The BF548 EZ-KIT Lite schematic is missing the Debug Agent interface. Is this part of the schematic available?
The Debug Agent (USB debugger) interface on the EZ-KIT Lite is proprietary. This is implemented by the FPGA and, on newer EZ-KIT Lites, additional BF535 processor.
What is not shown on the schematics:The EZ-Kit includes hardware consisting of an FPGA on older EZ-KIT Lites, and a BF535 on newer EZ-KIT Lites, which implements two different main functions. It implements a proprietary USB debugger interface for communication between the board and the host PC as well as also implementing a serial port interface for communication between the DSPs and the on-board converters.
Further details of the FPGA/BF535 interface (software and hardware) of this undisclosed section of the EZ-Kit Lite are proprietary and cannot be made available.
Additionally, board design information for all released products can be found via the "EZ-KIT Lite Design Database" link on the Product Information page for the appropriate EZ-KIT Lite, as well as being available at the following locations:
21xx Board Design Database
TigerSHARC Board Design Database
SHARC Board Design Database
Blackfin Board Design Database
Please refer to the Readme.txt for a description of the contents of the ZIP files.
This FAQ was generated from the following thread: Why are certain portions of my EZ-KIT Lite schematics missing or not shown?