Article [#7262] traps test make kernel panic on bf548-ezkit board

[#7262] traps test make kernel panic on bf548-ezkit board

Submitted By: Mingquan Pan

Open Date

2012-08-16 03:22:38    

Priority:

Medium     Assignee:

Bob Liu

Status:

Open     Fixed In Release:

N/A

Found In Release:

N/A     Release:

Category:

N/A     Board:

N/A

Processor:

BF548     Silicon Revision:

Is this bug repeatable?:

Yes     Resolution:

Not reproducible

Uboot version or rev.:

    Toolchain version or rev.:

ADI-2011R1-RC2

App binary format:

N/A     

Summary: traps test make kernel panic on bf548-ezkit board

Details:

traps test make kernel panic on bf548-ezkit board.

Running test 82 for exception 0x2d: Instruction fetch multiple CPLB hits - Jump to zero

... PASS (test completed 1/1 times, as expected by signal 11: Segmentation fault)

Running test 83 for exception 0x2d: Return to zero

... PASS (test completed 1/1 times, as expected by signal 11: Segmentation fault)

Running test 84 for exception 0x2e: Illegal use of supervisor resource - Instruction

... PASS (test completed 1/1 times, as expected by signal 4: Illegal instruction)

Running test 85 for exception 0x3f: Read of L1 instruction

... External Memory Addressing Error

Kernel OOPS in progress

HW Error context

CURRENT PROCESS:

COMM=traps_test PID=420  CPU=0

TEXT = 0x02d80040-0x02d88fc0        DATA = 0x02d88fe0-0x02d8c7d4

BSS = 0x02d8c7d4-0x02d8cc70  USER-STACK = 0x02d8df48

return address: [0xffa00b62]; contents of:

0xffa00b40:  0171  0174  0172  0175  0166  0140  0167  31c3

0xffa00b50:  0140  017c  017d  017e  0179  0140  017b  6000

0xffa00b60:  3620 [3628] 3630  3638  e108  203c  e148  ffe0

0xffa00b70:  e109  0fbc  e149  ffa0  9341  0023  e108  0b8a

Looks like this was a deferred error - sorry

It might be better to look around here :

-------------------------------------------

ADSP-BF548-0.2 525(MHz CCLK) 131(MHz SCLK) (mpu off)

Linux version 3.5.0-ADI-2012R1-pre-00816-gbffd254 (test@uclinux61-bf548-std) (gcc version 4.3.5 (ADI-2012R1-RC2) ) #36 Wed Aug 15 14:44:58 CST 2012

SEQUENCER STATUS:        Not tainted

SEQSTAT: 0000e000  IPEND: 2d8095e  IMASK: ffff  SYSCFG: 0006

  Global Interrupts Disabled (IPEND[4])

  EXCAUSE   : 0x0

  physical IVG2 asserted : <0xffa00dd8> { _evt_nmi + 0x0 }

  physical IVG3 asserted : <0xffa00774> { _trap + 0x0 }

  interrupts disabled

  physical IVG6 asserted : <0xffa00ddc> { _evt_timer + 0x0 }

  physical IVG8 asserted : <0xffa00e54> { _evt_evt8 + 0x0 }

  physical IVG11 asserted : <0xffa00f08> { _evt_evt11 + 0x0 }

  logical irq   6 mapped  : <0xffa003b4> { _bfin_coretmr_interrupt + 0x0 }

  logical irq   9 mapped  : <0x000d9964> { _bfin_bf54x_irq_error + 0x0 }

  logical irq  14 mapped  : <0x0012f330> { _bfin_rtc_interrupt + 0x0 }

  logical irq  48 mapped  : <0x000e5974> { _bfin_serial_dma_rx_int + 0x0 }

  logical irq  49 mapped  : <0x000e5790> { _bfin_serial_dma_tx_int + 0x0 }

  logical irq  52 mapped  : <0x00131ad4> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  53 mapped  : <0x00131ad4> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  68 mapped  : <0x0010f488> { _bfin_ata_interrupt + 0x0 }

  logical irq  74 mapped  : <0x0013c460> { _sdh_dma_irq + 0x0 }

  logical irq  76 mapped  : <0x0012c888> { _bfin_kpad_isr + 0x0 }

  logical irq  79 mapped  : <0x0013c8e4> { _sdh_stat_irq + 0x0 }

  logical irq 175 mapped  : <0x00129440> { _smsc911x_irqhandler + 0x0 }

RETE: <0x00000000> /* Maybe null pointer? */

RETN: <0x02d76000> /* kernel dynamic memory (maybe user-space) */

RETX: <0x02d81a38> /* kernel dynamic memory (maybe user-space) */

RETS: <0x02d81796> /* kernel dynamic memory (maybe user-space) */

PC  : <0x02d8095e> /* kernel dynamic memory (maybe user-space) */

PROCESSOR STATE:

R0 : 02d8ace0    R1 : 00000055    R2 : 00000001    R3 : 00000008

R4 : 02d89118    R5 : 00000006    R6 : 02d8adb4    R7 : 02d8ded4

P0 : 00000550    P1 : 02d89154    P2 : ffa10000    P3 : 00000001

P4 : 02d8df4c    P5 : 02d8c588    FP : 02d8ded8    SP : 02d75f24

LB0: 02d83057    LT0: 02d83056    LC0: 00000000

LB1: 02d8397f    LT1: 02d83978    LC1: 00000000

B0 : 00000000    L0 : 00000000    M0 : 00000004    I0 : 02d8da90

B1 : 00000000    L1 : 00000000    M1 : 00000000    I1 : 02d89000

B2 : 00000000    L2 : 00000000    M2 : 00000000    I2 : 00000000

B3 : 00000000    L3 : 00000000    M3 : 00000000    I3 : 00000000

A0.w: 00000000   A0.x: 00000000   A1.w: 00000000   A1.x: 00000000

USP : 02d8dcf0  ASTAT: 02001004

-------------------------------------------

ADSP-BF548-0.2 525(MHz CCLK) 131(MHz SCLK) (mpu off)

Linux version 3.5.0-ADI-2012R1-pre-00816-gbffd254 (test@uclinux61-bf548-std) (gcc version 4.3.5 (ADI-2012R1-RC2) ) #36 Wed Aug 15 14:44:58 CST 2012

SEQUENCER STATUS:        Not tainted

SEQSTAT: 0000e03f  IPEND: 8030  IMASK: ffff  SYSCFG: 0006

  Global Interrupts Disabled (IPEND[4])

  HWERRCAUSE: 0x3

  EBIU Error Reason  : 0x0008

  EBIU Error Address : 0xffa10000

  EXCAUSE   : 0x3f

  interrupts disabled

  physical IVG5 asserted : <0xffa00cc0> { _evt_ivhw + 0x0 }

  physical IVG15 asserted : <0xffa00b08> { _schedule_and_signal + 0x0 }

  logical irq   6 mapped  : <0xffa003b4> { _bfin_coretmr_interrupt + 0x0 }

  logical irq   9 mapped  : <0x000d9964> { _bfin_bf54x_irq_error + 0x0 }

  logical irq  14 mapped  : <0x0012f330> { _bfin_rtc_interrupt + 0x0 }

  logical irq  48 mapped  : <0x000e5974> { _bfin_serial_dma_rx_int + 0x0 }

  logical irq  49 mapped  : <0x000e5790> { _bfin_serial_dma_tx_int + 0x0 }

  logical irq  52 mapped  : <0x00131ad4> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  53 mapped  : <0x00131ad4> { _bfin_twi_interrupt_entry + 0x0 }

  logical irq  68 mapped  : <0x0010f488> { _bfin_ata_interrupt + 0x0 }

  logical irq  74 mapped  : <0x0013c460> { _sdh_dma_irq + 0x0 }

  logical irq  76 mapped  : <0x0012c888> { _bfin_kpad_isr + 0x0 }

  logical irq  79 mapped  : <0x0013c8e4> { _sdh_stat_irq + 0x0 }

  logical irq 175 mapped  : <0x00129440> { _smsc911x_irqhandler + 0x0 }

RETE: <0x00000000> /* Maybe null pointer? */

RETN: <0x02d76000> /* kernel dynamic memory (maybe user-space) */

RETX: <0x02d81a38> /* kernel dynamic memory (maybe user-space) */

RETS: <0x02d81796> /* kernel dynamic memory (maybe user-space) */

PC  : <0xffa00b62> { _schedule_and_signal + 0x5a }

PROCESSOR STATE:

R0 : 00000000    R1 : 00000055    R2 : 00000001    R3 : 00000008

R4 : 02d89118    R5 : 00000006    R6 : 02d8adb4    R7 : 02d8ded4

P0 : 00000550    P1 : 02d89154    P2 : ffa10000    P3 : 00000001

P4 : 02d8df4c    P5 : 02d8c588    FP : 02d8ded8    SP : 02d75e48

LB0: 02d83057    LT0: 02d83056    LC0: 00000000

LB1: 02d8397f    LT1: 02d83978    LC1: 00000000

B0 : 00000000    L0 : 00000000    M0 : 00000004    I0 : 02d8da90

B1 : 00000000    L1 : 00000000    M1 : 00000000    I1 : 02d89000

B2 : 00000000    L2 : 00000000    M2 : 00000000    I2 : 00000000

B3 : 00000000    L3 : 00000000    M3 : 00000000    I3 : 00000000

A0.w: 00000000   A0.x: 00000000   A1.w: 00000000   A1.x: 00000000

USP : 02d8dcf0  ASTAT: 02001004

Hardware Trace:

   0 Target : <0x00004068> { _trap_c + 0x0 }

     Source : <0xffa00d6a> { _evt_ivhw + 0xaa } CALL pcrel

   1 Target : <0xffa00d4c> { _evt_ivhw + 0x8c }

     Source : <0xffa00d3e> { _evt_ivhw + 0x7e } IF !CC JUMP pcrel

   2 Target : <0xffa00cc0> { _evt_ivhw + 0x0 }

      FAULT : <0xffa00b60> { _schedule_and_signal + 0x58 } 0x3620

   3 Target : <0xffa00b08> { _schedule_and_signal + 0x0 }

     Source : <0xffa00dd6> { _evt_ivhw + 0x116 } RTI

   4 Target : <0xffa00d82> { _evt_ivhw + 0xc2 }

     Source : <0xffa00a46> { _ret_from_exception + 0x66 } RTS

   5 Target : <0xffa009e0> { _ret_from_exception + 0x0 }

     Source : <0xffa00d7e> { _evt_ivhw + 0xbe } JUMP.L

   6 Target : <0xffa00d6e> { _evt_ivhw + 0xae }

     Source : <0x00004192> { _trap_c + 0x12a } RTS

Kernel Stack

Stack info:

SP: [0x02d75df0] <0x02d75df0> /* kernel dynamic memory (maybe user-space) */

Memory from 0x02d75df0 to 02d76000

02d75df0:[02d8ded8] 00017e64  024bf8f8  02a864e4  02a862e0  02d75e7c  00000000  00000007

02d75e10: 00000000  00000000  00000000  00000000  00000001  ffa00d6e  02d8c588  02d8ded4

02d75e30: 02d8adb4  00000006  02d89118  02d75e7c  00000013  02d8dcf0  02d81a38  00008030

02d75e50: 0000e03f  00000000  02d76000  02d81a38  ffa00b62 <02d81796> 00000000  02001004

02d75e70: 02d8397f  02d83057  02d83978  02d83056  00000000  00000000  00000000  00000000

02d75e90: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02d75eb0: 00000000  00000000  00000000  00000000  00000000  00000004  00000000  00000000

02d75ed0: 02d89000  02d8da90  02d8dcf0  02d8ded8  02d8c588  02d8df4c  00000001  ffa10000

02d75ef0: 02d89154  00000550  02d8ded4  02d8adb4  00000006  02d89118  00000008  00000001

02d75f10: 00000055  00000000  00000000  00000550  00000006  02d8095e  02d8095e  0000e000

02d75f30: 00000000  02d76000  02d81a38  02d8095e <02d81796> 02d8ace0  02001004  02d8397f

02d75f50: 02d83057  02d83978  02d83056  00000000  00000000  00000000  00000000  00000000

02d75f70: 00000000  00000000  00000000  00000000  00000000  00000000  00000000  00000000

02d75f90: 00000000  00000000  00000000  00000000  00000004  00000000  00000000  02d89000

02d75fb0: 02d8da90  02d8dcf0  02d8ded8  02d8c588  02d8df4c  00000001  ffa10000  02d89154

02d75fd0: 00000550  02d8ded4  02d8adb4  00000006  02d89118  00000008  00000001  00000055

02d75ff0: 02d8ace0  02d8ace0  00000550  00000006

Return addresses in stack:

    address : <0x02d81796> /* kernel dynamic memory (maybe user-space) */

    address : <0x02d81796> /* kernel dynamic memory (maybe user-space) */

Modules linked in:

Kernel panic - not syncing: Kernel exception

U-Boot 2011.09-00244-gfec3c97-dirty (ADI-2012R1-pre) (Jul 23 2012 - 06:45:39)

CPU:   ADSP bf548-0.0 (Detected Rev: 0.2) (parallel flash boot)

Board: ADI BF548 EZ-Kit board

       Support: http://blackfin.uclinux.org/

Clock: VCO: 525 MHz, Core: 525 MHz, System: 131.250 MHz

RAM:   64 MiB

Flash: 16 MiB

NAND:  256 MiB

MMC:   Blackfin SDH: 0

In:    serial

Out:   serial

Err:   serial

KGDB:  [on serial] ready

Net:   smc911x-0

Hit any key to stop autoboot:  0

smc911x: detected LAN9218 controller

smc911x: phy initialized

smc911x: MAC 00:e0:22:fe:bf:4e

Using smc911x-0 device

TFTP from server 10.100.4.174; our IP address is 10.100.4.50

Filename 'uImage'.

Load address: 0x1000000

Loading: #################################################################

     #################################################################

     #################################################################

     #################################################################

     #################################################################

     ###########################################

done

Bytes transferred = 5396046 (52564e hex)

## Booting kernel from Legacy Image at 01000000 ...

   Image Name:   bf548-0.2-3.5.0-ADI-2012R1-pre-0

   Created:      2012-08-15   6:45:06 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    5395982 Bytes = 5.1 MiB

   Load Address: 00001000

   Entry Point:  00291f30

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 00291f30

Linux version 3.5.0-ADI-2012R1-pre-00816-gbffd254 (test@uclinux61-bf548-std) (gcc version 4.3.5 (ADI-2012R1-RC2) ) #36 Wed Aug 15 14:44:58 CST 2012

register early platform devices

bootconsole [early_shadow0] enabled

bootconsole [early_BFuart1] enabled

early printk enabled on early_BFuart1

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

  fixedcode = 0x00000400-0x00000490

  text      = 0x00001000-0x001bcda8

  rodata    = 0x001bcda8-0x00251ac0

  bss       = 0x00252000-0x002646a8

  data      = 0x002646c0-0x00288000

    stack   = 0x00286000-0x00288000

  init      = 0x00288000-0x009f3000

  available = 0x009f3000-0x03e00000

  DMA Zone  = 0x03e00000-0x04000000

Hardware Trace active and enabled

Boot Mode: 1

Recovering from Watchdog event

Blackfin support (C) 2004-2010 Analog Devices, Inc.

Compiled for ADSP-BF548 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 525 MHz core clock and 131 MHz System Clock

NOMPU: setting up cplb tables

Instruction Cache Enabled for CPU0

  External memory: cacheable in instruction cache

  L2 SRAM        : uncacheable in instruction cache

Data Cache Enabled for CPU0

  External memory: cacheable (write-through) in data cache

  L2 SRAM        : uncacheable in data cache

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 15748

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart1,57600 console=tty0 console=ttyBF1,57600 ip=10.100.4.50:10.100.4.174:10.100.4.174:255.255.255.0:bf548-ezkit:eth0:off

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory available: 52692k/65536k RAM, (7596k init code, 1775k kernel code, 813k data, 2048k dma, 612k reserved)

NR_IRQS:295

Configuring Blackfin Priority Driven Interrupts

Šconsole [ttyBF1] enabled, bootconsole disabledrly

console [ttyBF1] enabled, bootconsole disabled

Calibrating delay loop... 1044.48 BogoMIPS (lpj=2088960)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Blackfin Scratchpad data SRAM: 4 KB

Blackfin L1 Data A SRAM: 16 KB (16 KB free)

Blackfin L1 Data B SRAM: 16 KB (16 KB free)

Blackfin L1 Instruction SRAM: 48 KB (41 KB free)

Blackfin L2 SRAM: 128 KB (128 KB free)

NET: Registered protocol family 16

Blackfin DMA Controller

ezkit_init(): registering device resources

bio: create slab <bio-0> at 0

SCSI subsystem initialized

bfin-spi bfin-spi.0: master is unqueued, this is deprecated

spi spi0.2: Warning: SPI CPHA not set: Slave Select not under software control!

See Documentation/blackfin/bfin-spi-notes.txt

bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs@ffc00500, dma channel@4

bfin-spi bfin-spi.1: master is unqueued, this is deprecated

bfin-spi bfin-spi.1: Blackfin on-chip SPI Controller Driver, Version 1.0, regs@ffc02300, dma channel@5

i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc00700

i2c-bfin-twi i2c-bfin-twi.1: Blackfin on-chip I2C TWI Contoller, regs_base@ffc02200

Advanced Linux Sound Architecture Driver Version 1.0.25.

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP: reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

debug-mmrs: setting up Blackfin MMR debugfs

msgmni has been set to 102

io scheduler noop registered (default)

bf54x-lq043: FrameBuffer initializing...

dma_alloc_init: dma_page @ 0x029f7000 - 512 pages at 0x03e00000

bfin-uart: Blackfin serial driver

bfin-uart.1: ttyBF1 at MMIO 0xffc02000 (irq = 48) is a BFIN-UART

bfin-otp: initialized

brd: module loaded

register bfin atapi driver

scsi0 : pata-bf54x

ata1: PATA max UDMA/66 irq 68

physmap platform flash device: 02000000 at 20000000

physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x00881e

Intel/Sharp Extended Query Table at 0x010A

Intel/Sharp Extended Query Table at 0x010A

Intel/Sharp Extended Query Table at 0x010A

Intel/Sharp Extended Query Table at 0x010A

Intel/Sharp Extended Query Table at 0x010A

Using buffer write method

Using auto-unlock on power-up/resume

cfi_cmdset_0001: Erase suspend on write enabled

Creating 5 MTD partitions on "physmap-flash.0":

0x000000000000-0x000000080000 : "bootloader(nor)"

0x000000080000-0x000000480000 : "linux kernel(nor)"

0x000000480000-0x000000fe0000 : "file system(nor)"

0x000000fe0000-0x000000ff8000 : "config(nor)"

0x000000ff8000-0x000001000000 : "u-boot env(nor)"

m25p80 spi0.1: m25p16 (2048 Kbytes)

Creating 2 MTD partitions on "m25p80":

0x000000000000-0x000000080000 : "bootloader(spi)"

0x000000080000-0x000000200000 : "linux kernel(spi)"

ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100

ata1.00: 78140160 sectors, multi 16: LBA

BF5xx on-chip NAND FLash Controller Driver, Version 1.2 (c) 2007 Analog Devices, Inc.

bf5xx-nand bf5xx-nand.0: data_width=8, wr_dly=3, rd_dly=3

NAND device: Manufacturer ID: 0x20, Chip ID: 0xda (ST Micro NAND 256MiB 3,3V 8-bit), page size: 2048, OOB size: 64

ata1.00: configured for UDMA/66

scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2040A 0000 PQ: 0 ANSI: 5

sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":

0x000000000000-0x000000080000 : "bootloader(nand)"

0x000000080000-0x000000480000 : "linux kernel(nand)"

0x000000480000-0x000010000000 : "file system(nand)"

smsc911x: Driver version 2008-10-21

smsc911x-mdio: probed

smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=smsc911x-0:01, irq=-1)

smsc911x smsc911x.0: eth0: MAC Address: 00:e0:22:fe:bf:4e

input: bf54x-keys as /devices/platform/bf54x-keys/input/input0

rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0

i2c /dev entries driver

bfin_wdt: initialized: timeout=20 sec (nowayout=0)

TCP: cubic registered

NET: Registered protocol family 17

mmc0: host does not support reading read-only switch. assuming write-enable.

mmc0: new SD card at address e624

sda: sda1 sda2

sd 0:0:0:0: [sda] Attached SCSI disk

rtc-bfin rtc-bfin: setting system clock to 2004-05-31 13:00:59 UTC (1086008459)

smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0x24000000, IRQ: 175

IP-Config: Complete:

     device=eth0, addr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174

     host=bf548-ezkit, domain=, nis-domain=(none)

     bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=

ALSA device list:

  No soundcards found.

Freeing unused kernel memory: 7596k freed

                           _____________________________________

        a8888b.           / Welcome to the uClinux distribution \

       d888888b.         /       _     _                         \

       8P"YP"Y88        /       | |   |_|            __  __ (TM)  |

       8|o||o|88  _____/        | |    _ ____  _   _ \ \/ /       |

       8'    .88       \        | |   | |  _ \| | | | \  /        |

       8`._.' Y8.       \       | |__ | | | | | |_| | /  \        |

      d/      `8b.       \      \____||_|_| |_|\____|/_/\_\       |

     dP   .    Y8b.       \   For embedded processors including   |

    d8:'  "  `::88b        \    the Analog Devices Blackfin      /

   d8"         'Y88b        \___________________________________/

  :8P    '      :888

   8a.   :     _a88P         For further information, check out:

._/"Yaa_:   .| 88P|            - http://blackfin.uclinux.org/

\    YP"    `| 8P  `.          - http://docs.blackfin.uclinux.org/

/     \.___.d|    .'           - http://www.uclinux.org/

`--..__)8888P`._.'  jgs/a:f    - http://www.analog.com/blackfin

Have a lot of fun...

BusyBox v1.18.4 (2012-08-15 13:24:12 CST) hush - the humble shell

root:/>

Last passed time: 2012_Aug_12_03_11.

Uclinux-dist version: 10770.

Kernel verion: , Git-id is not found!

Case 2 ...FAIL

Follow-ups

--- Bob Liu                                                  2012-08-22 04:57:10

can't reproduce

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

File Name     File Type     File Size     Posted By

No Files Were Found

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.