Locale Icon
English
  • Forums

    Popular Forums

    • LTspice
    • RF and Microwave
    • Video
    • Power Management
    • Precision ADCs
    • FPGA Reference Designs
    • Linux Software Drivers

    Product Forums

    • Amplifiers
    • Microcontrollers
    • Clock and Timing
    • Data Converters
    • Direct Digital Synthesis (DDS)
    • Energy Monitoring and Metering
    • Interface and Isolation
    • MEMS Inertial Sensors
    • Power Management
    • Processors and DSP
    • Switches/Multiplexers
    • Temperature Sensors
    • Voltage References
    View All

    Application Forums

    • A2B
    • Audio
    • Automated Test Equipment (ATE)
    • Condition-Based Monitoring
    • Depth, Perception & Ranging Technologies
    • Embedded Vision Sensing Library
    • Motor Control Hardware Platforms
    • Precision Technology Signal Chains Library
    • Video
    • Wireless Sensor Networks Reference Library

    Design Center Forums

    • ACE Evaluation Software
    • ADEF System Platforms
    • Design Tools and Calculators
    • FPGA Reference Designs
    • Linux Software Drivers
    • Microcontroller no-OS Drivers
    • Power Studio Designer
    • Power Studio Planner
    • Reference Designs
    • Robot Operating System (ROS) SDK
    • Signal Chain Power (SCP)
    • Software Interface Tools
    • System Demonstration Platform (SDP) Support
  • Learn

    Highlighted Webinar

    Maximize Workflow: Analog Devices eShop New Upload Tools

    Join us for an exciting webinar where we will unveil and demonstrate our new bulk ordering and bulk quoting tools! Discover how you can streamline your...

    Places

    • ADI Academy
    • ADI Webinars
    • Video Annex
    • Virtual Classroom

    Libraries

    • 3D ToF Depth Sensing Library
    • Continuous-Wave CMOS Time of Flight (TOF) Library
    • Embedded Vision Sensing Library
    • Gigabit Multimedia Serial Link (GMSL) Library
    • Optical Sensing Library
    • Precision Technology Signal Chains Library
    • Software Modules and SDKs Library
    • Supervisory Circuits Library
    • Wireless Sensor Networks Library

    Latest Webinars

    • Power Management Fundamentals II Session 6: Key Layout Considerations for Power
    • Power Management Fundamentals II Session 5: Deeper Look into Power Protection
    • Power Management Fundamentals II Session 4: Isolated Converters Explained
    • A 16T/16R X-Band Direct Sampling Phased Array Subsystem using Apollo MxFE
    • Designing for Silence: EMC Testing and Reduction for Digital Isolators and DC-DC Converters
    View All Webinars
  • Community Hub

    Challenge Yourself!

      KCC's Quiz AQQ293 about finding the cat

      1. First, the quote of the week: " The best measure of a man's honesty isn't his income tax return. It's the zero adjust on his bathroom scale " - Unknown...

    View All

    What's Brewing

      Read a Blog, Take this Quiz for Another Chance to Win a Gift Card!

      Important: Read the blog first . The quiz questions are all based on the content from the blog: White Coats and Multi-Coloured Pens Ready to put...

    View All

    Places

    • Community Help
    • Logic Lounge
    • Super User Program
    • Analog Dialogue Quiz

    Resources

    • EZ Code of Conduct
    • EZ How To Help Articles
    • Getting Started Guide
    • ADI: Words Matter
    • Community Help Videos
    View All
  • Blogs

    Highlighted Blogs

    Powering the Future: Multiphase Buck-Boost Innovation for Telecom: Part 3 of 3

    How can we meet the growing power requirements of the future? 5G network deployments necessitate high-efficiency power conversion solutions capable of...

     

    Freedom from Interference: Control of Mixed ASIL Criticalities

    Interference, within the context of Functional Safety, refers to a situation in which a failure in a component of a system may propagate to other components...

    Latest Blogs

    • High-Tech Pro and Crafty Creator: Meet Iulia, Our Inspiring Super User!
    • Apples and Oranges: A Comparative Study of DCM and CCM: Part 6 of 6
    • Understanding AXI-Stream Interfaces for DSP Data Pipelines
    • Importing Op Amp Models in LTspice: When All Else Fails, Customize the Symbol: Part 3 of 3
    • Inside the Bits: Digging Deeper with Part-Specific Register Examples
    Read All Blogs

    ADI Blogs

    • EZ Spotlight
    • The Engineering Mind
  • ContentZone

    Visit ContentZone

    ContentZone

    Technical articles. Blogs. Videos. Your ADI content, all in one place.

    View ContentZone

    Featured Content

    Featured Content Title

    Blurb About Content

    View Content By Industry

    • Aerospace and Defense Systems
    • Automotive Solutions
    • Consumer Technology Solutions
    • Data Center Solutions
    • Energy Solutions
    • Healthcare Solutions
    • Industrial Automation Technology Solutions
    • Instrumentation and Measurement Solutions
    • Intelligent Building Solutions
    • Wireless Communication Solutions

    View Content By Technology

    • A2B Audio Bus
    • ADI OtoSense Predictive Maintenance Solutions
    • Dynamic Speaker Management
    • Gallium Nitride (GaN) Technology
    • Gigabit Multimedia Serial Link (GMSL)
    • Industrial Vision
    • Power Solutions
    • Precision Technology
    • RF
    • Sensor Interfaces
    • SmartMesh
EngineerZone
EngineerZone
Linux Bug Archive
  • Log In
  • User
  • Site
  • Search
OR
Ask a Question
Linux Bug Archive
  • Processors and DSP
  • Software and Development Tools
  • Linux Distribution for Blackfin
  • Linux Bug Archive
  • Cancel
Linux Bug Archive
Documents [#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04
  • Q&A
  • Documents
  • Members
  • Tags
  • Cancel
  • +Documents
  • +ad1836: FAQ
  • +ad1938: FAQ
  • +ad1939: FAQ
  • +AD5280: FAQ
  • +ad73311: FAQ
  • +adau1361: FAQ
  • +adau1371: FAQ
  • +adau1373: FAQ
  • +adau1761: FAQ
  • +adp5588-gpio: FAQ
  • +adv7393: FAQ
  • +ADXL34x: FAQ
  • +bf518-ezbrd: FAQ
  • +bf518: FAQ
  • +bf51x: FAQ
  • +bf526-ezbrd: FAQ
  • +bf527-ezkit: FAQ
  • +bf533-stamp/ezkit: FAQ
  • +bf533: FAQ
  • +bf538-ezkit: FAQ
  • +bf548-ezkit: FAQ
  • +BF54x: FAQ
  • +bf561-ezkit: FAQ
  • +bf5xx: FAQ
  • +bfin-mac driver: FAQ
  • +bfin-uclinux-gdb: FAQ
  • +bfin_can.c: FAQ
  • +Blackfin: FAQ
  • +bluetooth: FAQ
  • +Build kernel: FAQ
  • +Build: FAQ
  • +cfcard test: FAQ
  • [#6170] section mismatches in cifs code(2010)
  • [#6173] linphone testing problem(2010)
  • [#6190] BF561-EZKIT SMP kernel can not wake up by uart(2010)
  • [#6194] libxenomai.so.0 can't be found in xenomai kernel with fdpic mode(2010)
  • [#6207] Build error in CTS/RTS testing on board BF548-EZKIT(2010)
  • [#6251] pread/pwrite arent decoded correctly by strace(2010)
  • [#6253] strace build failed in trunk with outdated toolchain (missing asm/cachectl.h)(2010)
  • [#6255] Busybox inetd crashes/rsh noconnet/ssh(2010)
  • [#6265] libpng build fails due to not finding zlib(2010)
  • [#6271] "nand unlock" is an unsupported command in u-boot update in nand flash(2010)
  • [#6272] After update u-boot in spi flash, BF548-EZKIT can not boot from spi flash(2010)
  • +gadget fs bulk: FAQ
  • +gadget zero bulk: FAQ
  • +gadget zero control: FAQ
  • +Kernel xip: FAQ
  • +ltp test: FAQ
  • +microwin test: FAQ
  • +MPU kernel: FAQ
  • +Sl811-hcd.c USB: FAQ
  • +SPORT channel: FAQ
  • +trunk head kernel: FAQ
  • +usb otg driver: FAQ
  • +zlib: FAQ
  • +Illegal i2c: FAQ
  • +isp1362-hcd: FAQ
  • +Kernel: FAQ
  • +KGDBOE: FAQ
  • [#4646] Varittronix LCD driver mixes blue and Red
  • +serial driver: FAQ
  • +sigma firmware: FAQ
  • +spi transaction: FAQ
  • +strace FAQ
  • [#4787] [ltp] LTP test case shmctl01 failed in trunk for ltp-full-20081130
  • +tiff-4.0.0beta4: FAQ
  • [#5264] ping packet size test will fail for gadget ethernet test with DMA mode
  • +USBHOST: FAQ
  • +USB_EP_NI7_RXINTERVAL: FAQ
  • [#5257] Build usb gadget driver with DMA mode will fail
  • [#4708] Blackfin irda build fails for bf533-stamp
  • [#4735] unaligned accesses in qt webkit
  • [#5168] build cpufrequtils into fdpic format has error
  • [#5321] modprobe i2c lcd on bf533 stamp wait long time
  • [#4922] unwanted sound comes up after g_audio module is installed on BF548 and BF527
  • [#5176] app cpufrequtils in Blackfin app programs fails to build in FDPIC
  • [#5237] musb driver is broken after linux-2.6.30 update
  • [#5255] ping target board sometimes get wrong data byte for gadget ethernet pio mode
  • [#5336] canbus and ppifcd drivers can not be built on BF538-EZKIT
  • [#6614] Kernel panic frequently when test sdio mmc on bf518-ezbrd(2011)
  • +SPI driver: FAQ
  • [#4714] the first time to build mtd-utils will fail in trunk
  • [#5524] drivers/video/bfin_adv7393fb.c build fails in 2.6.31 due to old i2c usage
  • [#5525] drivers/video/bf537-lq035.c build fails in 2.6.31 due to old i2c usage
  • [#5399] no sound when record in board and listen in PC for linphone test of ad1836 on bf533-stamp
  • [#5458] Drivers Serial:bfin_5xx:ttyBFx fails to generate resume from standby
  • [#4647] build samba fails on trunk now for redefinition in fcntl.h
  • [#5526] ip0x board has broken UART defines after resource reorganization
  • [#5527] drivers/media/video/blackfin/blackfin_cam.c build fails in 2.6.31 due to old i2c usage
  • [#5352] bfin_sport.c setup 2D DMA
  • [#5528] fs/binfmt_elf_fdpic.c build fails when CONFIG_ELF_CORE is enabled in 2.6.31
  • [#5464] isram_write() seems to be busted
  • [#5376] mmap05 sometimes can not pass when MPU
  • [#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31
  • [#5361] Microwin (nanox) failed on trunk using AD7897 touch screen
  • [#5544] Sport uart TX stop waiting loop is too long to block RX interrupt in PIO mode when do duplex communication
  • [#5363] spi mmc is not supported in bf533-stamp
  • [#5550] fail to flash ubifs.img to nand
  • [#5470] build xenomai fails for no switchbench
  • [#5437] mathtest fails to compile
  • [#5551] SPI message lost when bus locked
  • [#5370] alsa tool fails to work after wake up from mem in bf537-stamp with ad1836 (can't resolve symbol)
  • [#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04
  • [#5377] amixer fail to run on ad1836 audio driver on BF537-STAMP
  • [#5475] build mkfs.ubifs on trunk head fails
  • [#5562] [ltp]some ltp test case is broken for getipckey and getcwd
  • [#5487] build usb.c fail in testsuites/usbdev/ test at asm/swab.h
  • [#5489] t2/t4 failed in gadget zero bulk test with dma mode
  • [#5567] build nand for bf537 fails on trunk
  • [#5494] Run tftlcd test case in bf548-ezkit, kernel crashed at the end
  • [#4879] traps test case 21 exception 0x3f: l1_instruction_access would make kernel panic on bf533 stamp
  • [#5568] Framebuffer DMA Error!!
  • [#5515] 4 more trap cases fails on bf533
  • [#5379] run scratchpad case sometimes would fail
  • [#5519] pushing Blackfin serial resources to boards broke many boards
  • [#5389] build pictureflow fails at branch head
  • [#5531] Usb SL811 failed on uclinux2009r1-rc6 on bf532 board.
  • [#5523] Blackfin MUSB build fails after update to 2.6.31
  • [#5391] For ad1836 and ad1981b, sometimes sound shakes at the end
  • [#5404] build kernel with 0x2000 as BOOT_LOAD address sometimes would fails at build-busybox-1.13.4
  • [#5469] CPU hardly idles anymore in svn trunk
  • [#5695] Build bf537-stamp fails at ad73322 for the latest trunk
  • [#5702] build xenomai into fdpic format fails for no libnative.so
  • [#5427] ircp failed on bf533-stamp
  • [#5708] Kernel can not boot up when spimmc driver is interrupt drivern in PIO mode
  • [#5711] gfortran case default_format_1.exe fails on 09r1 kernel but pass on trunk head
  • [#5712] I2C client drivers using dev_pm_ops fail to receive suspend/resume callbacks
  • [#5715] libpcap fails to compile in trunk
  • [#5589] STLport build fails
  • [#5724] SPORT driver crash on reload
  • [#5449] bfin_sdh doesn't save and restore peripheral context upon resume
  • [#5580] GPIO pin not reserved for CTS function on SPORT-UART driver
  • [#5521] trunk head build fails at ipc/shm.c
  • [#5636] generic gpio works on bf533 in the opposite way
  • [#5637] Kernel crashed when arecord and aplay on bf537-stamp with SoC I2S audio
  • [#5647] SPI driver bus_unlock() does not schedule postponed SPI messages
  • [#5683] build nand fails for format error
  • [#5689] while two or multi spi devices use gpio cs, spi setup will fail
  • [#5558] bfin mac multi-cast sending fails to work
  • [#5816] PREEMPT_RT: cyclic test stalls in some test mode
  • [#5824] some kernel modules fail to link due to losing strcpy in trunk head
  • [#5707] error in user/procps/Makefile
  • [#5841] [ltp] ltp test case shmctl01/semctl01 can not execute
  • [#5605] Build bf537-stamp fail at bf5xx-i2s.c in latest trunk
  • [#5614] With latest toolchain in trunk, fail to build some apps and libs at fork
  • [#5625] Build microwin app fails in trunk with 4.3 toolchain
  • [#5626] Build lib mad fail at option "-fforce-mem" with gcc 4.3
  • [#5722] bfin_sport_spi broken by cs_gpio changes
  • [#5627] fail to control gpio used by led and button through /sys/class/gpio/
  • [#5927] PR bit other than RAF bit in EMAC OPMODE register should be set for promisuous mode in bfin_mac driver
  • [#5727] build e2fsprogs-1.41.12 fail sometimes because of compiling order
  • [#5631] Build lib confuse failed with gcc 4.3 toolchain
  • [#5759] fix build for pwlib
  • [#5651] Build lirc failed at missing files
  • [#5931] Trying to compile CAN4LINUX for BF537-STAMP board but compilation is failing
  • [#5656] Build iproute2 fails at trunk for dlfcn.h when built as FLAT
  • [#5743] sound/soc/blackfin/bf5xx-ad1938.c build fails after 2.6.32 upgrade
  • [#5801] No interrupt occurs when reconnect gadget device in OTG mode.
  • [#5657] [ltp] ltp test case mount03/umount03 fail with error of "No such device"
  • [#5808] mmc configuration error in make config
  • [#5804] bf531: ethernet not working when switching to 2009R1
  • [#5810] initial sp is given wrong value and INIT_TASK_DATA is not linked into data
  • [#6335] Build xip failed in fdpic format when xenomai is enabled
  • [#7224] undifined variable x25_address in ./user/net-tools/lib/x25_src.c
  • [#5598] bluez-utils has parallel build issues with parser.h
  • [#5668] Fail to build app bluez-utils
  • [#7251] Blackfin SPI driver doesn't handle repeated changes in CPOL, CPHA and LSBF correctly
  • [#5767] In 09r1.1 branch, all ltp test cases show stack overflow in bf561 SMP kernel
  • [#5684] touching keypad on bf548 will make system dead and restart
  • [#7287] Can not build usb.c with libaio
  • [#5687] SPI read/write be wrong after suspend to memory and resume
  • [#7315] [ltp] ltp test case getrusage04 from ltp-full-20120903 fails in trunk
  • [#7328] Fail to compile pthread_test after toolchain update
  • [#5876] Repeating rsh/rcp causes error "poll: protocol failure in circuit setup"
  • [#7329] Fail to compile netperf after toolchain update
  • [#7333] Test dll fails to run after toolchain update
  • [#5741] adau1371 and adau1761 fail to build after 2.6.32 upgrade
  • [#7337] [ltp] ltp test case mount02 fails in ltp-full-20120903
  • [#7338] [ltp] ltp test case mount03 fails in ltp-full-20120903
  • [#5821] Fail to build pngview on regression machines with suse 10.2
  • [#5900] hardware single stepping in userspace does not handle syscalls correctly
  • [#5659] [ltp] ltp test case eventfd01 fail
  • [#7339] [ltp] can not apply patch of lchown02 in ltp-full-20101031 to ltp-full-20120903
  • [#7343] [ltp] LTP test case chdir04 fails in ltp-full-20120903
  • [#7396] build netperf fails for undefined reference to `___CPU_ZERO'
  • [#7483] bfin_sport driver does not work well in TDM DMA mode
  • [#7506] Dropbear does not build
  • [#5757] drop USER_SQUASHFS_MKSQUASHFS7Z as squashfs 4.0 does not support 7z anymore
  • [#5758] fix build for libopenh323
  • [#5833] trap test running on the second core of bf561 has serveral fails
  • [#5755] romfs target fails for lib/pwlib
  • [#5760] fix asterisk build
  • [#5756] romfs target fails for lib/libopenh323
  • [#5877] SPI transmit cs_change flag not properly handled
  • [#5939] bfin-can fails to build after linux-2.6.33 upgrade
  • [#5879] GPIO controlled slave request may fail when bfin_spi_setup() gets executed twice
  • [#5774] [ltp]ltp test case will be killed by oom-killer on bf533-ezkit in 09r1 branch occasionally
  • [#5894] BF527 uImage Flashing issue(Copy to Flash... Flash not Erased)
  • [#5941] links fails in trunk due to using fork()
  • [#5942] build usb host fail when remove anomaly 456 for BF526-EZBRD
  • [#7250] On bfin ppi test, it fails to quit from slave when send "q" from master
  • [#7379] Fail to build alsa lib in latest trunk with upgraded toolchain
  • [#5792] enc28j60 spi net fails to ping with host on trunk head kernel
  • [#4436] BF527-EZKIT unable to receive large files over UART in DMA mode
  • [#4764] Kernel prints warning when booting from jffs2 rootfs in nor flash on bf548-ezkit
  • [#5903] Impossible to work properly with two or more SPI slave devices using spi_bfin5xx driver.
  • [#6386] build iproute2 may fail at ifstat.c sometimes in latest trunk(2010)
  • [#6331] There is error in adau1371 audio testing on bf527-ezkit(2010)
  • [#5933] BF561-EZKIT SMP kernel can not wake up from standby mode by uart interrupt
  • [#4713] dmacopy tries to test L2 on BF537
  • [#6564] dmacopy test on bf561-ezkit failed at sram_alloc in L1(2011)
  • [#4997] ppitest fails for bfin_ppi driver on bf537
  • [#5940] lynx fails in trunk due to using fork()
  • [#4104] Format usbdisk failed with mke2fs in trunk
  • [#6578] iccutils build fails at scalar.c(2011)
  • [#3883] ftp server crash after connetion or chdir with MidnightCommander4.6.1
  • [#4697] kernel crash on bf533-stamp/bf533-ezkit after config IP for ethernet port
  • [#4050] xip test case failed in BF548-EZKIT
  • [#3991] mmc_spi not working out of the box.
  • [#3996] dhcpcd not stable on BF548-EZKIT
  • [#5136] Linphone: Can't hear each other and "Data access misaligned address violation"
  • [#5214] trunk applications don't build with trunk toolchain due to missing fork()
  • [#4055] top (busybox) crashs
  • [#5162] Linphone: Data access misaligned address
  • [#4992] bfin_sdh fails to build for BF514/BF516
  • [#5570] reboot on bf527-ezkit with nand and ubifs enabled fails
  • [#4955] 548 SDH: netperf, iperf triggers libertas error
  • [#5522] Lib DirectFB-1.4.0 crashes when run DirectFB demo on SVN trunk
  • [#3882] copy file function cp, after few times consume all memory
  • [#4773] BF527 usb-ide hard disk error

[#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04

[#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04

Submitted By: Vivi Li

Open Date

2009-09-27 03:43:16     Close Date

2009-10-19 23:27:22

Priority:

Medium     Assignee:

Graf Yang

Status:

Closed     Fixed In Release:

N/A

Found In Release:

2010R1     Release:

Category:

Kernel Functions     Board:

N/A

Processor:

ALL     Silicon Revision:

Is this bug repeatable?:

Yes     Resolution:

Fixed

Uboot version or rev.:

    Toolchain version or rev.:

gcc4.1-09r1-rc9

App binary format:

N/A     

Summary: [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04

Details:

Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04.

Bellow is the log for access02, error info is similar with chown03, fchmod06, fchown03, fchown04.

--

root:/> access02

accessI2    1  PASS  :  Functionality of access() for test_file1, successfulllegal use of supervisor resource

<5> - Attempted to use a Supervisor register or instruction from User mode.

<5>   Supervisor resources are registers and instructions that are reserved

<5>   for Supervisor use: Supervisor only registers, all MMRs, and Supervisor

<5>   only instructions.

Deferred Exception context

CURRENT PROCESS:

COMM=access02 PID=162

CPU = 0

TEXT = 0x02d40040-0x02d4bca0        DATA = 0x02d4bca4-0x02d4eb2c

BSS = 0x02d4eb2c-0x02d53b14  USER-STACK = 0x02d5bf68

return address: [0x02d47758]; contents of:

0x02d47730:  6501  3020  bbf1  3031  6007  3211  6421  bbf1

0x02d47740:  640f  9110  0c00  17fa  c682  8017  6420  6001

0x02d47750:  e300  1a36  3200  3208 [9305] bbf6  b9fa  67ff

0x02d47760:  6c21  0c07  6c22  bbfa  6fe2  9110  9308  17f7

ADSP-BF537-0.2 500(MHz CCLK) 125(MHz SCLK) (mpu off)

Linux version 2.6.31-ADI-2010R1-pre-svn7464 (test@uclinux50-bf537-ad9960-ad1836) (gcc version 4.1.2 (ADI svn)) #2 Fri Sep 25 22:9

SEQUENCER STATUS:               Not tainted

SEQSTAT: 0000202e  IPEND: 0008  IMASK: ffff  SYSCFG: 0006

  EXCAUSE   : 0x2e

  physical IVG3 asserted : <0xffa00800> { _trap + 0x0 }

RETE: <0x00000000> /* Maybe null pointer? */

RETN: <0x02a88000> /* kernel dynamic memory */

RETX: <0x00000480> /* Maybe fixed code section */

RETS: <0x02d47754> [ access02 + 0x7714 ]

PC  : <0x02d47758> [ access02 + 0x7718 ]

DCPLB_FAULT_ADDR: <0xfffffffc> /* core mmrs */

ICPLB_FAULT_ADDR: <0x02d47758> [ access02 + 0x7718 ]

PROCESSOR STATE:

R0 : ffffffff    R1 : 00000010    R2 : 00000003    R3 : 00000021

R4 : 02d4e5a4    R5 : 02d4e5ac    R6 : 02d5bd8c    R7 : 00000003

P0 : ffffffff    P1 : ffffffff    P2 : 02d4fbcc    P3 : 02d5bf6c

P4 : 02d4eb28    P5 : 02d4bca4    FP : 02d5bd6c    SP : 02a87f24

LB0: 02d463af    LT0: 02d463ae    LC0: 00000000

LB1: 02d4a8c5    LT1: 02d4a8be    LC1: 00000000

B0 : 00000000    L0 : 00000000    M0 : 00000000    I0 : 02d5bba8

B1 : 00000000    L1 : 00000000    M1 : 00000000    I1 : 02d5bf6c

B2 : 00000000    L2 : 00000000    M2 : 00000000    I2 : 00000000

B3 : 00000000    L3 : 00000000    M3 : 00000000    I3 : 00000000

A0.w: 00000000   A0.x: 00000000   A1.w: 00000000   A1.x: 00000000

USP : 02d5bd5c  ASTAT: 02000000

Hardware Trace:

   0 Target : <0x00004fc0> { _trap_c + 0x0 }

     Source : <0xffa00794> { _exception_to_level5 + 0xa4 } CALL pcrel

   1 Target : <0xffa006f0> { _exception_to_level5 + 0x0 }

     Source : <0xffa005a4> { _bfin_return_from_exception + 0x20 } RTX

   2 Target : <0xffa00584> { _bfin_return_from_exception + 0x0 }

     Source : <0xffa00648> { _ex_trap_c + 0x74 } JUMP.S

   3 Target : <0xffa005d4> { _ex_trap_c + 0x0 }

     Source : <0xffa00868> { _trap + 0x68 } JUMP (P4)

   4 Target : <0xffa00820> { _trap + 0x20 }

     Source : <0xffa0081c> { _trap + 0x1c } IF !CC JUMP

   5 Target : <0xffa00800> { _trap + 0x0 }

     Source : <0x02d47756> [ access02 + 0x7716 ] 0x3208

   6 Target : <0x02d47754> [ access02 + 0x7714 ]

     Source : <0x02d4ac28> [ access02 + 0xabe8 ] RTS

   7 Target : <0x02d4ac20> [ access02 + 0xabe0 ]

     Source : <0x02d4863e> [ access02 + 0x85fe ] RTS

   8 Target : <0x02d48636> [ access02 + 0x85f6 ]

     Source : <0x02d48670> [ access02 + 0x8630 ] JUMP.S

   9 Target : <0x02d48668> [ access02 + 0x8628 ]

     Source : <0x02d44a18> [ access02 + 0x49d8 ] RTS

  10 Target : <0x02d44a08> [ access02 + 0x49c8 ]

     Source : <0x02d48664> [ access02 + 0x8624 ] CALL pcrel

  11 Target : <0x02d48664> [ access02 + 0x8624 ]

     Source : <0x02d48656> [ access02 + 0x8616 ] IF !CC JUMP

  12 Target : <0x02d4864e> [ access02 + 0x860e ]

     Source : <0xffa00d52> { __common_int_entry + 0xda } RTI

  13 Target : <0xffa00cf0> { __common_int_entry + 0x78 }

     Source : <0xffa01134> { _evt_system_call + 0x64 } JUMP.S

  14 Target : <0xffa01134> { _evt_system_call + 0x64 }

     Source : <0xffa009f0> { _system_call + 0xb8 } RTS

  15 Target : <0xffa009ec> { _system_call + 0xb4 }

     Source : <0xffa009dc> { _system_call + 0xa4 } IF !CC JUMP

Userspace Stack

Stack info:

SP: [0x02d5bd5c] <0x02d5bd5c> [ access02 + 0x1bd5c ]

FP: (0x02d5bd6c)

Memory from 0x02d5bd50 to 02d5c000

02d5bd50: 02d4bca4  02d4eb28  00000003 [00000000] 00000000  00000000  02d5bd98 (02d5bda8)

02d5bd70:<02d4713e> 00000000  02d4fbb0  02d4bc68  00000001  00000000  02d5bdac  02d4e5b0

02d5bd90: 02d4bf78  00000000  02d43074  02d43074  00000000  00000000 <02d5bed0><02d408f6>

02d5bdb0: 00000000  02d4bf78  02d4f940  02d4e8c0  02d4e8f8  00008030  00000002 <02d45eee>

02d5bdd0: 02d4f824  02d4f84b  02d5bdfc <02d46c0e> 02d4e9bc  02d4812c  0208a000  00000104

02d5bdf0: 02d4f854  00000005  02d4f838  02d5be4c <02d44bb2> 02d4e9dc  02d4812c  02d4812c

02d5be10: 02d5be2c  00000000  00000001  02d4f840  00000100  02d48ac4  00000001  00000000

02d5be30: 00000000  02d5be64 <02d44c3a> 02d4f824  02d4e76c  02d5beb8  02d5be80  02d5be80

02d5be50:<02d44ab2> 02d4f824  02d4e76c  02d5beb8  00000000  02d4e9dc  00000100 <02d4701c>

02d5be70:<02d5bed0><02d40fb4> 00000100  02d5be98  02d5beb8 <02d4069c> 00000000  02d5bea8

02d5be90: 02d5beb8 <02d40788> 00000000  02d4bc68  000001a4  000001a4  622f2123  732f6e69

02d5beb0: 02000a68  00000005  00000001 <02d40396> 00000000  00000001  02d43074  00636261

02d5bed0: 02d5bf10 <02d40276> 00000000  00000002  00000001  02d4bcf0  02d4bcfc  02d5bf0c

02d5bef0:<02d4683c> 00000000  00000002  00000000  00000001  00000001  02d4bd10  02d4bd1c

02d5bf10: 02d5bf28 <02d482b8> 00000000  00000001  02d5bf6c  00000000  00000000 <02b14dde>

02d5bf30: 02d4bca4  0297e1e0  0297e1a0  00000000  02b609a8  029ecff1  029ecff6  02d4013c

02d5bf50: 00000000  00000000  02d4bc68  02d4bc7a  00000000  02b609a8  00000001  02d5bf8f

02d5bf70: 00000000  02d5bf98  02d5bfa3  02d5bfcb  02d5bfdf  02d5bfe5  00000000  61000000

02d5bf90: 73656363  00323073  4d524554  6e696c3d  50007875  3d485441  6e69622f  73752f3a

02d5bfb0: 69622f72  732f3a6e  3a6e6962  7273752f  6962732f  622f3a6e  48006e69  5f485355

02d5bfd0: 53524556  3d4e4f49  35312e31  5000312e  2f3d4457  504d5400  6d742f3d  622f0070

02d5bff0: 612f6e69  73656363  00323073  00000000

Return addresses in stack:

   frame  1 : <0x02d4713e> [ access02 + 0x70fe ]

    address : <0x02d5bed0> [ access02 + 0x1bed0 ]

    address : <0x02d408f6> [ access02 + 0x8b6 ]

    address : <0x02d45eee> [ access02 + 0x5eae ]

    address : <0x02d46c0e> [ access02 + 0x6bce ]

    address : <0x02d44bb2> [ access02 + 0x4b72 ]

    address : <0x02d44c3a> [ access02 + 0x4bfa ]

    address : <0x02d44ab2> [ access02 + 0x4a72 ]

    address : <0x02d4701c> [ access02 + 0x6fdc ]

    address : <0x02d5bed0> [ access02 + 0x1bed0 ]

    address : <0x02d40fb4> [ access02 + 0xf74 ]

    address : <0x02d4069c> [ access02 + 0x65c ]

    address : <0x02d40788> [ access02 + 0x748 ]

    address : <0x02d40396> [ access02 + 0x356 ]

    address : <0x02d40276> [ access02 + 0x236 ]

    address : <0x02d4683c> [ access02 + 0x67fc ]

    address : <0x02d482b8> [ access02 + 0x8278 ]

    address : <0x02b14dde> [ sh + 0x14dde ]

access02    2  PASS  :  Functionality of access() for test_file2, successful

access02    3  BROK  :  Unexpected signal 4 received.

access02    4  BROK  :  Remaining cases broken

access02    0  WARN  :  tst_rmdir(): rmobj(/tmp/accjdnhXa) failed: rmdir(/tmp/accjdnhXa) failed; errno=39: Directory not empty

access02    5  FAIL  :  Fail to execute the test_file3

access02    6  PASS  :  Functionality of access() for sym_file, successful

access02    0  WARN  :  tst_rmdir(): rmobj(/tmp/accjdnhXa) failed: rmdir(/tmp/accjdnhXa) failed; errno=39: Directory not empty

root:~>

--

Follow-ups

--- Graf Yang                                                2009-10-12 05:44:58

The reason of access02's crash is because of mmap failed,

chown0X's crash seems have different reasons.

--- Graf Yang                                                2009-10-15 23:21:53

Fixed after apply upstream patch 239e40d..0583f16

chown0x/fchxxx test also pass with properly set their permissions.

--- Vivi Li                                                  2009-10-19 23:27:22

OK now. Close it.

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

File Name     File Type     File Size     Posted By

No Files Were Found

  • Share
  • History
  • More
  • Cancel
analog-devices logo

About Analog Devices

  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
  • Instagram page
  • Twitter page
  • Linkedin page
  • Youtube page
  • Facebook
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2025 Analog Devices, Inc. All Rights Reserved

analog-devices

About Analog Devices

Down Up
  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

Down Up
  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue
  • ADI Developer PortalExternalLink

myAnalog

Interested in the latest news and articles about ADI products, design tools, training, and events?

Go to myAnalog
Instagram page Facebook Twitter page Linkedin page Youtube page
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings

©2025 Analog Devices, Inc. All Rights Reserved