no-OS Drivers for battery monitoring chips

Hi Djuric,

You cannot directly develop a no-OS project using CFS, as Zephyr RTOS and MSDK are integrated into it. However, to build and debug a no-OS project using VSCode, you can follow the steps below:

1. Download and install VSCode. 
2. Clone NO-OS repository with submodules via the --recursive flag: git clone --recursive https://github.com/analogdevicesinc/no-OS
3. Open Git Bash as Administrator and run the following script located in the no-OS directory: tools/scripts/git-bash.sh. Then close the window.
4. Enable Windows Developer Mode to allow symbolic links.
5. Install the Maxim Micros SDK.

This setup only needs to be done once. After that, you can follow this procedure per project:

1. Open VSCode in your project folder. For example, $ cd no-OS/projects/your_project_name
2. Open a new Git Bash terminal inside VSCode.
3. Set the MAXIM_LIBRARIES environment variable again by running: $ export MAXIM_LIBRARIES=/C/MaximSDK/Libraries
4. Build the project. There are lots of make option that come with no-OS repository. You can find them here.
5. Flash the binary to your target.

Once this is done, you can develop, build, and debug your code directly in VSCode.

For more information, please visit the following links.

https://github.com/analogdevicesinc/no-OS

https://wiki.analog.com/resources/no-os

Haluk

Ok, thanks for the reply.
I saw that the VSCode-Maxim project was integrated into the CodeFusion Studio, so I thought it would now be possible to utilize the no-os examples via the CFS.

https://github.com/analogdevicesinc/VSCode-Maxim/releases

Ok, thanks for the reply.
I saw that the VSCode-Maxim project was integrated into the CodeFusion Studio, so I thought it would now be possible to utilize the no-os examples via the CFS.

https://github.com/analogdevicesinc/VSCode-Maxim/releases