Locale Icon
English
  • Forums

    Popular Forums

    • LTspice
    • RF and Microwave
    • Video
    • Power Management
    • Precision ADCs
    • FPGA Reference Designs
    • Linux Software Drivers

    Product Forums

    • Amplifiers
    • Microcontrollers
    • Clock and Timing
    • Data Converters
    • Direct Digital Synthesis (DDS)
    • Energy Monitoring and Metering
    • Interface and Isolation
    • MEMS Inertial Sensors
    • Power Management
    • Processors and DSP
    • Switches/Multiplexers
    • Temperature Sensors
    • Voltage References
    View All

    Application Forums

    • A2B
    • Audio
    • Automated Test Equipment (ATE)
    • Condition-Based Monitoring
    • Depth, Perception & Ranging Technologies
    • Embedded Vision Sensing Library
    • Motor Control Hardware Platforms
    • Precision Technology Signal Chains Library
    • Video
    • Wireless Sensor Networks Reference Library

    Design Center Forums

    • ACE Evaluation Software
    • ADEF System Platforms
    • Design Tools and Calculators
    • FPGA Reference Designs
    • Linux Software Drivers
    • Microcontroller no-OS Drivers
    • Reference Designs
    • Signal Chain Power (SCP)
    • Software Interface Tools
    • System Demonstration Platform (SDP) Support
  • Learn

    Highlighted Webinar

    Simulation and Modeling: Tools for Reducing Risk and Getting to Market

    Models have the potential to accelerate engineers' design process, offering an interactive platform for using and evaluating products. A simulation model...

    Places

    • ADI Education Home
    • ADI Webinars
    • GMSL U
    • StudentZone (Analog Dialogue)
    • Video Annex
    • Virtual Classroom

    Libraries

    • 3D ToF Depth Sensing Library
    • Continuous-Wave CMOS Time of Flight (TOF) Library
    • Embedded Vision Sensing Library
    • Gigabit Multimedia Serial Link (GMSL) Library
    • Optical Sensing Library
    • Precision Technology Signal Chains Library
    • Software Modules and SDKs Library
    • Supervisory Circuits Library
    • Wireless Sensor Networks Library

    Latest Webinars

    • Design Smarter: Integrated Precision Signal Chains for Scientific Instrumentation
    • Simulation and Modeling: Tools for Reducing Risk and Getting to Market
    • Simplifying Connectivity - Remote Controlled (RC) Nodes in a Software Defined Vehicle (SDV)
    • Simplify High-Accuracy Instrumentation Design with Latest Precision Data Converters
    • Design High Performance Power Systems with Ultralow Noise Technology
    View All Webinars
  • Community Hub

    Challenge Yourself!

      KCC's Quizzes AQQ288 about an amazing Equations System

      1. First, the quote of the week: " The chief function of the body is to carry the brain around " - Thomas A. Edison 2. And here is the new challenge...

    View All

    What's Brewing

      GMSL Quiz! Read the blog, take the quiz, and enter to win a gift card!

      Quiz! Read the GMSL Link Lock Blog - Take the Quiz and You are Entered to Win! Important: Read the blog first . The quiz questions are all based on...

    View All

    Places

    • Community Help
    • Logic Lounge
    • Super User Program

    Resources

    • EZ Code of Conduct
    • EZ How To Help Articles
    • Getting Started Guide
    • ADI: Words Matter
    • Community Help Videos
    View All
  • Blogs

    Highlighted Blogs

    When Signals Go South: Preventing Transceiver Failures with Fault Protection

    How a $20 Cable Cost Us $100K—and What You Can Learn from It A few years ago, I was deeply involved in environmental testing for a new product. The setup...

     

    Are Some Diagnostics Self-checking?

    The new draft of IEC 61508 revision 3 contains requirements: For diagnostics on your diagnostics. That diagnostics have a systematic capability....

    Latest Blogs

    • Future-Proof Your Network: Benefits of Integrating Cellular DAS Remote Access Unit: Part 3 of 4
    • Field Monitoring and the Continuous Pursuit of Functional Safety
    • RTL Design and Verification of AXI DMA for Streaming Data
    • Diving into Coil Events in DCM and CCM: Part 2 of 6
    • IO-Link: Power Dissipation in Practice
    Read All Blogs

    ADI Blogs

    • EZ Spotlight
    • The Engineering Mind
  • ContentZone

    Visit ContentZone

    ContentZone

    Technical articles. Blogs. Videos. Your ADI content, all in one place.

    View ContentZone

    Featured Content

    Featured Content Title

    Blurb About Content

    View Content By Industry

    • Aerospace and Defense Systems
    • Automotive Solutions
    • Consumer Technology Solutions
    • Data Center Solutions
    • Energy Solutions
    • Healthcare Solutions
    • Industrial Automation Technology Solutions
    • Instrumentation and Measurement Solutions
    • Intelligent Building Solutions
    • Internet of Things (IoT)
    • Wireless Communication Solutions

    View Content By Technology

    • A2B Audio Bus
    • ADI OtoSense Predictive Maintenance Solutions
    • Dynamic Speaker Management
    • Gallium Nitride (GaN) Technology
    • Gigabit Multimedia Serial Link (GMSL)
    • Industrial Vision
    • Power Solutions
    • Precision Technology
    • RF
    • Security Solutions
    • Sensor Interfaces
    • SmartMesh
  • Partners

    Partner Forums

    • Boston Engineering
    • PalmSens
    • Richardson RFPD

    Partner Libraries

    • Calian, Advanced Technologies Library
    • Clockworks Signal Processing Library
    • Colorado Engineering Inc. (DBA CAES AT&E) Library
    • Epiq Solutions Library
    • Fidus Library
    • Tri-Star Design, Inc. Library
    • VadaTech Library
    • Vanteon Library
    • X-Microwave Library
EngineerZone
EngineerZone
Linux Bug Archive
  • Log In
  • User
  • Site
  • Search
OR
Ask a Question
Linux Bug Archive
  • Processors and DSP
  • Software and Development Tools
  • Linux Distribution for Blackfin
  • Linux Bug Archive
  • Cancel
Linux Bug Archive
Documents [#5973] trunk head kernel would panic when testing trunk head toolchain now(2010)
  • Q&A
  • Documents
  • Members
  • Tags
  • More
  • Cancel
  • +Documents
  • +ad1836: FAQ
  • +ad1938: FAQ
  • +ad1939: FAQ
  • +AD5280: FAQ
  • +ad73311: FAQ
  • +adau1361: FAQ
  • +adau1371: FAQ
  • +adau1373: FAQ
  • +adau1761: FAQ
  • +adp5588-gpio: FAQ
  • +adv7393: FAQ
  • +ADXL34x: FAQ
  • +bf518-ezbrd: FAQ
  • +bf518: FAQ
  • +bf51x: FAQ
  • +bf526-ezbrd: FAQ
  • +bf527-ezkit: FAQ
  • +bf533-stamp/ezkit: FAQ
  • +bf533: FAQ
  • +bf538-ezkit: FAQ
  • +bf548-ezkit: FAQ
  • +BF54x: FAQ
  • +bf561-ezkit: FAQ
  • +bf5xx: FAQ
  • +bfin-mac driver: FAQ
  • +bfin-uclinux-gdb: FAQ
  • +bfin_can.c: FAQ
  • +Blackfin: FAQ
  • +bluetooth: FAQ
  • +Build kernel: FAQ
  • +Build: FAQ
  • +cfcard test: FAQ
  • [#6170] section mismatches in cifs code(2010)
  • [#6173] linphone testing problem(2010)
  • [#6190] BF561-EZKIT SMP kernel can not wake up by uart(2010)
  • [#6194] libxenomai.so.0 can't be found in xenomai kernel with fdpic mode(2010)
  • [#6207] Build error in CTS/RTS testing on board BF548-EZKIT(2010)
  • [#6251] pread/pwrite arent decoded correctly by strace(2010)
  • [#6253] strace build failed in trunk with outdated toolchain (missing asm/cachectl.h)(2010)
  • [#6255] Busybox inetd crashes/rsh noconnet/ssh(2010)
  • [#6265] libpng build fails due to not finding zlib(2010)
  • [#6271] "nand unlock" is an unsupported command in u-boot update in nand flash(2010)
  • [#6272] After update u-boot in spi flash, BF548-EZKIT can not boot from spi flash(2010)
  • +gadget fs bulk: FAQ
  • +gadget zero bulk: FAQ
  • +gadget zero control: FAQ
  • +Kernel xip: FAQ
  • +ltp test: FAQ
  • +microwin test: FAQ
  • +MPU kernel: FAQ
  • +Sl811-hcd.c USB: FAQ
  • +SPORT channel: FAQ
  • -trunk head kernel: FAQ
    • [#5973] trunk head kernel would panic when testing trunk head toolchain now(2010)
  • +usb otg driver: FAQ
  • +zlib: FAQ
  • +Illegal i2c: FAQ
  • +isp1362-hcd: FAQ
  • +Kernel: FAQ
  • +KGDBOE: FAQ
  • [#4646] Varittronix LCD driver mixes blue and Red
  • +serial driver: FAQ
  • +sigma firmware: FAQ
  • +spi transaction: FAQ
  • +strace FAQ
  • [#4787] [ltp] LTP test case shmctl01 failed in trunk for ltp-full-20081130
  • +tiff-4.0.0beta4: FAQ
  • [#5264] ping packet size test will fail for gadget ethernet test with DMA mode
  • +USBHOST: FAQ
  • +USB_EP_NI7_RXINTERVAL: FAQ
  • [#5257] Build usb gadget driver with DMA mode will fail
  • [#4708] Blackfin irda build fails for bf533-stamp
  • [#4735] unaligned accesses in qt webkit
  • [#5168] build cpufrequtils into fdpic format has error
  • [#5321] modprobe i2c lcd on bf533 stamp wait long time
  • [#4922] unwanted sound comes up after g_audio module is installed on BF548 and BF527
  • [#5176] app cpufrequtils in Blackfin app programs fails to build in FDPIC
  • [#5237] musb driver is broken after linux-2.6.30 update
  • [#5255] ping target board sometimes get wrong data byte for gadget ethernet pio mode
  • [#5336] canbus and ppifcd drivers can not be built on BF538-EZKIT
  • [#6614] Kernel panic frequently when test sdio mmc on bf518-ezbrd(2011)
  • +SPI driver: FAQ
  • [#4714] the first time to build mtd-utils will fail in trunk
  • [#5524] drivers/video/bfin_adv7393fb.c build fails in 2.6.31 due to old i2c usage
  • [#5525] drivers/video/bf537-lq035.c build fails in 2.6.31 due to old i2c usage
  • [#5399] no sound when record in board and listen in PC for linphone test of ad1836 on bf533-stamp
  • [#5458] Drivers Serial:bfin_5xx:ttyBFx fails to generate resume from standby
  • [#4647] build samba fails on trunk now for redefinition in fcntl.h
  • [#5526] ip0x board has broken UART defines after resource reorganization
  • [#5527] drivers/media/video/blackfin/blackfin_cam.c build fails in 2.6.31 due to old i2c usage
  • [#5352] bfin_sport.c setup 2D DMA
  • [#5528] fs/binfmt_elf_fdpic.c build fails when CONFIG_ELF_CORE is enabled in 2.6.31
  • [#5464] isram_write() seems to be busted
  • [#5376] mmap05 sometimes can not pass when MPU
  • [#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31
  • [#5361] Microwin (nanox) failed on trunk using AD7897 touch screen
  • [#5544] Sport uart TX stop waiting loop is too long to block RX interrupt in PIO mode when do duplex communication
  • [#5363] spi mmc is not supported in bf533-stamp
  • [#5550] fail to flash ubifs.img to nand
  • [#5470] build xenomai fails for no switchbench
  • [#5437] mathtest fails to compile
  • [#5551] SPI message lost when bus locked
  • [#5370] alsa tool fails to work after wake up from mem in bf537-stamp with ad1836 (can't resolve symbol)
  • [#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04
  • [#5377] amixer fail to run on ad1836 audio driver on BF537-STAMP
  • [#5475] build mkfs.ubifs on trunk head fails
  • [#5562] [ltp]some ltp test case is broken for getipckey and getcwd
  • [#5487] build usb.c fail in testsuites/usbdev/ test at asm/swab.h
  • [#5489] t2/t4 failed in gadget zero bulk test with dma mode
  • [#5567] build nand for bf537 fails on trunk
  • [#5494] Run tftlcd test case in bf548-ezkit, kernel crashed at the end
  • [#4879] traps test case 21 exception 0x3f: l1_instruction_access would make kernel panic on bf533 stamp
  • [#5568] Framebuffer DMA Error!!
  • [#5515] 4 more trap cases fails on bf533
  • [#5379] run scratchpad case sometimes would fail
  • [#5519] pushing Blackfin serial resources to boards broke many boards
  • [#5389] build pictureflow fails at branch head
  • [#5531] Usb SL811 failed on uclinux2009r1-rc6 on bf532 board.
  • [#5523] Blackfin MUSB build fails after update to 2.6.31
  • [#5391] For ad1836 and ad1981b, sometimes sound shakes at the end
  • [#5404] build kernel with 0x2000 as BOOT_LOAD address sometimes would fails at build-busybox-1.13.4
  • [#5469] CPU hardly idles anymore in svn trunk
  • [#5695] Build bf537-stamp fails at ad73322 for the latest trunk
  • [#5702] build xenomai into fdpic format fails for no libnative.so
  • [#5427] ircp failed on bf533-stamp
  • [#5708] Kernel can not boot up when spimmc driver is interrupt drivern in PIO mode
  • [#5711] gfortran case default_format_1.exe fails on 09r1 kernel but pass on trunk head
  • [#5712] I2C client drivers using dev_pm_ops fail to receive suspend/resume callbacks
  • [#5715] libpcap fails to compile in trunk
  • [#5589] STLport build fails
  • [#5724] SPORT driver crash on reload
  • [#5449] bfin_sdh doesn't save and restore peripheral context upon resume
  • [#5580] GPIO pin not reserved for CTS function on SPORT-UART driver
  • [#5521] trunk head build fails at ipc/shm.c
  • [#5636] generic gpio works on bf533 in the opposite way
  • [#5637] Kernel crashed when arecord and aplay on bf537-stamp with SoC I2S audio
  • [#5647] SPI driver bus_unlock() does not schedule postponed SPI messages
  • [#5683] build nand fails for format error
  • [#5689] while two or multi spi devices use gpio cs, spi setup will fail
  • [#5558] bfin mac multi-cast sending fails to work
  • [#5816] PREEMPT_RT: cyclic test stalls in some test mode
  • [#5824] some kernel modules fail to link due to losing strcpy in trunk head
  • [#5707] error in user/procps/Makefile
  • [#5841] [ltp] ltp test case shmctl01/semctl01 can not execute
  • [#5605] Build bf537-stamp fail at bf5xx-i2s.c in latest trunk
  • [#5614] With latest toolchain in trunk, fail to build some apps and libs at fork
  • [#5625] Build microwin app fails in trunk with 4.3 toolchain
  • [#5626] Build lib mad fail at option "-fforce-mem" with gcc 4.3
  • [#5722] bfin_sport_spi broken by cs_gpio changes
  • [#5627] fail to control gpio used by led and button through /sys/class/gpio/
  • [#5927] PR bit other than RAF bit in EMAC OPMODE register should be set for promisuous mode in bfin_mac driver
  • [#5727] build e2fsprogs-1.41.12 fail sometimes because of compiling order
  • [#5631] Build lib confuse failed with gcc 4.3 toolchain
  • [#5759] fix build for pwlib
  • [#5651] Build lirc failed at missing files
  • [#5931] Trying to compile CAN4LINUX for BF537-STAMP board but compilation is failing
  • [#5656] Build iproute2 fails at trunk for dlfcn.h when built as FLAT
  • [#5743] sound/soc/blackfin/bf5xx-ad1938.c build fails after 2.6.32 upgrade
  • [#5801] No interrupt occurs when reconnect gadget device in OTG mode.
  • [#5657] [ltp] ltp test case mount03/umount03 fail with error of "No such device"
  • [#5808] mmc configuration error in make config
  • [#5804] bf531: ethernet not working when switching to 2009R1
  • [#5810] initial sp is given wrong value and INIT_TASK_DATA is not linked into data
  • [#6335] Build xip failed in fdpic format when xenomai is enabled
  • [#7224] undifined variable x25_address in ./user/net-tools/lib/x25_src.c
  • [#5598] bluez-utils has parallel build issues with parser.h
  • [#5668] Fail to build app bluez-utils
  • [#7251] Blackfin SPI driver doesn't handle repeated changes in CPOL, CPHA and LSBF correctly
  • [#5767] In 09r1.1 branch, all ltp test cases show stack overflow in bf561 SMP kernel
  • [#5684] touching keypad on bf548 will make system dead and restart
  • [#7287] Can not build usb.c with libaio
  • [#5687] SPI read/write be wrong after suspend to memory and resume
  • [#7315] [ltp] ltp test case getrusage04 from ltp-full-20120903 fails in trunk
  • [#7328] Fail to compile pthread_test after toolchain update
  • [#5876] Repeating rsh/rcp causes error "poll: protocol failure in circuit setup"
  • [#7329] Fail to compile netperf after toolchain update
  • [#7333] Test dll fails to run after toolchain update
  • [#5741] adau1371 and adau1761 fail to build after 2.6.32 upgrade
  • [#7337] [ltp] ltp test case mount02 fails in ltp-full-20120903
  • [#7338] [ltp] ltp test case mount03 fails in ltp-full-20120903
  • [#5821] Fail to build pngview on regression machines with suse 10.2
  • [#5900] hardware single stepping in userspace does not handle syscalls correctly
  • [#5659] [ltp] ltp test case eventfd01 fail
  • [#7339] [ltp] can not apply patch of lchown02 in ltp-full-20101031 to ltp-full-20120903
  • [#7343] [ltp] LTP test case chdir04 fails in ltp-full-20120903
  • [#7396] build netperf fails for undefined reference to `___CPU_ZERO'
  • [#7483] bfin_sport driver does not work well in TDM DMA mode
  • [#7506] Dropbear does not build
  • [#5757] drop USER_SQUASHFS_MKSQUASHFS7Z as squashfs 4.0 does not support 7z anymore
  • [#5758] fix build for libopenh323
  • [#5833] trap test running on the second core of bf561 has serveral fails
  • [#5755] romfs target fails for lib/pwlib
  • [#5760] fix asterisk build
  • [#5756] romfs target fails for lib/libopenh323
  • [#5877] SPI transmit cs_change flag not properly handled
  • [#5939] bfin-can fails to build after linux-2.6.33 upgrade
  • [#5879] GPIO controlled slave request may fail when bfin_spi_setup() gets executed twice
  • [#5774] [ltp]ltp test case will be killed by oom-killer on bf533-ezkit in 09r1 branch occasionally
  • [#5894] BF527 uImage Flashing issue(Copy to Flash... Flash not Erased)
  • [#5941] links fails in trunk due to using fork()
  • [#5942] build usb host fail when remove anomaly 456 for BF526-EZBRD
  • [#7250] On bfin ppi test, it fails to quit from slave when send "q" from master
  • [#7379] Fail to build alsa lib in latest trunk with upgraded toolchain
  • [#5792] enc28j60 spi net fails to ping with host on trunk head kernel
  • [#4436] BF527-EZKIT unable to receive large files over UART in DMA mode
  • [#4764] Kernel prints warning when booting from jffs2 rootfs in nor flash on bf548-ezkit
  • [#5903] Impossible to work properly with two or more SPI slave devices using spi_bfin5xx driver.
  • [#6386] build iproute2 may fail at ifstat.c sometimes in latest trunk(2010)
  • [#6331] There is error in adau1371 audio testing on bf527-ezkit(2010)
  • [#5933] BF561-EZKIT SMP kernel can not wake up from standby mode by uart interrupt
  • [#4713] dmacopy tries to test L2 on BF537
  • [#6564] dmacopy test on bf561-ezkit failed at sram_alloc in L1(2011)
  • [#4997] ppitest fails for bfin_ppi driver on bf537
  • [#5940] lynx fails in trunk due to using fork()
  • [#4104] Format usbdisk failed with mke2fs in trunk
  • [#6578] iccutils build fails at scalar.c(2011)
  • [#3883] ftp server crash after connetion or chdir with MidnightCommander4.6.1
  • [#4697] kernel crash on bf533-stamp/bf533-ezkit after config IP for ethernet port
  • [#4050] xip test case failed in BF548-EZKIT
  • [#3991] mmc_spi not working out of the box.
  • [#3996] dhcpcd not stable on BF548-EZKIT
  • [#5136] Linphone: Can't hear each other and "Data access misaligned address violation"
  • [#5214] trunk applications don't build with trunk toolchain due to missing fork()
  • [#4055] top (busybox) crashs
  • [#5162] Linphone: Data access misaligned address
  • [#4992] bfin_sdh fails to build for BF514/BF516
  • [#5570] reboot on bf527-ezkit with nand and ubifs enabled fails
  • [#4955] 548 SDH: netperf, iperf triggers libertas error
  • [#5522] Lib DirectFB-1.4.0 crashes when run DirectFB demo on SVN trunk
  • [#3882] copy file function cp, after few times consume all memory
  • [#4773] BF527 usb-ide hard disk error

[#5973] trunk head kernel would panic when testing trunk head toolchain now(2010)

[#5973] trunk head kernel would panic when testing trunk head toolchain now

Submitted By: Mingquan Pan

Open Date

2010-03-16 22:48:26     Close Date

2010-03-25 00:18:54

Priority:

Medium High     Assignee:

Robin Getz

Status:

Closed     Fixed In Release:

N/A

Found In Release:

2010R1     Release:

Category:

N/A     Board:

N/A

Processor:

ALL     Silicon Revision:

Is this bug repeatable?:

Yes     Resolution:

Assigned (Not Start)

Uboot version or rev.:

    Toolchain version or rev.:

trunk head 4.3

App binary format:

N/A     

Summary: trunk head kernel would panic when testing trunk head toolchain now

Details:

trunk head kernel would panic when testing trunk head toolchain now again.

It would stop at gcc test or libstdc++ or somewhere else.

CURRENT PROCESS:

COMM=wo_prof_malloc_ PID=31462  CPU=0

TEXT = 0x02e40040-0x02e41620        DATA = 0x02e41640-0x02e41a44

BSS = 0x02e41a44-0x02e41a90  USER-STACK = 0x02e55f20

return address: [0x00034ce8]; contents of:

0x00034cc0:  001b  e631  0017  e431  0026  606a  9149  0a11

0x00034cd0:  e731  0013  1c0e  484e  17d2  e14a  0021  e10a

0x00034ce0:  ff15  9910  0c00  17cb [efcd] 6008  9b10  2fc7

0x00034cf0:  b330  6100  5406  4a30  af31  6009  e432  0026

ADSP-BF548-0.2 525(MHz CCLK) 131(MHz SCLK) (mpu off)

Linux version 2.6.33.1-ADI-2010R1-pre-svn8465 (test@44-bf548-toolchain) (gcc version 4.3.4 (ADI-trunk/svn-3951) ) #22 Tue Mar 16 06:59:11 CST 2010

SEQUENCER STATUS:               Not tainted

SEQSTAT: 00060021  IPEND: 8008  IMASK: ffff  SYSCFG: 0006

  EXCAUSE   : 0x21

  physical IVG3 asserted : <0xffa006e4> { _trap + 0x0 }

  physical IVG15 asserted : <0xffa00da8> { _evt_system_call + 0x0 }

  logical irq   6 mapped  : <0xffa0039c> { _bfin_coretmr_interrupt + 0x0 }

  logical irq   9 mapped  : <0x000bad54> { _bfin_bf54x_irq_error + 0x0 }

  logical irq  10 mapped  : <0x001325d4> { _err_handler + 0x0 }

  logical irq  14 mapped  : <0x00105374> { _bfin_rtc_interrupt + 0x0 }

  logical irq  16 mapped  : <0x001328d8> { _rx_handler + 0x0 }

  logical irq  17 mapped  : <0x0013287c> { _tx_handler + 0x0 }

  logical irq  48 mapped  : <0x000c7a24> { _bfin_serial_dma_rx_int + 0x0 }

  logical irq  49 mapped  : <0x000c77a8> { _bfin_serial_dma_tx_int + 0x0 }

  logical irq  52 mapped  : <0x00107bf0> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  53 mapped  : <0x00107bf0> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  68 mapped  : <0x000ea688> { _bfin_ata_interrupt + 0x0 }

  logical irq  74 mapped  : <0x000f9a98> { _bf5xx_nand_dma_irq + 0x0 }

  logical irq  76 mapped  : <0x001033b4> { _bfin_kpad_isr + 0x0 }

  logical irq 175 mapped  : <0x00100750> { _smsc911x_irqhandler + 0x0 }

RETE: <0x00000000> /* Maybe null pointer? */

RETN: <0x009d3dc0> /* kernel dynamic memory (maybe user-space) */

RETX: <0x00000480> /* Maybe fixed code section */

RETS: <0x00034c76> { ___alloc_pages_nodemask + 0xae }

PC  : <0x00034ce8> { ___alloc_pages_nodemask + 0x120 }

DCPLB_FAULT_ADDR: <0x0021ff15> /* kernel dynamic memory (maybe user-space) */

ICPLB_FAULT_ADDR: <0x00034ce8> { ___alloc_pages_nodemask + 0x120 }

PROCESSOR STATE:

R0 : 00000000    R1 : 00000013    R2 : 0000000d    R3 : 00000041

R4 : 00000010    R5 : 00000001    R6 : 000000d0    R7 : 00000000

P0 : 002314bc    P1 : 02c198e0    P2 : 0021ff15    P3 : 00000000

P4 : 0023c13c    P5 : 5c5a3000    FP : 00000000    SP : 009d3ce4

LB0: 000aec4c    LT0: 000aec4c    LC0: 00000000

LB1: 00a929f3    LT1: 00a929e8    LC1: 00000000

B0 : 00000001    L0 : 00000000    M0 : 00000000    I0 : 0085956c

B1 : 00000000    L1 : 00000000    M1 : 00000001    I1 : 00000000

B2 : 00be9653    L2 : 00000000    M2 : 00000000    I2 : 00000000

B3 : 00000000    L3 : 00000000    M3 : 00000000    I3 : 00000000

A0.w: 0000008b   A0.x: 00000000   A1.w: 0000008b   A1.x: 00000000

USP : 02e55e60  ASTAT: 02003025

Hardware Trace:

   0 Target : <0x00003fc8> { _trap_c + 0x0 }

     Source : <0xffa00676> { _exception_to_level5 + 0x9a } JUMP.L

   1 Target : <0xffa005dc> { _exception_to_level5 + 0x0 }

     Source : <0xffa00498> { _bfin_return_from_exception + 0x18 } RTX

   2 Target : <0xffa00480> { _bfin_return_from_exception + 0x0 }

     Source : <0xffa0053c> { _ex_trap_c + 0x74 } JUMP.S

   3 Target : <0xffa004c8> { _ex_trap_c + 0x0 }

     Source : <0xffa0073c> { _trap + 0x58 } JUMP (P4)

   4 Target : <0xffa006e4> { _trap + 0x0 }

      FAULT : <0x00034ce8> { ___alloc_pages_nodemask + 0x120 } 0xefcd6008

     Source : <0x00034ce6> { ___alloc_pages_nodemask + 0x11e } IF !CC JUMP pcrel (BP)

   5 Target : <0x00034cb6> { ___alloc_pages_nodemask + 0xee }

     Source : <0x00034c7a> { ___alloc_pages_nodemask + 0xb2 } IF CC JUMP pcrel

   6 Target : <0x00034c76> { ___alloc_pages_nodemask + 0xae }

     Source : <0x00034ada> { _get_page_from_freelist + 0x1fa } RTS

   7 Target : <0x00034ac2> { _get_page_from_freelist + 0x1e2 }

     Source : <0x0003a9d2> { _next_zones_zonelist + 0x26 } RTS

   8 Target : <0x0003a9ca> { _next_zones_zonelist + 0x1e }

     Source : <0x0003a9bc> { _next_zones_zonelist + 0x10 } IF !CC JUMP pcrel

   9 Target : <0x0003a9ac> { _next_zones_zonelist + 0x0 }

     Source : <0x00034abe> { _get_page_from_freelist + 0x1de } CALL pcrel

  10 Target : <0x00034aa8> { _get_page_from_freelist + 0x1c8 }

     Source : <0x00034bba> { _get_page_from_freelist + 0x2da } IF CC JUMP pcrel (BP)

  11 Target : <0x00034bb8> { _get_page_from_freelist + 0x2d8 }

     Source : <0x00032ff4> { _zone_watermark_ok + 0x7c } RTS

  12 Target : <0x00032ff0> { _zone_watermark_ok + 0x78 }

     Source : <0x00032fcc> { _zone_watermark_ok + 0x54 } IF CC JUMP pcrel

  13 Target : <0x00032fae> { _zone_watermark_ok + 0x36 }

     Source : <0x00032fa0> { _zone_watermark_ok + 0x28 } IF CC JUMP pcrel (BP)

  14 Target : <0x00032f9e> { _zone_watermark_ok + 0x26 }

     Source : <0x00032f92> { _zone_watermark_ok + 0x1a } IF CC JUMP pcrel (BP)

  15 Target : <0x00032f78> { _zone_watermark_ok + 0x0 }

     Source : <0x00034bb4> { _get_page_from_freelist + 0x2d4 } CALL pcrel

Kernel Stack

Stack info:

SP: [0x009d3f24] <0x009d3f24> /* kernel dynamic memory (maybe user-space) */

Memory from 0x009d3f20 to 009d4000

009d3f20: 00000000 [02e4111c] 00008000  00060000  00000000  009d4000  02e4111c  02e4111c

009d3f40: 02e4085a  ffa00e0c  02001025  00a929f3  00a8d5bf  00a929e8  00a8d5ac  00000000

009d3f60: ffffffff  0000008b  00000000  0000008b  00000000  00000000  00be9653  00000000

009d3f80: 00000001  00000000  00000000  00000000  00000000  00000000  00000000  00000001

009d3fa0: 00000000  00000000  00000000  00000000  0085956c  02e55e60  02e55e6c  00000000

009d3fc0: 00000001  02e419b0  00000000  02e41904  000000c0  5c5a3000  02e55f24  00000000

009d3fe0: 00000000  04000021  00000003  5c5a3000  00000000  00000000  000000c0  00000006

Return addresses in stack:

Modules linked in:

Kernel panic - not syncing: Kernel exception

Hardware Trace:

Stack info:

SP: [0x009d3c00] <0x009d3c00> /* kernel dynamic memory (maybe user-space) */

FP: (0x009d3eec)

Memory from 0x009d3c00 to 009d4000

009d3c00:[001c41d8] 00183fe2  009d3ce4  001c41d8  002196de  002196de  002196de  009d3c38

009d3c20: 00004404  009d3ce4  ffe02014  00000000  00008008  009d3ce4  0000001f  0000001f

009d3c40: 00000000  00000000  00030001  00000020  0023b6bc  00030370  0001239c  009d3d74

009d3c60: 00000000  02961a80  00000002  00000001  0004f062  02ad76b0  00031ca0  009d3d74

009d3c80: 02961a40  00031ca0  009d3d74  02961a40  009d3d74  00000000  00be9653  00000000

009d3ca0: 00000001  00030370  00000000  00000000  00000000  009d3d38  000006f4  00000000

009d3cc0: ffa0067a  00216000  00008008  00060021  00000001  00000010  02961a40  009d3e00

009d3ce0: 00000480  00000480  00008008  00060021  00000000  009d3dc0  00000480  00034ce8

009d3d00: 00034c76  00000000  02003025  00a929f3  000aec4c  00a929e8  000aec4c  00000000

009d3d20: 00000000  0000008b  00000000  0000008b  00000000  00000000  00be9653  00000000

009d3d40: 00000001  00000000  00000000  00000000  00000000  00000000  00000000  00000001

009d3d60: 00000000  00000000  00000000  00000000  0085956c  02e55e60  00000000  5c5a3000

009d3d80: 0023c13c  00000000  0021ff15  02c198e0  002314bc  00000000  000000d0  00000001

009d3da0: 00000010  00000041  0000000d  00000013  00000000  00000000  002314bc  00000006

009d3dc0: 000200d0  00000000  00013970  0023c13c  00000001  00000041  0023b6bc  00000000

009d3de0: 02e40040  02e41620  000002f0  00000004  00001a24  000153e4  00069fb8  000200d0

009d3e00: 0023c140  00000000  00000000  02c198e0  009d3e68  0006a0e6  02afa600  0023b6bc

009d3e20: 0023198c  00000fff  0006a170  0023b6bc  028f7718  0003cf44  5c5a3000  02ee7cd4

009d3e40: 02ee7cd4  00000013  00000073  00000000  5c5a3000  0023b6e4  00000013  00ae9cd0

009d3e60: 00000000  008f5600  028f7718  028f7718  0003d2aa  00000000  02ee7cd4  00000000

009d3e80: 00000003  00000073  00000000  5c5a3000  000450fc  02afa67c  5c5a3000  00000004

009d3ea0: 04000021  00000000  009d3eb0  00859628  00000004  02e55e6c  0003d628  00000000

009d3ec0: 5c5a3000  02e419b0  009d2000  00000000  04000021  00000003  0000000b  00000000

009d3ee0: 0085c000  00000003  04000021 (00000000)<ffa00876> 0003d5e4  000000c0  00000000

009d3f00: ffffe000  00000000  00000000  00859668  02c198e0  00000001  04000021  00000000

009d3f20: 00000000  02e4111c  00008000  00060000  00000000  009d4000  02e4111c  02e4111c

009d3f40: 02e4085a  ffa00e0c  02001025  00a929f3  00a8d5bf  00a929e8  00a8d5ac  00000000

009d3f60: ffffffff  0000008b  00000000  0000008b  00000000  00000000  00be9653  00000000

009d3f80: 00000001  00000000  00000000  00000000  00000000  00000000  00000000  00000001

009d3fa0: 00000000  00000000  00000000  00000000  0085956c  02e55e60  02e55e6c  00000000

009d3fc0: 00000001  02e419b0  00000000  02e41904  000000c0  5c5a3000  02e55f24  00000000

009d3fe0: 00000000  04000021  00000003  5c5a3000  00000000  00000000  000000c0  00000006

Return addresses in stack:

   frame  1 : <0xffa00876> { _system_call + 0x6a }

Rebooting in 3 seconds..

U-Boot 1.1.6-svn1273 (ADI-2008R1.5) (Jul 21 2008 - 00:35:12)

CPU:   ADSP bf548-0.0 (Detected Rev: 0.2)

Board: ADI BF548 EZ-Kit board

       Support: http://blackfin.uclinux.org/

Clock: VCO: 525 MHz, Core: 525 MHz, System: 131 MHz

RAM:   64 MB

Flash: 16 MB

NAND:  256 MiB

In:    serial

Out:   serial

Err:   serial

Net:   LAN9x18 (0x118a0000) detected at 0x24000000

MAC:   00:E0:22:FE:BD:0A

Hit any key to stop autoboot:  0

start Auto negotiation... (take ~2sec)

Auto negotiation complete, 100BaseTX, full duplex

TFTP from server 10.100.4.174; our IP address is 10.100.4.50

Filename 'uImage'.

Load address: 0x2000000

Loading: #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #######################################################

done

Bytes transferred = 4607953 (464fd1 hex)

## Booting image at 02000000 ...

   Image Name:   bf548-2.6.33.1-ADI-2010R1-pre-sv

   Created:      2010-03-15  22:59:21 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    4607889 Bytes =  4.4 MB

   Load Address: 00001000

   Entry Point:  002529a8

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 2529a8

console [ttyBF1] enabled, bootconsole disabled

Calibrating delay loop... 1046.52 BogoMIPS (lpj=2093056)

Mount-cache hash table entries: 512

Blackfin Scratchpad data SRAM: 4 KB

Blackfin L1 Data A SRAM: 16 KB (16 KB free)

Blackfin L1 Data B SRAM: 16 KB (16 KB free)

Blackfin L1 Instruction SRAM: 48 KB (42 KB free)

Blackfin L2 SRAM: 128 KB (128 KB free)

NET: Registered protocol family 16

Blackfin DMA Controller

ezkit_init(): registering device resources

bio: create slab <bio-0> at 0

SCSI subsystem initialized

First seen version:

toolchain 4000   uclinux-dist 9497 linux 8465

last good version:

toolchain 3999   uclinux-dist 9497 linux 8463

Follow-ups

--- Mingquan Pan                                             2010-03-18 22:35:59

It looks with the kernel version of uclinux-dist 9497 and linux 8464, the

testing on bf533 stamp and bf527 ezkit is still ok.

--- Sonic Zhang                                              2010-03-18 23:39:20

Robin's patch 8465 against traps and trace has this regression.

--- Robin Getz                                               2010-03-22 11:21:01

Sort of --

The problem is because Mike picked a 32-bit opcode for the BUG_opcode, without

actually making it 32-bits.

include/asm/bug.h:#define BFIN_BUG_OPCODE       0xefcd

If ((opcode0 & 0xc000) == 0xc000) it is a 32-bit opcode, and my change was

to make 32-bit opcodes treated as a single ints, rather than 2 shorts...

There are two ways to fix - define BFIN_BUG_OPCODE as 0xefcd0000, or hack

things up in the check for the BUG_OPCODE, to only look at the first 16-bits.

I can do either - Mike - do you have a preference?

-Robin

--- Mike Frysinger                                           2010-03-22 16:19:14

the exact opcode doesnt matter to me ... we might want to pick one of the 16bit

ones that are currently being used with the pseudo debug ops ?

also, even if the opcode is bogus, why is the kernel panicing ?  does that mean

it'll panic on any "bad" opcode that someone tries to execute ?

--- Robin Getz                                               2010-03-22 17:01:17

OK - I'll update the opcode to a unused 16-bit one.

The BUG is coming from the kernel (a WARN_)... When the kernel executes a

unknown opcode - it panics.

-Robin

--- Robin Getz                                               2010-03-23 13:25:31

should be fixed now.

-Robin

--- Mingquan Pan                                             2010-03-25 00:17:36

Yes, the toolchain testing goes back to normal now. So close this.

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

File Name     File Type     File Size     Posted By

No Files Were Found

  • Share
  • History
  • More
  • Cancel
analog-devices logo

About Analog Devices

  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue

Get the Latest News

Stay up to date with our latest news and articles about Analog Devices' products, design tools, trainings, and events.

Sign Up Now
  • Instagram page
  • Twitter page
  • Linkedin page
  • Youtube page
  • Facebook
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings
沪ICP备09046653号-1

©2025 Analog Devices, Inc. All Rights Reserved

analog-devices

About Analog Devices

Down Up
  • Who We Are
  • Careers
  • Newsroom
  • What We Do (Signals+)
  • Investor RelationsExternalLink
  • Quality & Reliability
  • Sales and Distribution
  • What's New on Analog.com
  • Contact Us

Find Help

Down Up
  • Support
  • Resources
  • WikiExternalLink
  • Analog Dialogue

Get the Latest News

Stay up to date with our latest news and articles about Analog Devices' products, design tools, trainings, and events.

Instagram page Facebook Twitter page Linkedin page Youtube page
  • Legal and Risk
  • Accessibility
  • Privacy Policy
  • Privacy Settings
  • Cookie Settings
沪ICP备09046653号-1

©2025 Analog Devices, Inc. All Rights Reserved