Using Two ICE-1000 Emulators Simultaneously on One PC

Hi,

Unfortunately, CCES does not support connecting the target using two emulators (Two ICE-1000) simultaneously on the same PC.

However, you can create two different platforms to set up two emulators and program two boards from single machine. For example, if you select Platform 0, setup 1 can be connected, and if you select Platform 1, setup 2 can be connected.

Please refer to the linked Ezone thread below to learn about connecting the target using two ICE-1000 emulators:
https://ez.analog.com/dsp/software-and-development-tools/cces/f/q-a/548259/multiple-debug-session-on-single-pc

Hope this helps.

Regards,
Santhakumari.V

Hi,

Unfortunately, CCES does not support connecting the target using two emulators (Two ICE-1000) simultaneously on the same PC.

However, you can create two different platforms to set up two emulators and program two boards from single machine. For example, if you select Platform 0, setup 1 can be connected, and if you select Platform 1, setup 2 can be connected.

Please refer to the linked Ezone thread below to learn about connecting the target using two ICE-1000 emulators:
https://ez.analog.com/dsp/software-and-development-tools/cces/f/q-a/548259/multiple-debug-session-on-single-pc

Hope this helps.

Regards,
Santhakumari.V