How do I find Device Programmer for ADSP-21479 EZKIT when using CrossCore Development ?

Hi,

You can find the device programmer examples from the below linked ADSP-21479 EZKIT Board support Package.
http://download.analog.com/tools/EZBoards/21479/Releases/Release_1.0.0/ADI_ADSP-21479_EZKIT-Rel1.0.0.exe

After the successful installation, You can find the example from the below BSP installation path.

<installation path>:\Analog Devices\ADSP-21479_EZKIT-Rel1.0.0\21479_EZ-Board\Examples\Device_Programmer


Regards,
Nishanthi.V

Hi,

You can find the device programmer examples from the below linked ADSP-21479 EZKIT Board support Package.
http://download.analog.com/tools/EZBoards/21479/Releases/Release_1.0.0/ADI_ADSP-21479_EZKIT-Rel1.0.0.exe

After the successful installation, You can find the example from the below BSP installation path.

<installation path>:\Analog Devices\ADSP-21479_EZKIT-Rel1.0.0\21479_EZ-Board\Examples\Device_Programmer


Regards,
Nishanthi.V

Thank you for sending ADSP-21479 EZKIT BSP. If I need ADSP-21489 EZKIT BSP I could not reach the location ? Why ? And also I have VisualDSP++5.1.2 where there are Flash Programmers (and many examples) for SHARC and Blackfin devices. However CCES only have few examples why ? Where can I download what I need ?

Currently I need ADSP-21489 Parallel Flash Programmer.

Thank you for your support.

Osman

Hi,

You can download ADSP-21489 BSP from the below link:
download.analog.com/.../ADI_ADSP-21489_EZKIT-Rel1.0.0.exe

After installing the BSP successfully,you can get examples in the below path

<Installation path>\Analog Devices\ADSP-21489_EZKIT-Rel1.0.0\21489_EZ-Board\Examples

All the available Board Support Package are provided in the link below:
download.analog.com/.../all_examples.html

Regards,
Nishanthi.V

Dear Nishanthi,

I received both 21479 and 21489 Device Programmer (21489_m29w320_dpia.dxe) that will be used to parallel FLASH programming. I programmed the parallel FLASH (M29W320EB70ZE6E) by using 21479_m29w320_dpia.dxe. It works just fine. Thank you for the help.

One further question is that can I use the same parallel Flash  program (21489_m29w320_dpia.dxe) if I make my own PCB circuit board using same parallel FLASH (M29W320EB70ZE6E) ?

Osman

Hi,

Yes, you can use the flash driver available in the BSP for the flash part M29W320EB70ZE6E used in custom board also.


Regards,
Nishanthi.V