 Target : <0xffa00728> { _trap + 0x20 }

     Source : <0xffa00724> { _trap + 0x1c } IF !CC JUMP

   5 Target : <0xffa00708> { _trap + 0x0 }

     Source : <0x0003f332> { _add_nommu_region + 0x5a } IF !CC JUMP

   6 Target : <0x0003f330> { _add_nommu_region + 0x58 }

     Source : <0x0003f326> { _add_nommu_region + 0x4e } IF !CC JUMP

   7 Target : <0x0003f324> { _add_nommu_region + 0x4c }

     Source : <0x0003f2fa> { _add_nommu_region + 0x22 } IF CC JUMP

   8 Target : <0x0003f2f3> { _add_nommu_region + 0x1b }

     Source : <0x0003f306> { _add_nommu_region + 0x2e } IF CC JUMP

   9 Target : <0x0003f2d8> { _add_nommu_region + 0x0 }

     Source : <0x000402ac> { _do_mmap_pgoff + 0x344 } CALL pcrel

  10 Target : <0x0004028c> { _do_mmap_pgoff + 0x324 }

     Source : <0x000798b4> { _ramfs_nommu_get_unmapped_area + 0x5c } RTS

  11 Target : <0x000798ac> { _ramfs_nommu_get_unmapped_area + 0x54 }

     Source : <0x00079870> { _ramfs_nommu_get_unmapped_area + 0x18 } IF !CC JUMP

  12 Target : <0x00079858> { _ramfs_nommu_get_unmapped_area + 0x0 }

     Source : <0x0004028a> { _do_mmap_pgoff + 0x322 } CALL (P2)

  13 Target : <0x00040268> { _do_mmap_pgoff + 0x300 }

     Source : <0x00040124> { _do_mmap_pgoff + 0x1bc } IF !CC JUMP

  14 Target : <0x00040120> { _do_mmap_pgoff + 0x1b8 }

     Source : <0x00093098> { _rb_next + 0x3c } RTS

  15 Target : <0x00093094> { _rb_next + 0x38 }

     Source : <0x000930b0> { _rb_next + 0x54 } JUMP.S

Stack info:

SP: [0x02fbbca8] <0x02fbbca8> /* kernel dynamic memory */

FP: (0x02fbbcac)

Memory from 0x02fbbca0 to 02fbc000

02fbbca0: 02fbbca8  ffe02014 [0000003f](02fbbcd0)<00010e28> 0016bd9c  0013a76c  001693d2

02fbbcc0: 001693d2  001697d2  02fbbcec  02fbbcec (02fbbd74)<00005146> 02fbbd9c  ffe02014

02fbbce0: 0000003f  00008008  02337bd4  0000003f  ffffffff  020ba010  02fbbe28  02fbbd1c

02fbbd00:<0004a7fe> 02099754  02fbbe28  02fbbd50  02fbbd30  02fbbd2c <00051658> 02fbbd50

02fbbd20:<0004bc30> 020ba010  02010178  02fbbd6c <0004bfe4> 0209b658  02fbbd50  00000000

02fbbd40: 00000000  00000000  00000000  02fbbd64 <00055958> 00000000  00000000  00000000

02fbbd60: 00000000  02fbbd84 <0004a51c> 0200d7a0  00000000 (02fbbe84)<ffa006a0> 00166000

02fbbd80: 00008008  00000021  02ef9de4  00000002  02fbbdb0 <0004a51c> 00000480  00000480

02fbbda0: 00008008  00000021  00000000  02fbbe78  00000480  0003f334 <000402b0> 00000000

02fbbdc0: 02003005  02f9d6b7  ffa0175c  02f9d6b6  ffa0175c  00000000  00000000  00000000

02fbbde0: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02fbbe00: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02fbbe20: 00000000  00000000  02fb6678  00e3f1f0  02fbbe84  00000001  02bbf0c0  0000003f

02fbbe40: 02ef9704  02ef9e3c  02ef9de4  00000001  00000000  02ef9de4  00000002  00000621

02fbbe60: 00000621  00000000  00000000  00000000  02ef9de4  00000006 <0004028c> 00000001

02fbbe80: 00000001 (02fbbeb0)<000402b0><ffa02c96> 00000000  00000621  00000000  00000002

02fbbea0: 00000000  02fbbeac  02f1a4ec  000000ff (02fbbeec)<00003a9c> 00000000  00000621

02fbbec0: 01034188  02fba000  00000002  02bbf0c0  00000001  00042998  00000005  00000621

02fbbee0: 00000001  00000002  00000000 (00000000)<ffa008a8> 00003a58  000000c0  00000000

02fbbf00: ffffe000  00000000  00000005  ffffe000  011be2a8  0000fffe  00000002  00000005

02fbbf20: 00000000  02f11862  00008000  00000000  00000000  02fbc000  02f11862  02f11862

02fbbf40:<011fcdf0><ffa01046> 02001004  02f9d6b7  02f9f92f  02f9d6b6  02f9f91c  00000000

02fbbf60: fffffffd  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02fbbf80: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02fbbfa0: 00000000  00000000  00000000  00000000  02fb6678  00e3f1f0  00e3f248  01034420

02fbbfc0: 00000000  01034188  0128b05b  02f16380  000000c0  00000005  01034424  00000000

02fbbfe0: 00000005  00000002  00000001  00000621  00000000  00000000  000000c0  00000006

Return addresses in stack:

   frame  1 : <0x00010e28> { _panic + 0x4c }

   frame  2 : <0x00005146> { _trap_c + 0x386 }

    address : <0x0004a7fe> { _do_lookup + 0x46 }

    address : <0x00051658> { _dput + 0x64 }

    address : <0x0004bc30> { ___link_path_walk + 0x220 }

    address : <0x0004bfe4> { ___link_path_walk + 0x5d4 }

    address : <0x00055958> { _mntput_no_expire + 0x1c }

    address : <0x0004a51c> { _path_put + 0x20 }

   frame  3 : <0xffa006a0> { _exception_to_level5 + 0xa8 }

    address : <0x0004a51c> { _path_put + 0x20 }

    address : <0x000402b0> { _do_mmap_pgoff + 0x348 }

    address : <0x0004028c> { _do_mmap_pgoff + 0x324 }

   frame  4 : <0x000402b0> { _do_mmap_pgoff + 0x348 }

    address : <0xffa02c96> { ___down_write + 0xa }

   frame  5 : <0x00003a9c> { _sys_mmap2 + 0x44 }

   frame  6 : <0xffa008a8> { _system_call + 0x68 }

    address : <0x011fcdf0> [ /lib/libdl.so.0 + 0xdf0 ]

    address : <0xffa01046> { _evt_system_call + 0x66 }

arecord:

Recording WAVE 'wav' : Unsigned 8 bit, Rate 8000 Hz, Mono

------------[ cut here ]------------

kernel BUG at mm/nommu.c:550!

Kernel panic - not syncing: BUG()

Hardware Trace:

   0 Target : <0x00004dc0> { _trap_c + 0x0 }

     Source : <0xffa0069c> { _exception_to_level5 + 0xa4 } CALL pcrel

   1 Target : <0xffa005f8> { _exception_to_level5 + 0x0 }

     Source : <0xffa004ac> { _bfin_return_from_exception + 0x20 } RTX

   2 Target : <0xffa0048c> { _bfin_return_from_exception + 0x0 }

     Source : <0xffa00550> { _ex_trap_c + 0x74 } JUMP.S

   3 Target : <0xffa004dc> { _ex_trap_c + 0x0 }

     Source : <0xffa00770> { _trap + 0x68 } JUMP (P4)

   4 Target : <0xffa00728> { _trap + 0x20 }

     Source : <0xffa00724> { _trap + 0x1c } IF !CC JUMP

   5 Target : <0xffa00708> { _trap + 0x0 }

     Source : <0x0003f332> { _add_nommu_region + 0x5a } IF !CC JUMP

   6 Target : <0x0003f330> { _add_nommu_region + 0x58 }

     Source : <0x0003f326> { _add_nommu_region + 0x4e } IF !CC JUMP

   7 Target : <0x0003f324> { _add_nommu_region + 0x4c }

     Source : <0x0003f2fa> { _add_nommu_region + 0x22 } IF CC JUMP

   8 Target : <0x0003f2f3> { _add_nommu_region + 0x1b }

     Source : <0x0003f306> { _add_nommu_region + 0x2e } IF CC JUMP

   9 Target : <0x0003f2d8> { _add_nommu_region + 0x0 }

     Source : <0x000402ac> { _do_mmap_pgoff + 0x344 } CALL pcrel

  10 Target : <0x0004028c> { _do_mmap_pgoff + 0x324 }

     Source : <0x000798b4> { _ramfs_nommu_get_unmapped_area + 0x5c } RTS

  11 Target : <0x000798ac> { _ramfs_nommu_get_unmapped_area + 0x54 }

     Source : <0x00079870> { _ramfs_nommu_get_unmapped_area + 0x18 } IF !CC JUMP

  12 Target : <0x00079858> { _ramfs_nommu_get_unmapped_area + 0x0 }

     Source : <0x0004028a> { _do_mmap_pgoff + 0x322 } CALL (P2)

  13 Target : <0x00040268> { _do_mmap_pgoff + 0x300 }

     Source : <0x00040124> { _do_mmap_pgoff + 0x1bc } IF !CC JUMP

  14 Target : <0x00040120> { _do_mmap_pgoff + 0x1b8 }

     Source : <0x00093098> { _rb_next + 0x3c } RTS

  15 Target : <0x00093094> { _rb_next + 0x38 }

     Source : <0x000930b0> { _rb_next + 0x54 } JUMP.S

Stack info:

SP: [0x00f57ca8] <0x00f57ca8> /* kernel dynamic memory */

FP: (0x00f57cac)

Memory from 0x00f57ca0 to 00f58000

00f57ca0: 00f57ca8  ffe02014 [0000003f](00f57cd0)<00010e28> 00167d9c  0013a76c  001693d2

00f57cc0: 001693d2  001697d2  00f57cec  00f57cec (00f57d74)<00005146> 00f57d9c  ffe02014

00f57ce0: 0000003f  00008008  02c3f094  0000003f  ffffffff  0209d010  00f57e28  00f57d1c

00f57d00:<0004a7fe> 0209a754  00f57e28  00f57d50  00f57d30  00f57d2c <00051658> 00f57d50

00f57d20:<0004bc30> 0209d010  02010178  00f57d6c <0004bfe4> 0209c658  00f57d50  00000000

00f57d40: 00000000  00000000  00000000  00f57d64 <00055958> 00000000  00000000  00000000

00f57d60: 00000000  00f57d84 <0004a51c> 0200d7a0  00000000 (00f57e84)<ffa006a0> 00166000

00f57d80: 00008008  00002021  02059664  00000002  00f57db0 <0004a51c> 00000480  00000480

00f57da0: 00008008  00002021  00000000  00f57e78  00000480  0003f334 <000402b0> 00000000

00f57dc0: 02003005  02f9d6b7  ffa0175c  02f9d6b6  ffa0175c  00000000  00000000  00000000

00f57de0: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

00f57e00: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

00f57e20: 00000000  00000000  02fb6678  00e1d23c  00f57e84  00000001  02bbfcc0  0000003f

00f57e40: 02059d6c  02059dc4  02059664  00000001  00000000  02059664  00000002  00000621

00f57e60: 00000621  00000000  00000000  00000000  02059664  00000006 <0004028c> 00000001

00f57e80: 00000001 (00f57eb0)<000402b0><ffa02c96> 00000000  00000621  00000000  00000002

00f57ea0: 00000000  00f57eac  02f1c4ec  000000ff (00f57eec)<00003a9c> 00000000  00000621

00f57ec0: 0104e188  00f56000  00000002  02bbfcc0  00000001  00042998  00000005  00000621

00f57ee0: 00000001  00000002  00000000 (00000000)<ffa008a8> 00003a58  000000c0  00000000

00f57f00: ffffe000  00000000  00000003  ffc00014  00000000 <ffa00bf4> 00000002  00000003

00f57f20: 00000000  02ef9862  00008000  00002000  00000000  00f58000  02ef9862  02ef9862

00f57f40:<011acdf0><ffa01046> 02001004  02f9d6b7  02f9f92f  02f9d6b6  02f9f91c  00000000

00f57f60: fffffffd  00000000  00000000  00000000  00000000  00000000  00000000  00000000

00f57f80: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

00f57fa0: 00000000  00000000  00000000  00000000  02fb6678  00e1d23c  00e1d294  0104e420

00f57fc0: 00000000  0104e188  0118b05b  02efe380  000000c0  00000003  0104e424  00000000

00f57fe0: 00000003  00000002  00000001  00000621  00000000  00000000  000000c0  00000006

Return addresses in stack:

   frame  1 : <0x00010e28> { _panic + 0x4c }

   frame  2 : <0x00005146> { _trap_c + 0x386 }

    address : <0x0004a7fe> { _do_lookup + 0x46 }

    address : <0x00051658> { _dput + 0x64 }

    address : <0x0004bc30> { ___link_path_walk + 0x220 }

    address : <0x0004bfe4> { ___link_path_walk + 0x5d4 }

    address : <0x00055958> { _mntput_no_expire + 0x1c }

    address : <0x0004a51c> { _path_put + 0x20 }

   frame  3 : <0xffa006a0> { _exception_to_level5 + 0xa8 }

    address : <0x0004a51c> { _path_put + 0x20 }

    address : <0x000402b0> { _do_mmap_pgoff + 0x348 }

    address : <0x0004028c> { _do_mmap_pgoff + 0x324 }

   frame  4 : <0x000402b0> { _do_mmap_pgoff + 0x348 }

    address : <0xffa02c96> { ___down_write + 0xa }

   frame  5 : <0x00003a9c> { _sys_mmap2 + 0x44 }

   frame  6 : <0xffa008a8> { _system_call + 0x68 }

    address : <0xffa00bf4> { __common_int_entry + 0x74 }

    address : <0x011acdf0> [ /lib/libdl.so.0 + 0xdf0 ]

    address : <0xffa01046> { _evt_system_call + 0x66 }

Tested on ad1938/ad1836/ad1980, all crash.

Follow-ups

--- Vivi Li                                                  2009-09-24 23:49:44

[Linux-kernel-commits] [7449] trunk/mm/nommu.c: for bug [#5446], the new

vm_region codes break some mmap

Revision 7449

Author gyang

Date 2009-09-24 07:15:00 -0400 (Thu, 24 Sep 2009)

Fixed also this bug.

So close it.

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

File Name     File Type     File Size     Posted By

No Files Were Found

  • Share
  • History
  • More
  • Cancel
analog-devices logo

About Analog Devices

  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue

Get the Latest News

Stay up to date with our latest news and articles about Analog Devices' products, design tools, trainings, and events.

Sign Up Now
  • Instagram page
  • Twitter page
  • Linkedin page
  • Youtube page
  • Facebook
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings
沪ICP备09046653号-1

©2024 Analog Devices, Inc. All Rights Reserved

analog-devices

About Analog Devices

Down Up
  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

Down Up
  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue

Get the Latest News

Stay up to date with our latest news and articles about Analog Devices' products, design tools, trainings, and events.

Instagram page Facebook Twitter page Linkedin page Youtube page
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings
沪ICP备09046653号-1

©2024 Analog Devices, Inc. All Rights Reserved