[#6166] can't reboot kernel successfully when test bluetooth cf(2010)

[#6166] can't reboot kernel successfully when test bluetooth cf

Submitted By: angelia wu

Open Date

2010-08-08 23:58:14 Close Date

2010-08-18 22:45:45

Priority:

Medium Assignee:

steven miao

Status:

Closed Fixed In Release:

N/A

Found In Release:

2010R1 Release:

Blackfin Linux:2010R1

Category:

N/A Board:

STAMP

Processor:

BF537 Silicon Revision:

Is this bug repeatable?:

Yes Resolution:

Rejected

Uboot version or rev.:

Toolchain version or rev.:

svn-4681

App binary format:

N/A

Summary: can't reboot kernel successfully when test bluetooth cf

Details:

can't reboot kernel successfully when test bluetooth cf.

And the last Release 2009R1.1 is right.

the Error is following.

Hit any key to stop autoboot: 0

Using bfin_mac device

TFTP from server 10.100.4.174; our IP address is 10.100.4.50

Filename 'uImage'.

Load address: 0x1000000

Loading: #################################################################

#################################################################

#####################################

done

Bytes transferred = 5306800 (50f9b0 hex)

## Booting kernel from Legacy Image at 01000000 ...

Image Name: bf537-2.6.34.2-ADI-2010R1-pre

Created: 2010-08-09 2:42:52 UTC

Image Type: Blackfin Linux Kernel Image (gzip compressed)

Data Size: 5306736 Bytes = 5.1 MiB

Load Address: 00001000

Entry Point: 001c5684

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Starting Kernel at = 001c5684

Linux version 2.6.34.2-ADI-2010R1-pre (test@uclinux41) (gcc version 4.3.5 (ADI-trunk/svn-4681) ) #22 Mon Aug 9 10:42:46 CST 2010

bootconsole [early_shadow0] enabled

bootconsole [early_BFuart0] enabled

early printk enabled on early_BFuart0

Limiting kernel memory to 56MB due to anomaly 05000263

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

fixedcode = 0x00000400-0x00000490

text = 0x00001000-0x001334d0

rodata = 0x001334d0-0x00196800

bss = 0x00197000-0x001a757c

data = 0x001a757c-0x001ba000

stack = 0x001b8000-0x001ba000

init = 0x001ba000-0x009ab000

available = 0x009ab000-0x03800000

DMA Zone = 0x03f00000-0x04000000

Hardware Trace Active and Enabled

Boot Mode: 0

Reset caused by Software reset

Compiled for ADSP-BF537 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 500 MHz core clock and 62 MHz System Clock

NOMPU: setting up cplb tables

Instruction Cache Enabled for CPU0

External memory: cacheable in instruction cache

Data Cache Enabled for CPU0

External memory: cacheable (write-back) in data cache

Built 1 zonelists in Zone order, mobility grouping off. Total pages: 14224

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart0,57600 console=ttyBF0,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:2f

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory available: 46876k/65536k RAM, (8132k init code, 1225k kernel code, 539k data, 1024k dma, 7740k reserved)

Hierarchical RCU implementation.

NR_IRQS:138

Configuring Blackfin Priority Driven Interrupts

console [ttyBF0] enabled, bootconsole disabled

Calibrating delay loop... 993.28 BogoMIPS (lpj=1986560)

Security Framework initialized

Mount-cache hash table entries: 512

Blackfin Scratchpad data SRAM: 4 KB

Blackfin L1 Data A SRAM: 16 KB (16 KB free)

Blackfin L1 Data B SRAM: 16 KB (16 KB free)

Blackfin L1 Instruction SRAM: 48 KB (35 KB free)

NET: Registered protocol family 16

Blackfin DMA Controller

stamp_init(): registering device resources

bio: create slab <bio-0> at 0

bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs_base@ffc00500, dma channel@7

Bluetooth: Core ver 2.15

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Switching to clocksource bfin_cs_cycles

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

msgmni has been set to 91

io scheduler noop registered

io scheduler cfq registered (default)

bfin-uart: Blackfin serial driver

bfin-uart.0: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART

brd: module loaded

bfin_mii_bus: probed

bfin_mii_bus: Can't get IRQ 65535 (PHY)

bfin_mac: attached PHY driver [SMSC LAN83C185] (mii_bus:phy_addr=0:01, irq=-1, mdc_clk=2500000Hz(mdc_div=11)@sclk=62MHz)

bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1

bfin_cf_pcmcia bfin_cf_pcmcia: Blackfin CompactFlash/PCMCIA Socket Driver

bfin_cf_pcmcia bfin_cf_pcmcia: : on irq 54

rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0

bfin-wdt: initialized: timeout=20 sec (nowayout=0)

TCP cubic registered

NET: Registered protocol family 17

Bluetooth: L2CAP ver 2.14

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO (Voice Link) ver 0.6

Bluetooth: SCO socket layer initialized

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM ver 1.11

Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Bluetooth: BNEP filters: protocol multicast

Bluetooth: HIDP (Human Interface Emulation) ver 1.2

rtc-bfin rtc-bfin: setting system clock to 1970-01-03 18:15:26 UTC (238526)

pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0

pcmcia 0.0: pcmcia: registering new device pcmcia0.0

Follow-ups

--- steven miao 2010-08-18 21:28:28

We should drop the test case. It was tested with obsolete extend board.

This case was tested with cf/ide/nand extend board, this card was designed to

connected A13 to CF A0, in the hope it would never access the odd address, but

some card need workaround to resolve the odd address access.

--- Vivi Li 2010-08-18 22:45:45

OK, this test is deleted from test list.

Files

Changes

Commits

Dependencies

Duplicates

Associations