How to change sample rate to 192 KHz in SigmaStudioForSHARC 2.2.0 (ADSP-213xx & ADSP-214xx) Audit

Question: How to change sample rate to 192 kHz in SigmaStudioForSHARC 2.2.0 (ADSP-213xx & ADSP-214xx) Answer: When we change the sample rate in schematic window as 192KHz, SigmaStudio computes the parameters of filters, oscillators, etc. to work at that sample rate. But the application that runs on the SHARC EZ-BOARD continues to sample and process audio at the default sampling rate which is 48 KHz. Hence, we need to change the sampling rate of the application that runs on the EZ-BOARD in addition to changing the sampling rate in SigmaStudio. Please refer the SigmaStudio_for_SHARC_Framework.pdf which is available in the following installation path C:\Analog Devices\SoftwareModules\SigmaStudioForSHARC-SH-Rel2.2.0\Docs for details on how to change the application sampling rate to 192 KHz.

Does SigmaStudio support 212xx processors Audit

Question: Does SigmaStudio support 212xx processors. Answer: SigmaStudio is not supported ADSP-212xx series of SHARC processors. It is supported only ADSP-213xx, ADSP-214xx and ADSP-SC5xx and 215xx series of SHARC processors.