Since there is no audio CODEC or ADC/DAC present in the ADSP-BF707 Ez- Kit. I was not be able to run analog input analog output talkthru code with this.
Now, I am using ADSP-BF707 board which connect to the ADZS-AUDIO-EX3 for getting I2S data ,still I am not able to get the audio output?
Does ADZS-AUDIO-EX3 supports ADSP-BF707 Blackfin processor?.
Hi,Yes, ADZS-AUDIO-EX3 supports ADSP-BF707 Blackfin processor.We have tried with our example project we could able to get the audio output.You might have a look at the examples for EVAL-AUDIO-EX3 with ADSP-BF707 in the below path after installing the Board Support Package for Audio EI3 Extender .<installation_path>\Analog Devices\Audio_EI3_Extender_Board-Rel1.1.0\Audio_EI3\Blackfin\Examples\ADSP-BF707You can download BSP for Audio EI3 Extender from the below link:download.analog.com/.../ADI_Audio_EI3_Extender_Board-Rel1.1.0.exeRegards,Nishanthi.V
I am using the same supporting package which you have mentioned above,
This has the following example codes
I am running the above Memoryplayback code in CCES 2.9.1 version , but I am not able to get the output.
Thankyou Nishanthi for your support.
The issue has been solved.