Failed to flash Project on ADZS-SC584-EZLITE

Hello everyone,

I´m using the ADZS-SC584-EZLITE and have found a video on the Analog Devices Website how to create a Bootstream.

With this example I tried to flash my own Programm on the Targetboard.

I created a Loader-File, and used the Command Line Device Programmer (CLDP) to flash the Programm into the Board´s Memory.

You can see my Loader-Configuration in the attached pictures below.

My Configuration-File (Config_dat.txt) got the following instructions for the CLDP:

-proc ADSP-SC584 -emu ICE-1000 -driver "C:\Analog Devices\ADSP-SC5xx_EZ-KIT_Lite-Rel2.0.2\ADSP-SC5xx_EZ-KIT\Examples\Device_Programmer\sc584\sharc\sc584_w25q128fv_dpia_Core1\sc584_w25q128fv_dpia_Core1.dxe" -cmd info -cmd prog -erase affected -format hex -file "C:\Users\Administrator.KH-WS265\Desktop\LDR-erstellen_Test\LDR_Neuer_Workspace\LDR-ERSTELLEN_Core0\Debug\LDR-ERSTELLEN_Core0.ldr" -cmd compare -format hex -file "C:\Users\Administrator.KH-WS265\Desktop\LDR-erstellen_Test\LDR_Neuer_Workspace\LDR-ERSTELLEN_Core0\Debug\LDR-ERSTELLEN_Core0.ldr"

After running the CLDP via Console Command the following Error occur:

I already tried to use this application in another workspace but the same error still remain.

Can somebody help me pls.