[#7091] bf548-ezkit kernel fail to boot in latest trunk
Submitted By: Vivi Li
Open Date
2012-04-28 05:44:13 Close Date
2012-05-09 22:39:41
Priority:
Medium High Assignee:
steven miao
Status:
Closed Fixed In Release:
N/A
Found In Release:
N/A Release:
Category:
N/A Board:
EZKIT Lite
Processor:
BF548 Silicon Revision:
Is this bug repeatable?:
Yes Resolution:
Fixed
Uboot version or rev.:
Toolchain version or rev.:
gcc4.3-2012_Feb_15_10_55
App binary format:
N/A
Summary: bf548-ezkit kernel fail to boot in latest trunk
Details:
bf548-ezkit kernel fail to boot in latest trunk.
Last passed time: 2012_Apr_19_07_11
--
kernel: Linux release 3.3.0-ADI-2012R1-pre-00364-g31a7cfc, build #186 Thu Apr 19 15:52:34 CST 2012
toolchain: bfin-uclinux-gcc release gcc version 4.3.5 (ADI-trunk/svn-5764)
user-dist: release svn-10654, build #2991 Thu Apr 19 15:51:44 CST 2012
--
Bellow is the error log:
--
U-Boot 2011.09-dirty (ADI-2011R1) (Nov 10 2011 - 17:53:02)
CPU: ADSP bf548-0.0 (Detected Rev: 0.2) (parallel flash boot)
Board: ADI BF548 EZ-Kit board
Support: http://blackfin.uclinux.org/
Clock: VCO: 525 MHz, Core: 525 MHz, System: 131.250 MHz
RAM: 64 MiB
RAM size is 64 MB.
Flash: 16 MiB
NAND: 256 MiB
MMC: Blackfin SDH: 0
In: serial
Out: serial
Err: serial
KGDB: [on serial] ready
Net: smc911x-0
Hit any key to stop autoboot: 5 ^H^H^H 0
bfin> set bootargs root=/dev/mtdblock0 rw ip=10.100.4.50 earlyprintk=serial,uart1,57600 console=ttyBF1,57600
bfin> set serverip 10.100.4.174
bfin> set ipaddr 10.100.4.50
bfin> save
Saving Environment to Flash...
. done
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... 9....8....7....6....5....4....3....2....1....done
. done
Protected 1 sectors
bfin> printenv ethaddr
ethaddr=00:E0:22:FE:BF:4E
bfin> mac address=00:E0:22:FE:BF:4E
tftpboot 0x2000000 uImage
smc911x: detected LAN9218 controller
smc911x: phy initialized
smc911x: MAC 00:e0:22:fe:bf:4e
Using smc911x-0 device
TFTP from server 10.100.4.174; our IP address is 10.100.4.50
Filename 'uImage'.
Load address: 0x2000000
Loading: *^H#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################################
done
Bytes transferred = 5387459 (5234c3 hex)Image size is 5234c3
bfin> run addip
bfin> bootm
## Booting kernel from Legacy Image at 02000000 ...
Image Name: bf548-0.2-3.3.0-ADI-2012R1-pre-0
Created: 2012-04-27 22:25:09 UTC
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 5387395 Bytes = 5.1 MiB
Load Address: 00001000
Entry Point: 00283e90
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting Kernel at = 00283e90
--
Follow-ups
--- steven miao 2012-05-08 02:40:41
fix peripheral pin request hang on bf548
--- Vivi Li 2012-05-09 23:38:24
OK now.
Close it.
Files
Changes
Commits
Dependencies
Duplicates
Associations
Tags
File Name File Type File Size Posted By
config.policy application/octet-stream 45888 Vivi Li