Post Go back to editing

USB communication errors with ADAU1442

Hello,

I am having problems with USB communications errors with the ADAU1442. The first download works correctly, subsequent downloads occasionally work but more often than not fail. Occasionally a download appears ok but is corrupt in some way.

I have the SCK and SDA pins pulled high with 2k2 resistors to 3V3. The only other device on the I2C bus is the self boot memory. All traces are gaurded and signal integrity looks fine.

Suggestions please?

Cheers

Ian.

Parents
  • I wonder if you tried with selfboot pulled low - cos when you press reset, the dsp will set itself master and start loading data from the flash, during which you have two masters on the bus if they are both talking at the same time. The other thing I could think of is to disable all the input and output bclks/lrcks and see if the dsp can generate a sine tone by using the internal bclk/lrck.

Reply
  • I wonder if you tried with selfboot pulled low - cos when you press reset, the dsp will set itself master and start loading data from the flash, during which you have two masters on the bus if they are both talking at the same time. The other thing I could think of is to disable all the input and output bclks/lrcks and see if the dsp can generate a sine tone by using the internal bclk/lrck.

Children
No Data