Post Go back to editing

SPDIF Configuration for ADSP 21573 AVR

FormerMember
FormerMember
Category: Software
Product Number: 21573 AVR
Software Version: CCES 2.8.0

Dear Team,

We are trying to configure SPDIF for I2S Input at the Receiver side i.e. SPDIF RX . However we have little details on how to do this for this particular case.

Is there any SPDIF driver that can be easily integrated or compatible that I can use .

Any help would be appreciated.

Regards,

Hermione



Modified
[edited by: Hermione at 9:32 AM (GMT -4) on 24 Jul 2023]
  • Hi Hermione,

    We recommend to refer "spdif_loopback" example project in ADSP-SC5XX Board Support Package(ADSP-SC573 is similar to ADSP-21573 processor family) which might be helpful to you.

    You can download and install ADSP-SC5XX Board Support Package 2.0.2 from the below link:
    download.analog.com/.../ADI_ADSP-SC5xx_EZ-KIT_Lite-Rel2.0.2.exe

    After successful installation, You can find "spdif_loopback" example project in the below bsp installation path.
    [Installation directory]:\Analog Devices\ADSP-SC5xx_EZ-KIT_Lite-Rel2.0.2\ADSP-SC5xx_EZ-KIT\Examples\drivers\spdif

    For detailed information about example, hardware setup and procedure to run the example, please refer "readme" file available in the example.

    Best Regards,
    Santhakumari.K