Not able to select Emulator as target in CrossCore Embedded Studio

Hi Gabe,

We have noticed that you have already been in touch with our private support team, and your query has been addressed there.

Please carry on the conversation there to prevent duplicating efforts.

Thank you for your cooperation.

Regards,
Nishanthi.V

Would it be helpful to share the answer here since it was not readily available online?

Hi,

We are posting the response here for others benefits.

For EZ-Kits sold as a single board, the license gives appropriate connection capabilities to the board. For parts supported by a SOM and Carrier Board, the intention is that customers purchase both the SOM and Carrier Board, and so the kit license would give connection via the debug agent on the carrier board. The SOM/Carrier Board split is useful if you later come to buy a different SOM, in which case the carrier board could be re-used with the new SOM.

This information is also available on the product page at the following link:
www.analog.com/.../ev-sc594-som.html

The overview is as follows:
1. SOM Only - Requires an ICE and a CCES license!
2. SOM + Carrier - Allows the use of the debug agent (on the carrier) or JTAG (on the SOM) with a CCES license.

In your situation, you must either utilize an evaluation license or consider purchasing a full license. Alternatively, you can acquire the carrier board and utilize the EZ-KIT license included in the package.

An evaluation license can be obtained from CrossCore Embedded Studio,which offers a tool chain evaluation license the first time it runs. It can be activated once on a particular machine for 90 days.

Please refer the below FAQ to obtain evaluation license for CCES
FAQ: How can I obtain and install a license for CrossCore Embedded Studio?
ez.analog.com/.../faq-how-can-i-obtain-and-install-a-licenses-for-crosscore-embedded-studio

Regards,
Nishanthi.V