Products Mentioned

ADSP-BF707 Production
This device is a member of the ADSP-BF70x Blackfin Digital Signal Processor (DSP) product family. The new Blackfin+ processor core combines dual-MAC 16...
Datasheet
ADSP-BF707 on Analog.com

  • State Verified Answer
  • Replies 7 replies
  • Subscribers 36 subscribers
  • Views 533 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
CCES_Runner does not always run successfully



		

			

									
					    mbd7311
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Feb 21, 2024 
				
			
			
		
    

				
		
    
		    		    
		    
		    		      		            		        
    Category: Software
    
    		        		        		        		        
    Software Version: CCES_Runner v2.11.1
    
    		    		    	
			
    We're using CCES_Runner to automate emualtion of our hardware. Our testing is slowed down by the many unsuccessful CCES_Runner runs. More info below.
    

    Setup:
    

      

    • Blackfin 707
      • 

    • ICE-2000 emulator
      • 

    • CCES_Runner (v2.11.1)

        

      • Have used other versions of the tool with the same errors
        • 

      

      • 

    

    Problem: 
    

    Emulation is not always successful. It works maybe 50% of the time. This happens on multiple different PCs. Is this a known issue and is there any way to resolve it. You can assume we have full rights to the PC. I’m thinking maybe something is holding onto a windows or driver resource and not letting it go. The 2 errors we get are the following:
    

      

    1. We get only the following single-line output and the utility exits with code 0xC0000005:
      2. 

    

    Logging level: Full log output
    

    2. We get these 2 lines and the utility exits with error code 0x00000001:
    

    Logging level: Full log output
    

    Error: bad allocation
    

    When we do get successful emulation, the log output looks like the attached document.
    

    



    
    
    
        Fullscreen
        cces_runner log output.txt
        Download
    
    
    
    Logging level: Full log output
Current working directory set to "C:\Users\Public".
CCES version: 2.11.1.
Target type: EMU.
Reset core 0 before load
Creating session...
Enable custom board support: C:\test\customboard.xml
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency: component ICE-2000 using value i17153

State changed for core 0: RUNNING (Reason: Client Request)
State changed for core 0: HALTED (Reason: Client Request)
Reset single core
State changed for core 0: RESET (Reason: Client Request)
State changed for core 0: HALTED
Loading program "C:\Program Files (x86)\Maztech\Resources\Setup\Firmware Files\DSP.dxe" to core 0.
Getting program info for "C:\Program Files (x86)\Maztech\Resources\Setup\Firmware Files\DSP.dxe"
C:\Program Files (x86)\Maztech\Resources\Setup\Firmware Files\DSP.dxe is built for Blackfin architecture with entry address 0x00000000.
Setting breakpoint at symbol "___lib_prog_term" for core 0.
Setting breakpoints on core 0.
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Setting breakpoint for ___lib_prog_term at address 0x84000494.
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Running programs on all cores.
The current working directory is "C:\Users\Public".
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

State changed for core 0: RUNNING (Reason: Client Request)
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1


Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

===================================================================
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

=                    USB DEVICE INITIALIZATION                    =
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

===================================================================
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Initializing USB Device...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

    Adding controller driver ...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

    Adding HS configuration ...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

    Adding FS configuration ...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1


Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

        ===========================================================
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

        Initializing USB classes ...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1


Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

        Initializing Vendor class ...
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

        .... USB classes initialization done.
Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1

Preference: OnExit: component Device1

Preference: VerifyWrites: component Device1

Preference: ResetCounters: component Device1

Preference: UseOpcodeScans: component Device1

Preference: UseXMLResetVals: component Device1

Preference: MaskISROnStep: component Device1

Preference: DoSingleByteMemAccess: component Device1

Preference: HaltOnApp: component Device1

Preference: HaltOnInit: component Device1

Preference: HaltOnCall: component Device1

Preference: HaltOnErr: component Device1

Preference: ResetAddress: component Device1

Preference: JtagFrequency: component ICE-2000

Preference: JtagFrequency set to 23 Mhz (i1)
Preference: HaltPeripherals0: component Device1
    

    


    

    The command line entry is as follows:
    C:\Analog Devices\CrossCore Embedded Studio 2.11.1\CCES_runner.exe --target "Blackfin CS Emulator" --platform "custom_platform" --processor "ADSP-BF707" --core "0,RUN_AFTER_LOAD|C:\test\DSP.dxe" --customboard "C:\test\customboard.xml" -v2
    

    Is this a known issue and is there anyway to resolve it?
    

    Thank you
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 Audio Signal Processors
                
                                                    
                 Audio Products
                
                                                    
                 CCES 2.11.1
                
                                                    
                 software
                
                                                    
                 adsp-bf707
                
                                        
                                            
                
                
                                        
                                            
                
                
                                        
                                            
                
                
                                        
                                            
                
                
                                        
                                            
                
                
                                
                    Show More
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Feb 22, 2024 7:21 AM
            
            
					
      
	
      

		
		
      
					
      Hi,
      

      We are able to run a simple code (Button_LED_GPIO) in our BF707 EZ-KIT board using CCES_Runner utility by multiple times. And there is no known issues in CCES_Runner utility.
      

      So, please answer the below questions. This will help us to assist you further.
      1. Do you have access to any other board to test the same project and check whether you observe the same behavior?
      2. Try to run your same code using CCES IDE and compare success rate of emulation with CCES_Runner.
      3. Do you have access to ADSP-BF707 Ez-kit board to test the same project and check whether you observe the same behavior if possible
      4. Let us know if you are able to run the any other simple projects without any issues using CCES_runner or you are facing issue only with specific project.
      If you are facing issue with specific project, please share us the project.
      

      Awaiting for your reply.
      

      Best Regards,
      Santhakumari.K
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
        
            
						
                            
            
            				
            
                on Feb 22, 2024 12:49 PM
            
            
												
						in reply to santha.vijay
					
									
        
	
        

		
		
        
					
        To answer your questions:
        

        1. Yes, this happens on multiple boards and different BF707 chips
        2. Running in CCES IDE is much more consistently. I've experienced occasional lockups through the CCES IDE but I believe they are more related to the Eclipse based framework and not the CCES emulation portion.
        3. I do not have access to one of these kits but will try to get one.
        4. I'm not sure I can send the project. I will create a simple project to test it out.
        

         
        

        In the meantime, do you know what causes the "Error: bad allocation" message that comes from the CCES_Runner utility. This may point us to our issue.
        
			
        

		
			
	      

		
		
	
        
	
        
		
        
			
		
        
	
        
	
        
		
						
						
				
						
				
				
		
		
        
			
		
        
	
        

        

        • 

	

      • 
	
        



	
		
	
	



        
	
        
		
        
							
					
        
		
        
			
													0
							
			
				
									
							        
			
			
			
        •  Analog Employees  
        
            
						
                            
            
            				
            
                on Feb 23, 2024 6:00 AM
            
            
												
						in reply to mbd7311
					
									
        
	
        

		
		
        
					
        Hi,
        

        We understand that you have already contacted our private support. To avoid duplication of efforts, please continue the discussion there. 
        

        Thanks & regards,
        Santhakumari.K
        
			
        

		
			
	      

		
		
	
        
	
        
		
        
			
		
        
	
        
	
        
		
						
						
				
						
				
				
		
		
        
			
		
        
	
        

        

        • 

	
      



Reply



Children