DDR access

Hi,

We are unable to simulate this issue and we can be able to access the DDR address 0x80000000 and write it.

Could you please share us the screenshot of the error and along with the project if possible. This will help us to assist further.

Regards,
Santhakumari.V

Hi,

The code can read and write DDR.But the "Memory Browser" shows all zeros.

Regards,

Bingo

Hi Bingo,

Apologies for the inconvenience.

This issue has been observed from CCES version 3.0.2, and we are forwarding this to our internal team for further investigation.

Also, the issue seems to occur at the beginning of the DDR address. If you try to access some address far (e.g, 0x80000100), it is working fine.

However, if possible, we recommend using CCES version 3.0.1 as a temporary workaround.

You can find the link from the below FAQ.
Legacy CCES download links 

Regards,
Santhakumari.V

Hi Bingo,

Apologies for the inconvenience.

This issue has been observed from CCES version 3.0.2, and we are forwarding this to our internal team for further investigation.

Also, the issue seems to occur at the beginning of the DDR address. If you try to access some address far (e.g, 0x80000100), it is working fine.

However, if possible, we recommend using CCES version 3.0.1 as a temporary workaround.

You can find the link from the below FAQ.
Legacy CCES download links 

Regards,
Santhakumari.V